Crucial Warning: Flashing via flash_all.bat completely overwrites internal eMMC 5.1 storage partitions, returning the system, vendor, boot, and modem images to factory stock condition. Firmware images carrying the QCQ product tag belong exclusively to the olivewood motherboard. Never attempt to flash firmware intended for the single-camera Redmi 8A (olivelite / QCP) or the fingerprint-equipped Redmi 8 (olive / QCN), as kernel camera drivers and GPIO pin assignments differ and will result in camera detachment, boot failure, or Qualcomm 9008 EDL drops. Always select "clean all" (flash_all.bat) in Mi Flash Tool to avoid locking an imported device.
Official Redmi 8A Dual & 8A Pro Stock ROM Packages
Official Fastboot Factory Images (Redmi 8A Pro - Indonesia / Global) 1 package
olivewood_id_global_images_V12.5.4.0.QCQIDXM_20220830.0000.00_10.0_global_fc8723cbcb.tgz
Official factory Fastboot archive for Redmi 8A Pro Indonesia and international retail handsets. Includes full Google Mobile Services, flash_all.bat restoration script, and Android 10 baseband.
MD5: fc8723cbcb383f7799cb52d99d952808
Official Fastboot Factory Images (Redmi 8A Dual - India) 1 package
olivewood_in_global_images_V12.5.6.0.QCQINXM_20211228.0000.00_10.0_in_b895f6bfc1.tgz
Official factory Fastboot archive for Redmi 8A Dual Indian retail models. Contains India regional baseband configuration, VoLTE profiles, and factory partition images.
MD5: b895f6bfc1cbb9ff9f72b64670545719
PitchBlack Custom Recovery (PBRP) Official Releases 1 package
PBRP-olivewood-3.1.0-20210328-1902-OFFICIAL.zip
Official PitchBlack Recovery Project release for olivewood. Features touchscreen drivers, full backup/restore capability, MTP support, and Android 10 decryption.
MD5: 0d71129f46bad8ab9eb8c87b5c77e2a5
Fastboot Restoration & Flashing Steps
- Unlock olivewood bootloader via Xiaomi Mi account and official Mi Unlock utility
- Decompress olivewood TGZ factory package twice using 7-Zip to extract flash_all.bat
- Connect phone in Fastboot mode (Volume Down + Power) to a rear USB 2.0 port
- Launch Mi Flash Tool, select the firmware root folder, and choose clean all mode
- Execute flash and allow 5 to 7 minutes for Android 10 and MIUI 12.5 first boot
Pre-Flash Hardware Checks & Motherboard Inspection
- Verify that your handset reports codename olivewood by executing 'fastboot getvar product' while connected in Fastboot mode.
- Check the anti-rollback protection index by executing 'fastboot getvar anti' to confirm your package does not trip anti-rollback downgrade limits.
- Ensure the 5000 mAh battery holds at least 50% charge before beginning the flashing procedure to avoid mid-flash power collapse.
- Verify eMMC 5.1 storage integrity on older handsets to rule out read-only NAND wear before writing new partition tables.
- Unlock the bootloader using the official Xiaomi Mi Unlock tool before writing Fastboot factory images.
- Extract your Fastboot package (such as olivewood_id_global_images_V12.5.4.0.QCQIDXM_20220830.0000.00_10.0_global_fc8723cbcb.tgz) twice using 7-Zip until the flash_all.bat script and raw images directory are accessible in a short path without spaces.
- If unbricking a deeply discharged or non-responsive phone via Qualcomm EDL 9008, remove the back cover, disconnect the battery connector, and short the two gold test points located near the camera assembly while connecting your USB Type-C cable.
Snapdragon 439 Partition Layout & Board Architecture
Flashing Fastboot packages with Mi Flash Tool requires an officially unlocked bootloader via the Xiaomi Mi Unlock utility. When flashing across regional builds (such as flashing Indonesian firmware onto an Indian handset), never choose "clean all and lock" (flash_all_lock.bat), as regional hardware signature verification will fail and lock the device into a recovery bootloop.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi Redmi 8A Dual / Redmi 8A Pro, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via Fastboot: Open Fastboot Guide →
Redmi 8A Dual & 8A Pro Architecture & Firmware FAQ
Although the Redmi 8 (olive), Redmi 8A (olivelite), and Redmi 8A Dual / Pro (olivewood) all share Qualcomm's Snapdragon 439 platform, their camera pipelines and physical peripherals differ at the board level. The Redmi 8A (olivelite) houses a single 12 MP sensor (Sony IMX486/IMX363) without a fingerprint reader. The Redmi 8 (olive) houses a 12 MP main sensor, a 2 MP depth sensor, and an active capacitive fingerprint sensor on the rear chassis. The Redmi 8A Dual / Pro (olivewood) houses a 13 MP primary sensor paired with a 2 MP secondary depth sensor, omitting the fingerprint sensor. Because kernel device trees assign different GPIO pins and I2C buses for these sensor layouts, cross-flashing partitions between olive, olivelite, and olivewood causes camera initialization failure, sensor crashes, or immediate bootloops.
The Redmi 8A Dual and Redmi 8A Pro are identical hardware twins marketed under different regional product names. The device was launched as the Redmi 8A Dual (model M2001C3K3I / MZB9011IN) in India, featuring regional MIUI software (QCQINXM). In Indonesia and select international markets, Xiaomi launched the exact same hardware configuration as the Redmi 8A Pro (model M2001C3K3G), featuring the Indonesian Global firmware branch (QCQIDXM). Both models share the olivewood hardware codename and Qualcomm Snapdragon 439 baseband, meaning official Fastboot images can be flashed across both variants provided the bootloader remains unlocked.
Official software updates for olivewood peaked at Android 10 with MIUI 12.5 Enhanced (builds V12.5.4.0.QCQIDXM and V12.5.6.0.QCQINXM). Xiaomi discontinued further Android platform updates because Android 11 and later versions impose significantly higher RAM baselines and aggressive background memory management. Given that entry-level olivewood configurations ship with 2 GB or 3 GB of LPDDR3 RAM and eMMC 5.1 storage, maintaining the Android 10 kernel ensured optimal responsiveness and battery efficiency without triggering constant background app terminations.
The Qualcomm Snapdragon 439 (SDM439) incorporates a dual-channel 32-bit LPDDR3 memory controller running at up to 933 MHz, interfacing with internal eMMC 5.1 flash storage chips sourced from Samsung, Micron, or SK Hynix. On the base 2 GB RAM variant, the Android 10 kernel relies heavily on a 1 GB zRAM swap partition with LZ4 compression to accommodate MIUI background services. Flashing official Fastboot packages restores the factory partition geometry (gpt_both0.bin) and vendor memory tuning parameters, ensuring the low-memory killer (LMK) maintains stability without aggressive task killing.