Crucial Warning: Do not cross-flash Xiaomi Mi A3 (laurel_sprout) firmware onto the Mi CC9e (laurus). The Mi A3 uses dual A/B partitions without a recovery block, whereas the Mi CC9e uses an A-only partition scheme with a dedicated recovery block. Flashing laurel_sprout firmware directly will break partition tables and brick the device.
Xiaomi Mi CC9e (laurus) Official Fastboot, Recovery & TWRP Packages
China Stable — Final Official MIUI 12.5 (V12.5.5.0.QFMCNXM) 2 packages
laurus_images_V12.5.5.0.QFMCNXM_20211122.0000.00_10.0_cn_fc0291dab7.tgz
Final official China Stable Fastboot factory package for laurus with complete partition table
MD5: fc0291dab7c363fa4e4e7b7286b67cda
miui_LAURUS_V12.5.5.0.QFMCNXM_eb006da5b1_10.0.zip
Official China Stable Recovery package flashable via stock Mi recovery or local updater
MD5: eb006da5b1079df2d69d6a09c950cc14
Xiaomi.eu Community Stable — Multilingual MIUI 12.5 1 package
xiaomi.eu_multi_MICC9e_V12.5.5.0.QFMCNXM_v12-10.zip
Community custom ROM with Google apps and multi-language support; requires unlocked bootloader and format data in TWRP
MD5: 84e27f18b5c9241b71ad0e8bbef80d8f
Custom Recovery Implementations (Fastboot) 1 package
TWRP-3.3.2B-0620-XIAOMI_CC9E_10.0-CN-wzsx150-fastboot.zip
Unofficial custom recovery by LR.Team (wzsx150) supporting System-as-Root, userdata decryption, and fastboot installer script
MD5: a95ef32bc972e2db4016e788bc53f7f1
Xiaomi Mi CC9e Fastboot Restoration Steps & Overview
- Confirm model M1906F9SC (laurus) and check anti-rollback index via fastboot getvar anti
- Download official China MIUI 12.5 V12.5.5.0.QFMCNXM Fastboot TGZ or Recovery ZIP
- Extract the .tgz archive twice with 7-Zip until flash_all.bat sits in the outer directory
- Boot device into Fastboot mode by holding Volume Down and Power, then connect via USB 2.0
- Flash clean stock software with Mi Flash Tool using clean all, or install LR.Team TWRP
Pre-Flash Hardware Checks & Driver Setup for Mi CC9e
- Verify that fastboot getvar product returns laurus (M1906F9SC) before initiating any flashing procedure.
- Check the anti-rollback index with fastboot getvar anti to verify hardware rollback limits before attempting any software downgrade.
- Verify that your unit uses the A-only partition layout and has not been repartitioned with modified Mi A3 partition tables.
- Ensure the 4030 mAh battery maintains at least 50% charge to ensure steady power while writing to 64GB or 128GB UFS 2.1 storage.
- Confirm file integrity by verifying MD5 checksum fc0291dab7c363fa4e4e7b7286b67cda for laurus_images_V12.5.5.0.QFMCNXM_20211122.0000.00_10.0_cn_fc0291dab7.tgz.
- Use a rear USB 2.0 motherboard port to prevent communication drops during large image write operations.
Snapdragon 665 Platform & A-Only Partition Taxonomy
Official bootloader unlocking via Mi Unlock Tool is required before flashing Fastboot packages or custom recoveries. Do not lock bootloader on non-stock firmware.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi Mi CC9e, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via TWRP Install: Open TWRP Install Guide →
Mi CC9e (laurus) Hardware & Archival FAQ
Although both phones share Qualcomm Snapdragon 665 silicon, Xiaomi designed the Mi CC9e for the Chinese domestic market running MIUI with a traditional A-only System-as-Root (SAR) partition scheme containing a dedicated physical recovery block. In contrast, the Mi A3 was released under Google’s Android One initiative, which mandates seamless background operating system updates using a dual A/B slot partition layout where the recovery ramdisk resides inside boot.img rather than a standalone partition.
No. Attempting to run standard Mi A3 Fastboot installation scripts on the Mi CC9e will fail because the partition tables are fundamentally mismatched. The Mi A3 firmware searches for dual-slot partition targets (such as boot_a, boot_b, system_a, system_b) that do not exist on the stock Mi CC9e partition table. Forcing these files can corrupt the partition table and hard-brick the device.
Xiaomi officially retired the Mi CC9e at the conclusion of its scheduled software maintenance window. Build V12.5.5.0.QFMCNXM represents the final stable update released for the device. Because the domestic Chinese product lineup transitioned to newer series, the Mi CC9e never received official updates to Android 11, MIUI 13, or Xiaomi HyperOS.