Crucial Warning: This package is strictly for the Xiaomi MIX Fold 3 (babylon / 2308CPXD0C). Do not flash this firmware onto other foldable models such as the Xiaomi MIX Fold 4 (goku) or clamshell MIX Flip (ruyi), as distinct dual-display driver pipelines and partition maps will cause a severe brick. When using Mi Flash Tool on imported hardware, always select "clean all" (flash_all.bat) and avoid "clean all and lock" (flash_all_lock.bat).
Download Firmware for Xiaomi MIX Fold 3
China Stable 1 package
babylon_images_OS3.0.304.0.WMVCNXM_20260722.0000.00_16.0_cn_07fe75d9e8.tgz
Official China mainland factory Fastboot package for model 2308CPXD0C. Features dual-display panel calibration, Leica camera ISP binaries, and Android 16 base.
MD5: 07fe75d9e81ff39180d13823c682c6f7
Flashing Overview for Xiaomi MIX Fold 3
- Unlock the device bootloader using the official Xiaomi Mi Unlock tool with an approved Mi Account.
- Extract the downloaded .tgz Fastboot archive twice with 7-Zip until "flash_all.bat" appears.
- Turn off the phone completely and hold Volume Down and Power together until FASTBOOT shows on the cover screen.
- Launch Mi Flash Tool, choose the extracted folder, and verify that "clean all" is selected at the bottom.
- Click "Flash" and keep the phone connected until status displays success and the device reboots into HyperOS 3.0.
Expand preparation checklist for Xiaomi MIX Fold 3
- Confirm the hardware codename is "babylon" by checking Settings -> About Phone or running "fastboot getvar product" in Fastboot mode.
- Ensure the internal 4800 mAh battery holds at least 50% charge to ensure stable power during dynamic super partition writes.
- Connect the handset directly to a rear USB 2.0 port on the computer motherboard using a verified USB Type-C data cable.
- Verify that bootloader unlocking is officially granted and completed via the Xiaomi Mi Unlock tool.
- Unpack the downloaded .tgz archive twice using 7-Zip directly to a short root directory such as C:babylon_fw to avoid path length limits.
- Install official Qualcomm USB QDLoader and Google Android Fastboot drivers on a 64-bit Windows PC.
Compatibility & Bootloader Notes
Official Fastboot flashing requires an unlocked bootloader through the Xiaomi Community authorization process. Always select "clean all" (flash_all.bat) when flashing.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi MIX Fold 3, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via Fastboot: Open Fastboot Guide →
Frequently Asked Questions
The Snapdragon 8 Gen 2 Leading Version (SM8550-AC) incorporates an enhanced Qualcomm Adreno Display Processor and dual DSI (Display Serial Interface) PHY controllers. The chipset manages concurrent hardware pipelines for the 6.56-inch 120Hz outer AMOLED and the 8.03-inch 120Hz foldable LTPO OLED+ panel. Integrated Hall-effect sensors detect hinge closure angles, signaling the kernel display driver to switch active framebuffers instantly without frame drops or visual artifacts during fold transitions.
HyperOS 3.0 packages for model 2308CPXD0C utilize a consolidated dynamic "super" partition block mapped directly over high-speed UFS 4.0 flash storage. Logical sub-partitions including system, system_ext, product, vendor, system_dlkm, and vendor_dlkm are formatted in EROFS (Enhanced Read-Only File System). During flashing, flash_all.bat hands execution to userspace fastbootd mode, dynamically sizing logical blocks to accommodate updated Android 16 system files.
While all belong to Xiaomi's foldable family, the MIX Fold 3 (babylon) is built on Qualcomm's SM8550-AC architecture, whereas the MIX Fold 4 (goku) uses the newer Snapdragon 8 Gen 3 (SM8650), and the MIX Flip (ruyi) is a vertical clamshell with distinct single-hinge mechanics and panel controllers. Bootloader preloader binaries, device tree blobs (dtb), TrustZone firmware, and camera ISP drivers are hardware-specific; flashing between these models will corrupt partition layouts and result in an unrecoverable brick.
Android Verified Boot 2.0 uses cryptographic signatures embedded within the vbmeta and vbmeta_system partitions. When flashing stock firmware through flash_all.bat, each partition chunk is validated against public keys burned into the Qualcomm processor's hardware fuse matrix. If a modified image or mismatched regional binary is flashed while attempting to lock the bootloader, AVB validation fails during the initial bootloader handshake and halts boot.