Crucial Warning: Do not cross-flash packages between 5026D (Global Dual-SIM) and 5026A (Latin America Single/Dual-SIM). Flashing regional carrier modem partitions can lock network functionality or erase baseband calibrations. In SP Flash Tool, never select "Format All + Download"; always use "Download Only" to preserve your factory NVRAM, proinfo, and valid IMEI numbers.
Alcatel 3C (5026D / 5026A) Official Firmware Downloads
Global & European Releases (5026D) 3 packages
Alcatel_3C_5026D_Factory_170627_8.0.zip
Official factory service unbrick archive with complete MT8321 partition binaries and scatter file for SP Flash Tool. Recommended for unbricking bootloops and full partition restoration.
⬇️ Download via Google DriveALCATEL_5026D_FACTORY_9.0_FIRMWARE_SDCARD_OTA.zip
Official factory maintenance OTA update package designed for on-device installation via stock recovery or FAT32 microSD card.
⬇️ Download via Google DriveLG SISTEMAS ROM ALCATEL 3C 5026D ANDROID 9.0 .rar
Community maintenance scatter ROM featuring Android 9.0 Pie base. Sourced with verified MD5 checksum c530cbb953744f45391141b510a8078f on AndroidFileHost.
MD5: c530cbb953744f45391141b510a8078f
Latin America Carrier Releases (5026A) 1 package
MT6580_EMMC_NRD90M__7_0_5026A_TCL_2020_09_07_13_20)_ALCATEL_5026A_MOVISTAR_MX.zip
Official factory eMMC readback / scatter archive for model 5026A on Movistar Mexico. Based on Android 7.0 Nougat (NRD90M), compiled on 2020-09-07. Contains operator customizations and baseband radio partitions.
⬇️ Download via Google DriveSP Flash Tool & Recovery Restoration Roadmap
- Download Factory Scatter Archive
- Launch SP Flash Tool on Windows
- Select Download Only Mode
- Connect Powered-Off Handset
- Wait for Green Checkmark Confirmation
Hardware Triage & Preloader VCOM Preparation
- Verify your exact phone model (5026D or 5026A) printed under the rear cover or inside Settings > About phone.
- Install MediaTek Preloader USB VCOM drivers on a Windows PC (Windows 10/11 requires disabling driver signature enforcement).
- Download SP Flash Tool v5.1824 or newer compatible with MT8321 / MT6580 architectures.
- When extracting Alcatel_3C_5026D_Factory_170627_8.0.zip, choose a short destination path such as C:Alcatel to prevent Windows path truncation.
- Use a certified microUSB cable connected directly to a rear motherboard USB 2.0 port.
- Ensure the 3,000 mAh battery holds at least 50% charge before initiating partition writing.
Model Identification & Regional Variant Demarcation
MediaTek MT8321 flashing via SP Flash Tool communicates directly with internal eMMC storage in BROM / Preloader mode without requiring bootloader unlocking. Always use "Download Only" mode to prevent NVRAM partition loss.
Ready to Flash This Firmware?
Full step-by-step instructions for Alcatel 3C, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's SP Flash Tool guide.
Can also be flashed via Local Update (On-Device): Open Local Update (On-Device) Guide →
Alcatel 3C Architecture & Archival FAQ
The 5026D is the global and European dual-SIM model, configured for European 3G bands (900/2100 MHz) with an open unbranded modem profile. The 5026A is tailored for Latin American operators (such as Movistar Mexico and Telcel), often carrying single-SIM firmware or carrier-specific radio calibrations (850/1900/2100 MHz). Cross-flashing modem partitions between them will cause "No Service" or baseband errors.
Alcatel implements a signed secure boot handshake on MT8321 platforms. Standard SP Flash Tool releases require an authorized Download Agent file (DA_SWSEC.bin or custom Alcatel DA) or an MTK bypass utility to disable SLA/DA security before the BROM handshake will accept raw partition writes.
The Alcatel 3C hardware features 1 GB of LPDDR3 RAM and 16 GB of eMMC 4.5 storage. While custom Android 9.0 Pie builds (like the LG Sistemas maintenance ROM) provide updated API levels, the limited 1 GB RAM requires aggressive memory management. For general stability, the stock Android 7.1 Nougat factory firmware delivers the most reliable daily performance.
Selecting "Format All + Download" completely wipes the eMMC storage controller, including the factory-calibrated NVRAM and proinfo blocks. This erases the device IMEI numbers, Wi-Fi MAC address, and baseband radio parameters, resulting in an "Invalid IMEI" error that prevents mobile network registration.