Crucial Warning: Confirm your device identifier is 'sirius' (M1805E2A) before flashing. Never cross-flash firmware from the flagship Xiaomi Mi 8 ('dipper', Snapdragon 845), Mi 8 Pro ('equuleus'), or Mi 9 SE ('grus') onto sirius. Because no Global MIUI ROM exists for this hardware, locking the bootloader on Xiaomi.eu builds will halt boot and require authorized Qualcomm EDL 9008 recovery.
Xiaomi Mi 8 SE (sirius) Stock ROM, Xiaomi.eu & Recovery Downloads
Official Stock China (CN) Stable — MIUI 12.5 (Android 10) 2 packages
sirius_images_V12.5.1.0.QEBCNXM_20210625.0000.00_10.0_cn_0969fb8c9f.tgz
Final official factory Fastboot archive (2,882,401,539 bytes). Recommended base before installing custom recoveries or Xiaomi.eu from older Oreo/Pie releases.
MD5: 0969fb8c9fc8686034fd9fae5dfd625a
miui_MI8SE_V12.5.1.0.QEBCNXM_d9815dfb66_10.0.zip
Official stock Recovery update ZIP (2,139,621,992 bytes).
⬇️ Download via MIUI OTAXiaomi.eu Multilingual Custom ROM (MIUI 12.5) 1 package
xiaomi.eu_multi_MI8SE_V12.5.1.0.QEBCNXM_v12-10.zip
Multilingual de-bloated build based on CN V12.5.1.0.QEBCNXM with Google Play Services (2,723,213,209 bytes; SHA-1: e40ebc3deddbddb82a9a4d95a6939a2c4c461edf).
MD5: d8e6da5632cf534d4719b52f153bd962
Custom Recoveries (PBRP & TWRP — No Official OrangeFox) 2 packages
PBRP-sirius-3.1.0-20210713-0726-OFFICIAL.zip
Official PitchBlack Recovery Project ZIP (59,730,188 bytes; SHA-1: b5c55d217e294c5121fc3096ef0e787c4f796e85).
MD5: 2a7e048ca1a136034cbc4f263cf43bb1
twrp-3.7.0_9-0-sirius-TeamWin.img
Standalone recovery image for Fastboot flashing or temporary boot (36,564,992 bytes; SHA-1: 68851f02f8c0aaed461e877bc8d98c46b02b3861).
MD5: 126b69aac1b64fd0e301955c2b1d48a1
MIUI 12.5 Restoration & Recovery Overview for sirius
- Confirm model M1805E2A (codename sirius) and an unlocked bootloader before modifying partitions
- Download the matching Fastboot .tgz, Xiaomi.eu .zip, or recovery package and verify its MD5/SHA-1 hash
- Extract Fastboot .tgz archives twice with 7-Zip into a short folder path such as C:\sirius\
- Use Mi Flash Tool ("clean all" only) or Fastboot/TWRP following the full walkthrough on FlashGuideHub
- Allow 8 to 12 minutes on first boot while Android 10 MIUI 12.5 initializes eMMC storage
Hardware Verification, eMMC 5.1 Storage & Bootloader Checks
- Check your back glass engraving or fastboot getvar product output to verify model M1805E2A and codename 'sirius' rather than Mi 8 ('dipper') or Mi 9 SE ('grus').
- Note that sirius uses eMMC 5.1 internal flash (64 GB or 128 GB) with an A-only Treble layout and no microSD card slot, so large ROM zips like xiaomi.eu_multi_MI8SE_V12.5.1.0.QEBCNXM_v12-10.zip (2.54 GB) must be copied via MTP, ADB sideload, or a USB-C OTG drive.
- Verify your current Android base before flashing recovery zips: V12.5.1.0.QEBCNXM targets Android 10 firmware; upgrading straight from Android 8.1 or 9 should start with sirius_images_V12.5.1.0.QEBCNXM_20210625.0000.00_10.0_cn_0969fb8c9f.tgz via Fastboot.
- Charge the 3,120 mAh battery above 40% via USB Type-C and inspect the port for lint before starting a 2.68 GB Fastboot write.
- Verify MD5 or SHA-1 checksums on SourceForge and Bigota downloads—if an unlocked sirius becomes soft-bricked with no Fastboot access, rear motherboard SDM710 EDL test points sit near the battery connector.
M1805E2A vs Mi 8 (dipper) & Mi 9 SE (grus) Notes
Bootloader unlock via official Mi Unlock is required before flashing Xiaomi.eu, PBRP, TWRP, or Fastboot images. Because Xiaomi Mi 8 SE (M1805E2A) is a China-only model with no Global stock firmware, never lock the bootloader while running Xiaomi.eu or modified software.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi Mi 8 SE, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via TWRP Install: Open TWRP Install Guide →
Xiaomi Mi 8 SE Architecture, Build Codes & Recovery FAQ
Xiaomi released the M1805E2A Mi 8 SE strictly for Mainland China and never issued an official Global (MI) or European (EEA) MIUI branch. In V12.5.1.0.QEBCNXM, the leading Q marks Android 10, EB identifies the sirius motherboard, CN stands for China distribution, and XM denotes the standard unlocked retail build.
Although they share similar 2018–2019 styling, the Mi 8 SE (sirius) runs on a 10nm Snapdragon 710 with eMMC 5.1 flash, a 5.88-inch Super AMOLED display, and a rear capacitive fingerprint reader. By contrast, the Mi 8 (dipper) uses a Snapdragon 845 with faster UFS 2.1 storage and IR face hardware, while the Mi 9 SE (grus) uses a Snapdragon 712 with an optical under-display fingerprint sensor and NFC.
PBRP-sirius-3.1.0-20210713-0726-OFFICIAL.zip (56.96 MB) is an official PitchBlack Recovery Project installer archive designed to be flashed inside an existing custom recovery, whereas twrp-3.7.0_9-0-sirius-TeamWin.img (34.87 MB) is a standalone recovery partition image built on the TeamWin 9-0 tree for direct Fastboot writing. OrangeFox Recovery Project does not maintain an official release channel for sirius.
Xiaomi.eu builds its 2.54 GB multilingual package directly on top of Xiaomi's final China Stable V12.5.1.0.QEBCNXM Android 10 codebase, stripping domestic Chinese services and adding European language packs plus Google Play Services so international owners have a clean daily system.