Crucial Warning: Confirm your phone is specifically the DOOGEE X90L (4G LTE model with MT6739) and not the standard DOOGEE X90 (3G model powered by the MediaTek MT6580). Flashing X90L 64-bit MT6739 firmware onto a 32-bit MT6580 device will completely brick the phone.
Download Firmware for DOOGEE X90L
DOOGEE X90L MT6739 PIE9 Stock ROM By Gsm-Flash.com.rar
Official factory Android 9.0 Pie stock firmware for DOOGEE X90L. Contains complete MT6739_Android_scatter.txt partition set. Verified MD5 hash: 57fa7f14e1a5765424ea42f13bb3aff8.
⬇️ Download via AFHDoogee_X90L_MT6739_190322_8.1.zip
Official factory Android 8.1 Oreo firmware release. Useful for restoring original factory launch software or rolling back from Android 9.0.
⬇️ Download via MediaFireFlashing Overview for DOOGEE X90L
- Verify your device model is the DOOGEE X90L (MT6739) by checking the regulatory label
- Install MediaTek USB VCOM drivers on your Windows computer
- Extract your chosen firmware archive to locate MT6739_Android_scatter.txt
- Launch SP Flash Tool as administrator and click Choose on Scatter-loading File
- Select MT6739_Android_scatter.txt from the extracted folder
- Verify Download Only mode is active and click the green Download button
- Power off the phone, hold Volume Down (or connect with no buttons), and plug in the USB cable
- Wait for the green checkmark (Download OK) before disconnecting the phone
Expand preparation checklist for DOOGEE X90L
- Check Settings > About Phone or the sticker under the battery compartment to confirm model 'X90L'.
- Install MediaTek USB VCOM and Preloader drivers on your Windows PC.
- Download and extract SP Flash Tool (v5.1824 or newer recommended for MT6739).
- Ensure the battery is charged to at least 40% before flashing.
- Connect directly to a motherboard USB 2.0 port on your computer using a clean microUSB cable.
- Back up accessible personal files, as flashing formats internal storage.
Compatibility & Bootloader Notes
Flashing stock firmware via SP Flash Tool writes partition images over the MediaTek Preloader/BROM connection. Bootloader unlocking is not required to flash factory scatter packages.
Ready to Flash This Firmware?
Full step-by-step instructions for DOOGEE X90L, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's SP Flash Tool guide.
Frequently Asked Questions
The DOOGEE X90 is a 3G-only model powered by a 32-bit MediaTek MT6580 processor. The DOOGEE X90L is an upgraded 4G LTE model powered by a 64-bit MediaTek MT6739 processor. Their partition layouts, kernel binaries, and modem drivers are completely incompatible. Always confirm you have the X90L before flashing.
Yes. Both packages share the same MT6739 hardware architecture. When upgrading from Android 8.1 to Android 9.0 via SP Flash Tool, select "Firmware Upgrade" or "Download Only" to ensure all updated partition images are cleanly written.
As long as you use "Download Only" or "Firmware Upgrade" mode in SP Flash Tool, the NVRAM and NVDATA partitions will not be touched, keeping your original cellular IMEI numbers and network calibration intact. Never use "Format All + Download".