Crucial Warning: Check your exact board revision (H6123ABC vs H6123D) before flashing. Flashing an H6123D Android 11 build onto an H6123ABC board, or vice versa, results in a display driver failure (black screen) or bootloop. Because the MediaTek MT6761 processor enforces Secure Boot SLA authentication, you must use an MTK BROM Auth Bypass utility before initiating download in SP Flash Tool.
Download Firmware for Tecno Spark Go 2020 / Spark 6 Go (KE5)
KE5-H6123D-RGo-INJO-LC-230405V445(MobiFirmware.com).zip
Newest Android 11 Go firmware build for the H6123D board revision.
⬇️ Download via MediaFireKE5-H6123D-RGo-INJO-LC-221108V429(MobiFirmware.com).zip
Android 11 Go build for H6123D board revision.
⬇️ Download via MediaFireKE5-H6123D-RGo-INJO-LC-220916V425(MobiFirmware.com).zip
Initial maintenance release on the Android 11 Go branch for H6123D hardware.
⬇️ Download via MediaFireKE5-H6123ABC-QGo-GL-220822V553(MobiFirmware.com).zip
Final official Global Android 10 Go firmware release for H6123ABC hardware.
⬇️ Download via MediaFireKE5-H6123ABC-QGo-GL-220616V541(MobiFirmware.com).zip
Global maintenance build for H6123ABC hardware.
⬇️ Download via MediaFireTECNO-SPARK-GO-2020-KE5-H6123ABC-QGo-GL-220413V517.zip
A separate archive of this build from another distributor is also listed below.
⬇️ Download via MediaFireTecno_Spark_Go_KE5_MT6761 220413V517(MobiFirmware.com).zip
Shares build version V517 with the RepairMyMobile release listed above.
⬇️ Download via MediaFireKE5-H6123ABC-QGo-GL-220216V490.rar
Global branch release in RAR archive format.
⬇️ Download via MediaFireTECNO-SPARK-6-GO-KE5-H6123ABC-QGo-GL-211130V453.zip
Labeled Spark 6 Go; identical H6123ABC board architecture.
⬇️ Download via MediaFireKE5-H6123ABC-QGo-GL-211130V453.rar
RAR packaged release of the V453 build.
⬇️ Download via MediaFireTECNO-SPARK-GO-KE5-H6123ABC-QGo-GL-211014V426.zip
Global branch release in ZIP format.
⬇️ Download via MediaFireKE5-H6123ABC-QGo-GL-211014V426.rar
RAR packaged release of the V426 build.
⬇️ Download via MediaFireTecno Spark Go 2020 (KE5-H6123ABC-QGo-GL-210809V373).7z
7z compressed factory image package hosted on Mega.
⬇️ Download via MEGATecno_Spark_Go_2020_KE5_MT6761_V042_210112.zip
Early production build wave from January 2021.
⬇️ Download via MediaFireTecno KE5 Spark Go 2020 (KE5-H6123ABC-QGo-GL-201016V172).7z
Launch-era factory release from October 2020.
⬇️ Download via MEGAFlashing Overview for Tecno Spark Go 2020 / Spark 6 Go (KE5)
- Confirm board revision (H6123ABC vs H6123D) and download the matching package
- Install the MediaTek USB VCOM drivers and libusb-win32 filter driver
- Execute an MTK BROM Auth Bypass utility to disable SLA/DAA security
- Open SP Flash Tool, load MT6761_Android_scatter.txt, and select Download Only
- Connect the powered-off device via USB while holding Volume Down until flashing completes
Expand preparation checklist for Tecno Spark Go 2020 / Spark 6 Go (KE5)
- Confirm your board revision (H6123ABC or H6123D) from the fastboot screen or current build tag under Settings > About phone.
- Install MediaTek USB VCOM drivers and the libusb-win32 filter driver on your PC.
- Run an MTK BROM Auth Bypass utility to disable SLA/DAA before connecting with SP Flash Tool.
- Charge the battery to at least 30% — the 5000mAh battery is non-removable, making recovery from a mid-flash power failure more complex.
- Back up any accessible personal data before proceeding.
Compatibility & Bootloader Notes
Flashing stock firmware through SP Flash Tool in MediaTek BROM mode writes directly to eMMC partitions and does not require an unlocked bootloader. However, the MT6761 platform implements Secure Boot (SLA/DAA), requiring an MTK Auth Bypass tool or a compatible Download Agent (DA) file before SP Flash Tool can establish communication.
Ready to Flash This Firmware?
Full step-by-step instructions for Tecno Spark Go 2020 / Spark 6 Go (KE5), including prerequisites, error fixes, and screenshots, are on FlashGuideHub's SP Flash Tool guide.
Can also be flashed via MTK Auth Bypass: Open MTK Auth Bypass Guide →
Frequently Asked Questions
Check the build number string in Settings > About phone or on the recovery screen. Build tags beginning with KE5-H6123ABC correspond to Global Android 10 Go units, while tags beginning with KE5-H6123D indicate India/South Asia Android 11 Go units. Flashing across these revisions results in screen driver failure.
The MediaTek MT6761 SoC implements Secure Boot SLA/DAA authentication. You must run an MTK Auth Bypass tool (or mtkclient) to disable hardware authentication in BROM mode before SP Flash Tool can flash the device.
Yes, both commercial names share the KE5 model family and MT6761 platform. Hardware compatibility is governed by the motherboard revision tag (H6123ABC vs H6123D), not the retail box name.
No. H6123D packages contain kernel drivers and a preloader specific to the D-revision hardware. Flashing H6123D firmware onto an H6123ABC unit will render the display and touch panel non-functional.