Crucial Warning: Always flash using "Download Only" mode in SP Flash Tool. NEVER select "Format All + Download", as this will erase the protected NVRAM and NVDATA partitions, wiping your device's unique IMEI numbers and baseband calibration data. Ensure you select the EEA package for European models to preserve regional network compliance.
Download Firmware for Ulefone Note 8P
GQ3091EF1_TE637_Ulefone_EEA_20220427_V27(EU).rar
Official European Economic Area (EEA) stock firmware release for EU/UK units. Includes Google Go apps and European regulatory compliance.
⬇️ Download via Google DriveGQ3091EF1_TE637_Ulefone_20220427_V2_Non-EU.rar
Official Global / Non-EU stock firmware release for international variants outside the European Union.
⬇️ Download via Google DriveFlashing Overview for Ulefone Note 8P
- Install MediaTek USB VCOM and Preloader drivers on your Windows PC.
- Extract the firmware archive and load MT6737_Android_scatter.txt into SP Flash Tool.
- Ensure the flashing mode is set to "Download Only" and click the Download button.
- Power off the Ulefone Note 8P completely and connect it to the PC via microUSB cable.
- Wait for the green checkmark circle to appear, then disconnect the cable and power on.
Expand preparation checklist for Ulefone Note 8P
- Confirm the device hardware code is GQ3091EF1 by checking the label underneath the removable back cover or in Settings > About Phone.
- Ensure the 2700mAh internal battery is charged to at least 40% before flashing.
- Install official 64-bit MediaTek USB VCOM and Preloader drivers on a Windows computer.
- Extract the .rar package using WinRAR or 7-Zip to a short directory path (such as C:note8p_fw) with no spaces.
- Load MT6737_Android_scatter.txt into SP Flash Tool and verify that 'Download Only' is active.
- Connect the phone powered off using an authentic microUSB cable directly to a rear USB 2.0 motherboard port.
Compatibility & Bootloader Notes
Flashing official stock firmware via SP Flash Tool writes signed partition images directly over MediaTek BROM and Preloader interfaces. It restores factory software without requiring an unlocked bootloader.
Ready to Flash This Firmware?
Full step-by-step instructions for Ulefone Note 8P, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's SP Flash Tool guide.
Can also be flashed via MTKClient: Open MTKClient Guide →
Frequently Asked Questions
The MediaTek MT6737 utilizes four energy-efficient ARM Cortex-A53 cores running at 1.3 GHz on a 28nm planar process. Because the SoC addresses 2 GB of LPDDR3 RAM, Android 10 (Go edition) implements a modified low-RAM runtime configuration. This limits background daemon footprint, utilizes zRAM compressed swap caching, and deploys lightweight Google Go binaries (Search Go, Assistant Go, Maps Go), enabling smooth operation and avoiding severe thermal saturation.
Both packages share the same core MediaTek MT6737 kernel and Android 10 Go base, but differ in carrier regionalization and regulatory defaults. The EEA (V27) build incorporates European telecommunications compliance parameters (SAR limits, EU roaming protocols, emergency broadcast profiles), GDPR privacy compliance defaults, and EU-specific search engine selection prompts, whereas the Non-EU (V2) build uses unconstrained global market defaults.
The scatter file identifies the hardware platform as MT6737 with project code GQ3091EF1 and board revision TE637. It allocates standard eMMC 5.0 memory offsets for preloader, boot, recovery, system, vendor, and userdata. It also defines protected non-volatile blocks (nvram at linear base offset 0x380000 and nvdata at 0x2700000) that house factory radio calibration, Wi-Fi MAC addresses, and cellular IMEI identifiers.
The Note 8P uses an atypical 19.5:9 sub-qHD aspect ratio with 442x960 pixels. The display initialization timing and LCD driver IC parameters are compiled directly into the lk (Little Kernel) and kernel device tree blobs within boot.img. Flashing incorrect board revisions can cause display desynchronization, resulting in a black backlit screen or vertical line artifacts if the LCD controller timing does not match.