Crucial Warning: When flashing Fastboot packages across regional hardware (for example, putting Global MIUI onto a Chinese MET7 unit), ALWAYS select "clean all" (flash_all.bat) at the bottom of Mi Flash Tool. Never choose "clean all and lock" (flash_all_lock.bat). Locking the bootloader on mismatched regional hardware will cause a hard brick with the fatal error screen: "This MIUI version can't be installed on this device".
Download Firmware for Xiaomi Redmi 5 Plus / Redmi Note 5 (vince)
vince_global_images_V11.0.2.0.OEGMIXM_20191108.0000.00_8.1_global_90dd70aa99.tgz
Final official Global stable Fastboot release for Redmi 5 Plus. Full multilingual support and certified Google Play Services. Flash with "clean all".
MD5: 90dd70aa997c474261523ccbb3c9608f
vince_images_V11.0.3.0.OEGCNXM_20191118.0000.00_8.1_cn_102ca14cd7.tgz
Final official China mainland Fastboot release for Redmi 5 Plus MET7. Stock Chinese software with domestic services.
MD5: 102ca14cd73dae62a7cceaeeda2b94e1
vince_ru_global_images_V9.6.3.0.NEGRUFD_20180625.0000.00_7.1_global_df89ee4a4f.tgz
Stable official Russian regional Fastboot firmware based on Android 7.1.2 Nougat (MIUI 9.6).
MD5: df89ee4a4f021421f713ee23c7e5ebee
xiaomi.eu_multi_HM5Plus_V11.0.3.0.OEGCNXM_v11-8.1.zip
Community-developed Xiaomi.eu custom recovery ROM. Debloated, pre-integrated Google services, and European localization. Flash via TWRP.
MD5: 131b1bd1bac380821b2c7b53b3b4ccf5
twrp-3.7.1_12-0-vince.img
Official TeamWin recovery image for Redmi 5 Plus (vince). Supports MTP, OTG backup, and decrypted data flashing.
⬇️ Download via Direct LinkFlashing Overview for Xiaomi Redmi 5 Plus / Redmi Note 5 (vince)
- Unlock the bootloader using the official Xiaomi Mi Unlock tool.
- Extract the .tgz archive twice using 7-Zip until the folder containing "flash_all.bat" is visible.
- Power off the phone and hold Volume Down + Power together until the Fastboot bunny screen appears.
- Open Mi Flash Tool, select the extracted folder, and choose "clean all" at the bottom right.
- Click "Flash" and keep the USB cable connected until the status column reports "success".
Expand preparation checklist for Xiaomi Redmi 5 Plus / Redmi Note 5 (vince)
- Confirm the device codename is 'vince' by running 'fastboot getvar product' from a command terminal while in Fastboot mode.
- Ensure the handset bootloader is unlocked using the official Xiaomi Mi Unlock tool before flashing Fastboot packages.
- Install Qualcomm USB QDLoader 9008 drivers and Xiaomi Mi Flash Tool (version 2018.05.28 or newer) on a 64-bit Windows PC.
- Check that the 4000mAh battery holds at least 50% charge to prevent unexpected power drops during partition writes.
- Extract the downloaded .tgz archive twice using 7-Zip until 'flash_all.bat' and raw partition images appear in the root folder with no spaces in the folder path.
- Connect the device using an authentic microUSB cable plugged directly into a rear USB 2.0 motherboard port.
Compatibility & Bootloader Notes
Flashing Fastboot TGZ archives via Mi Flash Tool requires an unlocked bootloader through the official Mi Unlock tool. Hard-bricked handsets can be revived through Qualcomm Emergency Download (EDL 9008) mode using motherboard test points.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi Redmi 5 Plus / Redmi Note 5 (vince), including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via Fastboot: Open Fastboot Guide →
Frequently Asked Questions
The Snapdragon 625 (MSM8953) is fabricated on TSMC's 14nm FinFET Low Power Plus (LPP) process, utilizing eight energy-efficient ARM Cortex-A53 cores clocked up to 2.0 GHz. Unlike previous 28nm processors like the Snapdragon 615/616, the 14nm lithography combined with an integrated eMMC 5.1 storage controller and high-efficiency power management IC (PMI8952) allows the Redmi 5 Plus to maintain peak clock frequencies under sustained load without severe thermal throttling or rapid battery drain.
Official Fastboot TGZ images contain raw binary image files (system.img, boot.img, vendor.img, modem.img) written directly to physical eMMC blocks using fastboot protocol and the flash_all.bat batch script. Xiaomi.eu recovery ZIPs, on the other hand, are filesystem payloads installed via custom recoveries like TWRP; they extract pre-configured system files, remove Chinese bloatware, and inject Google Play services directly into the ext4 system partition without modifying modem firmware or low-level bootloader partitions.
Across production runs, Xiaomi sourced 12 MP camera modules from two main vendors: the OmniVision OV12A10 sensor and the Samsung S5K2L7 sensor, both featuring 1.25µm pixel pitch and PDAF. The kernel device tree and libcamera blobs contained in official MIUI Fastboot images include unified camera HAL drivers that detect and initialize either sensor automatically upon hardware boot.
While all three variants share the Qualcomm Snapdragon 625 X9 LTE modem, the physical RF front-end filtering differs significantly. The Global variant (MEG7) includes dedicated SAW filters and power amplifiers for LTE Band 20 (800 MHz), essential for rural 4G in Europe. The Chinese MET7 and Indian MEI7 (Redmi Note 5) omit Band 20 hardware components, instead prioritizing Band 38/39/40/41 TDD-LTE filters for domestic Asian carriers.