Crucial Warning: Flashing via flash_all.bat formats internal UFS 4.1 storage, erasing all user documents, local media, and cryptographic tokens. Always create an off-device backup prior to flashing. Never execute "clean all and lock" (flash_all_lock.bat) when installing modified or non-matching regional firmware, as bootloader verification against the hardware Root-of-Trust will trigger an immediate permanent bootloader lock brick.
Download Firmware for Xiaomi 15S Pro
dijun-images-OS3.0.304.0.WODCNXM-user-20260921.0000.00-16.0-cn-8f9d5e3a8c.tgz
Official factory China Fastboot TGZ release based on Android 16.0 with HyperOS 3.0. Contains complete raw images for the 3nm Xiaomi Xring O1 platform and Leica camera tuning.
MD5: 8f9d5e3a8cde9908b0bc361f8cca4a6b
Flashing Overview for Xiaomi 15S Pro
- Unlock the bootloader using the official Xiaomi Mi Unlock utility.
- Extract the .tgz archive twice using 7-Zip until flash_all.bat and the images folder appear.
- Power off the phone and hold Volume Down + Power together until the orange FASTBOOT screen displays.
- Open Mi Flash Tool, select the extracted firmware root directory, and choose "clean all".
- Click "Flash" and keep the phone connected while sparse partitions stream into UFS 4.1 storage.
Expand preparation checklist for Xiaomi 15S Pro
- Verify your device codename is 'dijun' by executing 'fastboot getvar product' from a command line while in Fastboot mode.
- Unlock the bootloader using the official Xiaomi Mi Unlock utility before attempting Fastboot flashing.
- Install official Xiaomi USB drivers and updated Android SDK Platform Tools (v35+) on a 64-bit Windows PC.
- Confirm that the 6100 mAh Silicon-Carbon battery holds at least 50% charge before beginning the flashing process to prevent unexpected shutdowns during sparse chunk writes.
- Extract the .tgz archive using 7-Zip twice until flash_all.bat and the images directory appear in the root path.
- Connect the device via a certified USB Type-C 3.2 data cable directly to a rear motherboard USB port to prevent communication drops.
Compatibility & Bootloader Notes
Official Fastboot flashing requires an officially unlocked bootloader via the Xiaomi Mi Unlock utility. The Xiaomi Xring O1 platform integrates an in-house Hardware Security Module enforcing signed cryptographic tokens for low-level recovery.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi 15S Pro, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via Fastboot: Open Fastboot Guide →
Frequently Asked Questions
The Xiaomi Xring O1 (Xuanjie O1) processor is fabricated on TSMC's 3nm N3E process node, implementing a deca-core CPU layout across four compute clusters: two Cortex-X925 prime cores clocked up to 3.9 GHz, four Cortex-A725 performance cores at 3.4 GHz, two Cortex-A725 mid cores at 1.9 GHz, and two Cortex-A520 efficiency cores at 1.8 GHz, paired with an ARM Immortalis-G925 MC16 GPU. Paired with LPDDR5X-8533 memory and a dual-lane UFS 4.1 storage controller delivering sequential write throughput exceeding 3500 MB/s, this platform enables rapid unzipping and flashing of multi-gigabyte sparse partition chunks without transport buffer underruns.
The Xiaomi 15S Pro implements Android Virtual A/B with dynamic partition grouping. Sub-partitions (system, system_ext, vendor, product, odm, vendor_dlkm) are grouped inside a single 9GB+ physical dynamic super container (super.img). During Fastboot flashing, the flash_all.bat script commands the handset to transition automatically into userspace fastbootd mode to map dynamic partitions directly. This architecture eliminates rigid partition size limits while supporting atomic background software updates.
Unlike optical scanners that capture 2D surface images via screen illumination, the Xiaomi 15S Pro utilizes a high-frequency 3D ultrasonic sensor that maps acoustic skin impedance. Ultrasonic transducer delay tables, acoustic bias calibrations, and Leica Summilux lens optical distortion matrices are stored inside protected non-volatile sectors within the persist partition (/persist/data/fingerprint/ and /persist/camera/). Flashing official Fastboot firmware with flash_all.bat deliberately protects /persist to preserve hardware biometric and camera calibrations.
The in-house Xring O1 silicon incorporates an integrated Hardware Security Module (HSM) and primary bootloader enforcing Xiaomi-signed cryptographic tokens. If the phone is forced into low-level download mode via hardware test points, flashing tools must pass a signed public key challenge validated by Xiaomi's corporate authorization servers before sending write commands to memory. Fastboot mode remains the designated, authorized open recovery pathway once the bootloader is unlocked.