Crucial Warning: This firmware is strictly for the Xiaomi MIX Fold 2 (zizhan / 22061218C). Do not flash these packages onto other foldable models such as the original Mi MIX Fold (cetus), MIX Fold 3 (babylon), or MIX Flip (ruyi), as differing dual-display driver pipelines and partition maps will cause an immediate hard brick. When using Mi Flash Tool on imported hardware, always select "clean all" (flash_all.bat) and avoid "clean all and lock" (flash_all_lock.bat) to prevent locking the bootloader with modified regional software.
Download Official Xiaomi MIX Fold 2 Stock Firmware ROM
China Stable (HyperOS 3.0) 2 packages
zizhan_images_OS3.0.9.0.VLRCNXM_20260805.0000.00_15.0_cn_2130e98a9c.tgz
Official China mainland factory Fastboot package for model 22061218C. Features updated Android 15 HyperOS 3.0 base, Leica camera calibration, and dual-display LTPO2 drivers.
MD5: 2130e98a9c18d98ae362d7ded83024ef
zizhan-ota_full-OS3.0.9.0.VLRCNXM-user-15.0-30ba6b19a5.zip
Official China mainland Recovery OTA package for model 22061218C. Installable via stock recovery or system updater menu.
MD5: 30ba6b19a500099b85d1c88a3022c7d3
China Stable (HyperOS 2.0) 2 packages
zizhan_images_OS2.0.208.0.VLRCNXM_20251126.0000.00_15.0_cn_32bbbd7eec.tgz
Official China mainland factory Fastboot package for model 22061218C running stable HyperOS 2.0 on Android 15.
MD5: 32bbbd7eec6307b6b26fa6f768d20f68
zizhan-ota_full-OS2.0.208.0.VLRCNXM-user-15.0-8f6aeb9710.zip
Official China mainland Recovery OTA package for model 22061218C running HyperOS 2.0 on Android 15.
MD5: 8f6aeb97103ccf090b715ed957b81982
China Stable (HyperOS 1.0) 2 packages
zizhan_images_OS1.0.15.0.ULRCNXM_20250114.0000.00_14.0_cn_e4bf2a9a7c.tgz
Official China mainland factory Fastboot package for model 22061218C running stable HyperOS 1.0 on Android 14.
MD5: e4bf2a9a7cdee052cfe132b33f9396b6
miui_ZIZHAN_OS1.0.15.0.ULRCNXM_868bd4a6f8_14.0.zip
Official China mainland Recovery OTA package for model 22061218C running HyperOS 1.0 on Android 14.
MD5: 868bd4a6f8e6f6ed1e3a078e8fe7b43b
5-Step Xiaomi MIX Fold 2 Fastboot Flashing Overview
- Unlock the device bootloader using the official Xiaomi Mi Unlock tool linked to an approved Mi Account.
- Extract the downloaded .tgz Fastboot archive twice with 7-Zip until flash_all.bat and the images folder appear.
- Turn off the phone completely, then hold Volume Down and Power together until FASTBOOT displays on the outer screen.
- Launch Mi Flash Tool, select the extracted folder, and verify that "clean all" is selected in the bottom right.
- Click "Flash" and keep the USB cable connected until the status column reports success and the device restarts.
Essential Hardware Checks & Setup Before Flashing
- Verify the hardware codename is "zizhan" and model is "22061218C" by running "fastboot getvar product" in Fastboot mode.
- Check the anti-rollback index by executing "fastboot getvar anti" to prevent flashing an incompatible older bootloader version.
- Inspect UFS 3.1 flash storage health and ensure partitions are not in a hardware read-only state if recovering from sudden reboots.
- Ensure the internal 4500 mAh dual-cell battery holds at least 50% charge to maintain uninterrupted power during dynamic super partition writes.
- Connect the handset directly to a native USB 2.0 port on the computer motherboard using a verified USB Type-C data cable.
- Decompress the downloaded Fastboot archive zizhan_images_OS3.0.9.0.VLRCNXM_20260805.0000.00_15.0_cn_2130e98a9c.tgz twice using 7-Zip directly to a short root directory such as C:zizhan_fw to avoid Windows path length limitations.
Xiaomi MIX Fold Lineage & Hardware Compatibility
Official Fastboot flashing requires an unlocked bootloader through the official Xiaomi Community unlocking authorization. Always select "clean all" (flash_all.bat) when flashing imported hardware.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi MIX Fold 2, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via Fastboot: Open Fastboot Guide →
Hardware Architecture & Firmware Archive FAQ
The Qualcomm Snapdragon 8+ Gen 1 (SM8475) incorporates an Adreno Display Processor paired with dual MIPI DSI physical controllers. In the MIX Fold 2 hardware layout, the inner 8.02-inch 120Hz Eco2 OLED panel features an uninterrupted, hole-free design because the selfie camera is placed exclusively on the 6.56-inch outer cover screen. Integrated magnetic Hall-effect sensors embedded along the micro waterdrop hinge detect physical opening angles, signaling the kernel display driver to hand off active framebuffers between panels with zero frame tearing.
HyperOS packages for model 22061218C utilize a consolidated dynamic "super" partition container mapped over high-speed UFS 3.1 storage. System-as-Root (SAR) architecture houses logical partitions including system, system_ext, product, vendor, and odm, formatted in read-only EROFS. During flashing via flash_all.bat, execution hands off to userspace fastbootd mode, dynamically sizing logical blocks to accommodate updated Android 15 system files without repartitioning physical flash storage.
Although they belong to Xiaomi's foldable family, each model is built on an entirely distinct silicon platform. The MIX Fold 2 (zizhan) uses the Snapdragon 8+ Gen 1 (SM8475), whereas the MIX Fold 3 (babylon) runs on the Snapdragon 8 Gen 2 Leading Version (SM8550-AC), and the MIX Flip (ruyi) is powered by the Snapdragon 8 Gen 3 (SM8650). Device tree blobs (dtb), TrustZone security components, dual Goodix digitizer drivers, and camera ISP binaries are hardware-locked; cross-flashing between these models will corrupt partition layouts and cause an unrecoverable hard brick.
Android Verified Boot 2.0 checks cryptographic RSA signatures embedded within the vbmeta partition against hardware root-of-trust public keys burned into the Qualcomm processor's one-time programmable eFuses. When flashing stock firmware through flash_all.bat, each partition payload is validated before booting. If a modified boot image or mismatched partition table is flashed while attempting to lock the bootloader via flash_all_lock.bat, AVB validation fails, halting startup with the error "The system is destroyed".