Crucial Warning: Confirm the model on the back sticker under the battery reads S750P before downloading. Flashing this MediaTek MT6580 firmware on other BLU Studio variants with different model numbers or chipsets can cause a permanent bootloop.
Download Firmware for BLU Studio Pro
BLU_S750P_V7.0.04.00_REPAIR.rar
Full factory repair package for BLU Studio Pro S750P. Ideal for recovering deeply bricked devices and wiping corrupt system partitions.
⬇️ Download via MediaFireBLU_S750P_V7.0.03.03_GENERIC.rar
Standard factory stock firmware release. Contains full partition set and scatter index for restoring stock Android 7.0.
⬇️ Download via MediaFireFlashing Overview for BLU Studio Pro
- Verify model S750P on the label under the phone battery
- Download and extract your chosen firmware RAR archive using WinRAR or 7-Zip
- Install MediaTek USB VCOM drivers on your Windows PC
- Launch SP Flash Tool as administrator and click Choose on Scatter-loading File
- Select MT6580_Android_scatter.txt from inside the extracted firmware folder
- Ensure Download Only mode is selected and click the Download button
- Turn off the phone, remove and reinsert the battery, and connect the USB cable without pressing any keys
- Wait for the green checkmark (Download OK) before disconnecting
Expand preparation checklist for BLU Studio Pro
- Remove the back cover and confirm model S750P on the battery compartment label.
- Install MediaTek USB VCOM and Preloader drivers on your Windows computer.
- Download and extract SP Flash Tool (v5.x recommended for MT6580).
- Charge the battery to at least 40% before connecting.
- Use a clean microUSB cable plugged into a direct rear USB port on the PC.
- Back up any accessible personal data before flashing.
Compatibility & Bootloader Notes
Flashing via SP Flash Tool writes partition images over the MediaTek boot ROM (BROM) and Preloader interface. Bootloader unlocking is not required for flashing official factory firmware packages.
Ready to Flash This Firmware?
Full step-by-step instructions for BLU Studio Pro, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's SP Flash Tool guide.
Frequently Asked Questions
The BLU Studio Pro S750P is built on the 32-bit MediaTek MT6580 platform (ARM Cortex-A7 quad-core with Mali-400 GPU). Its partition layout uses an MT6580_Android_scatter.txt descriptor file.
The GENERIC build represents the standard retail software release. The REPAIR build is a later factory service package that includes complete raw partition binaries designed to recover devices with heavily corrupted file structures or persistent boot loops.
No. SP Flash Tool communicates directly with MediaTek hardware via BROM / Preloader mode before the Android bootloader initializes. You do not need to unlock the bootloader to flash stock factory packages.