Crucial Warning: Flashing via flash_all.bat reformats internal UFS 2.2 storage, erasing all user files, photos, and device settings. Packages carrying the ULS build identifier belong strictly to the lightcm hardware platform and must never be flashed directly onto standard light devices (such as global POCO M4 5G or Redmi 10 5G) without modifying partition verification checks. When flashing through Mi Flash Tool, always ensure "clean all" (flash_all.bat) is selected. Never select "clean all and lock" (flash_all_lock.bat) if you have modified packages or cross-flashed regional software, as locking against mismatched cryptographic root-of-trust signatures will brick the phone.
Download Firmware for Xiaomi Redmi Note 11R (lightcm)
Official Fastboot Firmware Packages 1 package
lightcm_images_OS1.0.10.0.ULSCNXM_20240904.0000.00_14.0_cn_47363ca7bb.tgz
Official China Fastboot TGZ package on Android 14.0 with HyperOS 1.0. Use Mi Flash Tool with "clean all" (flash_all.bat) for unbricking and factory restoration.
MD5: 47363ca7bba5534d2f8aac8b8e752008
Official Recovery Firmware Packages 1 package
miui_LIGHTCM_OS1.0.10.0.ULSCNXM_2480e0b8a0_14.0.zip
Official China Recovery OTA ZIP package on Android 14.0 with HyperOS 1.0. Install via stock recovery menu or local system updater.
MD5: 2480e0b8a02b7d2b0f92ab935aa58695
Flashing Overview for Xiaomi Redmi Note 11R (lightcm)
- Unlock Bootloader with Xiaomi Mi Unlock utility
- Install MediaTek MTK USB VCOM and Fastboot drivers
- Extract official Fastboot TGZ package twice with 7-Zip
- Reboot device to Fastboot mode (Volume Down + Power)
- Load folder in Mi Flash Tool, select "clean all", and flash
Expand preparation checklist for Xiaomi Redmi Note 11R (lightcm)
- Verify your phone codename is 'lightcm' by executing 'fastboot getvar product' from a command terminal while in Fastboot mode.
- Unlock the bootloader using the official Xiaomi Mi Unlock tool before attempting Fastboot partition flashing.
- Install official MediaTek MTK USB VCOM drivers and updated Android SDK Platform-Tools (v35+) on a 64-bit Windows PC.
- Ensure the 5,000 mAh battery has at least 50% charge before beginning the flashing procedure to avoid unexpected shutdowns during super partition streaming.
- Extract the Fastboot .tgz archive twice using 7-Zip until the flash_all.bat batch script and images folder appear in a clean directory path.
- Connect the phone directly to a rear motherboard USB 2.0 port using a certified Type-C USB data cable.
Compatibility & Bootloader Notes
Official Fastboot flashing requires an officially unlocked bootloader via the Xiaomi Mi Unlock utility. Emergency BROM mode on MediaTek Dimensity 700 requires authorized service center credentials or a MediaTek USB bypass utility.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi Redmi Note 11R (lightcm), including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via Fastboot: Open Fastboot Guide →
Frequently Asked Questions
The Dimensity 700 (MT6833) is manufactured on TSMC's 7nm process. It incorporates an octa-core CPU layout comprising two ARM Cortex-A76 performance cores running at 2.2 GHz and six ARM Cortex-A55 efficiency cores clocked at 2.0 GHz, coupled with a dual-core Mali-G57 MC2 graphics processor. Storage operations are driven by a dual-channel UFS 2.2 host controller capable of sequential read speeds over 900 MB/s, facilitating rapid streaming and writing of multi-gigabyte sparse partition chunks during Fastboot operations.
Under Android 14 HyperOS 1.0, the Redmi Note 11R uses Android dynamic partitions. The individual logical partitions (system, system_ext, vendor, and product) are grouped within a centralized physical super partition (super.img). During Fastboot flashing with flash_all.bat, the handset automatically reboots from bootloader Fastboot into userspace fastbootd to resize and flash these dynamic logical blocks safely.
The Redmi Note 11R (lightcm / 22095RA98C) is a China carrier-focused sibling of the global POCO M4 5G, Redmi Note 11E, and Redmi 10 5G (codename light). While both share the underlying MediaTek Dimensity 700 motherboard, display dimensions, and 5000 mAh battery, Xiaomi compiled distinct bootloader definitions for lightcm. Flashing standard light Fastboot images on lightcm causes flash_all.bat to stop with a product mismatch error unless the script assertion is adjusted.
Xiaomi build identifiers convey key technical parameters: "U" designates the Android 14 operating system base, "LS" represents the lightcm hardware model code, "CN" designates the China regional software branch without Google Mobile Services, and "XM" indicates standard factory unlocked distribution. The 20240904.0000.00 timestamp specifies the factory compile date.