Crucial Warning: Flashing via flash_all.bat reformats internal UFS 4.1 flash storage, erasing all user documents, local media, and cryptographic security tokens. Packages carrying the XPB or WPB codename identifier belong strictly to the popsicle hardware platform and must never be flashed onto standard Xiaomi 17 (pudding) or Xiaomi 17 Pro (pandora) hardware, as differing display bridges and camera ISP controllers will lead to a hard brick. When using Mi Flash Tool on imported hardware, NEVER select "clean all and lock" (flash_all_lock.bat) to prevent locking the bootloader against mismatched regional root-of-trust certificates.
Download Firmware for Xiaomi 17 Pro Max
Official Xiaomi HyperOS Factory Firmware (China Stable) 2 packages
popsicle_images_OS4.0.5.0.XPBCNXM_20261021.0000.00_17.0_cn_087454683a.tgz
Official factory China Fastboot firmware package on Android 17.0 base with HyperOS 4.0. Contains complete partition binaries for clean restoration and unbricking.
MD5: 087454683a7b22513a289e59706c415e
popsicle-ota_full-OS4.0.5.0.XPBCNXM-user-17.0-03fc15795d.zip
Official factory China Recovery OTA update package for stock recovery installation or local on-device update.
MD5: 03fc15795df2b35b1954d09806208495
Xiaomi.eu Multilingual Custom ROM (Stable) 1 package
xiaomi.eu_POPSICLE_OS3.0.319.0.WPBCNXM_16_fe7c7b167f.zip
Community-developed Xiaomi.eu stable hybrid package. Features pre-integrated Google Mobile Services, multilingual translation, and removes China regional services.
MD5: fe7c7b167f2d864a207cc644791db088
Custom Recoveries (TWRP) 1 package
twrp-3.7.1_16-popsicle-YuKongA.img
Official TWRP custom recovery compiled by YuKongA for popsicle. Supports Android 16/17 FBEv2 userdata decryption, dynamic partition management, and sideload flashing.
MD5: ccd9b3a7b8521b7b1e9b923df14b013d
Flashing Overview for Xiaomi 17 Pro Max
- Unlock bootloader with Mi Unlock
- Extract Fastboot TGZ archive twice
- Boot into Fastboot mode
- Configure Mi Flash Tool with "clean all"
- Flash firmware and wait for initial reboot
Expand preparation checklist for Xiaomi 17 Pro Max
- Verify your phone codename is 'popsicle' by executing 'fastboot getvar product' from a command prompt while connected in Fastboot mode.
- Unlock the bootloader using the official Xiaomi Mi Unlock tool before attempting Fastboot partition flashing.
- Install official Qualcomm USB drivers and updated Android SDK Platform Tools (v35+) on a 64-bit Windows PC.
- Ensure the 7500 mAh battery holds at least 50% charge before beginning the flashing process to prevent unexpected shutdowns during 12.5GB dynamic super partition streaming.
- Extract the .tgz archive twice using 7-Zip until flash_all.bat and the images directory appear in the root path.
- Connect the phone using a certified USB Type-C 3.2 data cable directly to a rear PC motherboard USB port to avoid communication drops.
Compatibility & Bootloader Notes
Official Fastboot flashing requires an officially unlocked bootloader via the Xiaomi Mi Unlock utility. Qualcomm SM8850 Emergency Download (EDL 9008) mode enforces cryptographic challenge-response authentication requiring authorized Xiaomi service center credentials.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi 17 Pro Max, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via Fastboot: Open Fastboot Guide →
Frequently Asked Questions
The Xiaomi 17 Pro Max integrates two independent LTPO AMOLED panels on a unified chassis: a 6.9-inch 1.5K primary front display and a 2.9-inch secondary rear display located adjacent to the Leica camera housing. The motherboard uses dual MIPI DSI display lanes managed by Qualcomm's Adreno 840 display processing unit. Flashing firmware built for single-screen devices like the standard Xiaomi 17 (pudding) fails to initialize the secondary display bridge, leaving the rear screen completely unpowered.
The popsicle platform pairs Qualcomm's 3nm SM8850-AC chipset with a quad-channel LPDDR5X memory controller operating up to 9600 Mbps and high-speed UFS 4.1 flash storage. Storage write operations during Fastboot flashing stream raw dynamic partition images across high-bandwidth UFS lanes, allowing a 12.5 GB factory image to flash in under four minutes provided USB 3.2 data lines are maintained.
Modern HyperOS on Android 17.0 utilizes Google's Virtual A/B partition structure with dynamic partitions. The multi-gigabyte super.img archive houses system, system_ext, product, vendor, and mi_ext logical partitions, alongside high-resolution graphical assets for both the front and rear displays. When unpacked from the .tgz container, the uncompressed partition images expand to over 24 GB on the host computer.
Official factory releases (such as OS4.0.5.0.XPBCNXM) provide stock recovery OTA zip files verified against Xiaomi's private cryptographic keys and fastboot TGZ packages containing raw flash binaries. In contrast, Xiaomi.eu builds are distributed as hybrid zip archives containing both batch fastboot installation scripts for PC execution and payload structures compatible with custom recoveries like TWRP, with Chinese system applications replaced by Google Mobile Services.