Crucial Warning: Acoustic Subsystem & Virtual A/B Architecture: The Mi 10S (thyme) integrates dual symmetrical 1216 linear speakers tuned by Harman Kardon (0.7mm amplitude, 1.2cc sound cavity) and utilizes Google Virtual A/B dynamic partitions where recovery lives directly in the boot partition ramdisk. Never flash firmware packages built for earlier Snapdragon 865 sibling models like the Mi 10 (umi) or Mi 10 Pro (cmi), as doing so breaks audio DSP routing, touch digitizer drivers, and camera sensor initialization.
Official Xiaomi Mi 10S Stock Firmware Downloads
Official Stock Fastboot & Recovery Firmware (China) 4 packages
thyme_images_OS1.0.4.0.TGACNXM_20240605.0000.00_13.0_cn_778cda4301.tgz
Final official factory Fastboot TGZ package for unbricking and restoring stock HyperOS 1.0. Always select clean all (flash_all.bat).
MD5: 778cda43017aacde0d7a04ff85b872f8
miui_THYME_OS1.0.4.0.TGACNXM_80dbab1cd4_13.0.zip
Final official stock Recovery update package for HyperOS 1.0. Flash via official recovery menu or local update on unmodified devices.
MD5: 80dbab1cd4930b8874b1123beea56049
thyme_images_V14.0.6.0.TGACNXM_20230904.0000.00_13.0_cn_c97bf99cf1.tgz
Final official MIUI 14 factory Fastboot image for restoring pre-HyperOS software.
MD5: c97bf99cf1d342cc6a308218dfc734d3
miui_THYME_V14.0.6.0.TGACNXM_a3c1d41b17_13.0.zip
Official stock Recovery update package for MIUI 14 final release.
MD5: a3c1d41b17d3829acd79a39f3818002c
Community Multilingual Custom ROMs (Xiaomi.eu) 1 package
xiaomi.eu_THYME_OS1.0.4.0.TGACNXM_13.zip
Community multilingual custom ROM with integrated Google Play Services, European translations, and debloated China apps. Requires unlocked bootloader and TWRP.
MD5: cdc1d908fde541a54a03dd9910f85f69
Custom Recovery Images & Toolkits (TWRP by skkk) 1 package
twrp-3.7.1_12-v9.0_A15-thyme-skkk.img
Unofficial TWRP recovery image compiled by skkk with FBEv2 decryption support for Android 13 HyperOS and Android 14/15 custom ROMs. Boot temporarily via fastboot boot.
⬇️ Download via Direct Link5-Step Fastboot & Mi Flash Walkthrough for thyme
- Download and decompress thyme_images_OS1.0.4.0.TGACNXM_20240605.0000.00_13.0_cn_778cda4301.tgz twice using 7-Zip to C:\thyme_fw
- Power off the phone completely, then hold Volume Down and Power buttons together until the orange FASTBOOT graphic displays
- Connect via USB 2.0 cable and verify terminal communication using the command "fastboot devices"
- Open Xiaomi Mi Flash Tool, select the extracted firmware directory, and strictly verify "clean all" is checked at the bottom right
- Click Flash to write partition images to UFS 3.0 storage and allow 5 to 8 minutes for the initial HyperOS cache initialization
Pre-Flash Hardware Checks, Anti-Rollback & Board Verification
- 1. Verify your model code in Settings > About Phone or on the rear casing (M2102J2SC).
- 2. Decompress your target Fastboot archive (such as thyme_images_OS1.0.4.0.TGACNXM_20240605.0000.00_13.0_cn_778cda4301.tgz) twice using 7-Zip directly into a short root path such as C:thyme_fw without spaces in directory names.
- 3. Check your anti-rollback protection index before downgrading by connecting the phone in Fastboot mode and running the terminal command "fastboot getvar anti".
- 4. Ensure the 4780 mAh battery retains at least 50% charge before flashing to avoid power loss while writing large dynamic super partition images.
- 5. In severe unbrick scenarios where the bootloader cannot reach Fastboot mode, hardware EDL test points are located on the mainboard beneath the rear camera module and graphite heat dissipation film.
- 6. Connect the phone directly to a native motherboard USB 2.0 port with an authentic data sync cable to prevent packet loss during the 6GB+ flashing process.
Snapdragon 870 Board Architecture & Dual Speaker Tuning
Flashing Fastboot packages or custom recoveries requires an officially unlocked bootloader via the Xiaomi Mi Unlock utility. Because the Mi 10S was manufactured exclusively under model code M2102J2SC for Mainland China, never lock the bootloader using flash_all_lock.bat when running custom multilingual software such as Xiaomi.eu, as mismatched security signatures trigger an immediate hard brick.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi Mi 10S, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via Fastboot: Open Fastboot Guide →
Technical Questions & Archival Notes for the thyme Firmware Tree
While the original Mi 10 (umi) and Mi 10 Pro (cmi) launched on Android 10 with a non-A/B System-as-Root partition scheme and a dedicated physical recovery partition, the Mi 10S (thyme) launched on Android 11 utilizing Google's Virtual A/B dual-slot architecture. The Mi 10S does not possess a standalone physical /recovery partition. Instead, the recovery ramdisk resides directly inside boot_a and boot_b, and sub-partitions (system, vendor, product, odm, system_ext) are managed dynamically inside a single unified super container.
The Xiaomi Mi 10S was manufactured and distributed exclusively for the Mainland China domestic market under model number M2102J2SC with the CNXM regional firmware tag. Because Xiaomi never launched the device in international retail channels, no official Global, European (EEA), or Indian firmware was ever compiled. International owners rely on the Xiaomi.eu community project, which translates official Chinese HyperOS and MIUI releases, incorporates Google Mobile Services, and strips regional bloatware.
The Mi 10S upgrades the processor to the Qualcomm Snapdragon 870 5G (SM8250-AC clocked up to 3.2 GHz vs 2.84 GHz on Snapdragon 865) and introduces dual symmetrical 1216 linear speakers tuned by Harman Kardon with a 1.2cc equivalent sound cavity. Furthermore, the Mi 10S adopts a redesigned rear camera bump styling reminiscent of the Mi 10 Ultra while retaining the 108 MP primary sensor. Flashing firmware between these models results in broken audio drivers and unbootable partitions.
The bootloader on the Mi 10S enforces hardware anti-rollback protection fuses. When planning to downgrade from HyperOS 1.0 (OS1.0.4.0.TGACNXM) to MIUI 14 (V14.0.6.0.TGACNXM), put the device in Fastboot mode and check your current index by running "fastboot getvar anti". Flashing an older package with a lower anti-rollback value than the device hardware fuse triggers an unrecoverable hard brick, whereas packages with matching ARB values flash safely.