Crucial Warning: Hardware Platform Demarcation Warning: While evergo shares the Dimensity 810 reference motherboard with the POCO M4 Pro 5G (codename evergreen), official stock packages carry separate regional bootloader signatures and radio parameters. Cross-flashing evergo firmware onto evergreen devices can trigger baseband failure or bootloops. In Mi Flash Tool, always select "clean all" (flash_all.bat); never select "clean all and lock" on cross-regional hardware.
Official HyperOS & Custom Recovery Packages (evergo)
Custom Recovery (evergo) 1 package
OrangeFox-R12.0-Unofficial-evergo.zip
Custom OrangeFox recovery build optimized for MediaTek Dimensity 810 dynamic partitions and Android 13 decryption.
MD5: ab762e9020b155e2581986a3fac2de6e
India Official Firmware (Redmi Note 11T 5G) 2 packages
evergo_in_global_images_OS1.0.1.0.TGBINXM_20240307.0000.00_13.0_in_bab47e0b8a.tgz
Official India Stable Fastboot factory restoration image for Redmi Note 11T 5G on HyperOS 1.0.
MD5: bab47e0b8a93e61de27f129fa7f3480f
miui_EVERGOINGlobal_OS1.0.1.0.TGBINXM_64950b1fe9_13.0.zip
Official India Stable Recovery update package for Redmi Note 11T 5G.
MD5: 64950b1fe9031dbbaae4b566c29b7a13
China Official Firmware (Redmi Note 11 5G) 2 packages
evergo_images_OS1.0.1.0.TGBCNXM_20240206.0000.00_13.0_cn_chinatelecom_206d4e6226.tgz
Official China Stable Fastboot factory package for Redmi Note 11 5G (China Telecom edition).
⬇️ Download via MIUI OTAmiui_EVERGO_OS1.0.1.0.TGBCNXM_30dc3f8271_13.0.zip
Official China Stable Recovery package for Redmi Note 11 5G.
MD5: 30dc3f827167a1b6eeb1838deb1fe251
Fastboot & Mi Flash Restoration Sequence
- Verify evergo hardware codename and Anti-Rollback index via fastboot getvar
- Decompress official Dimensity 810 Fastboot TGZ archive twice with 7-Zip
- Boot handset into Fastboot mode and confirm stable MediaTek USB handshake
- Execute flash_all.bat in Mi Flash Tool with clean all selected
- Allow complete UFS 2.2 super.img partition write to finish and observe reboot
Pre-Flash Hardware Verification & Platform Demarcation
- Execute 'fastboot getvar product' in command prompt to confirm the device bootloader returns 'evergo' or 'evergo_in'—never attempt flashing if the device returns 'evergreen' (POCO M4 Pro 5G) or 'selenes' (Redmi Note 11 4G).
- Check your device Anti-Rollback index using 'fastboot getvar anti' to prevent unpermitted downgrades below the Android 13 baseline.
- Be aware of MediaTek Dimensity 810 SLA/DA authentication: low-level BROM recovery via SP Flash Tool requires an auth bypass utility to negotiate with the MT6833P chip.
- Verify battery charge level: ensure the 5000 mAh cell has at least 50% charge to prevent brownouts during multi-gigabyte super.img writes.
- Extract evergo_in_global_images_OS1.0.1.0.TGBINXM_20240307.0000.00_13.0_in_bab47e0b8a.tgz twice using 7-Zip directly to a short root directory like C:vergo_fw to avoid command prompt path truncation.
MediaTek Dimensity 810 Platform Taxonomy (evergo)
Fastboot flashing requires an officially unlocked bootloader via the Xiaomi Mi Unlock utility. Packages under codename evergo are built for the Redmi platform and must not be cross-flashed onto POCO M4 Pro 5G (evergreen).
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi Redmi Note 11 5G / Redmi Note 11T 5G, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Xiaomi evergo Architecture & Sibling Identity FAQ
Underneath their exterior shells, both phones share the same 6nm MediaTek Dimensity 810 MT6833P platform, 6.6-inch 90Hz display, and 5000 mAh battery. However, the POCO M4 Pro 5G (evergreen) was released globally with an integrated NFC controller and POCO launcher branding, whereas the Redmi Note 11T 5G (evergo_in) was targeted at India and omits NFC. Their stock Fastboot packages carry distinct regional bootloader signatures and should not be cross-flashed.
The Xiaomi.eu custom ROM project focuses almost exclusively on Qualcomm Snapdragon chipsets and select flagship MediaTek Dimensity SoCs. Due to proprietary MediaTek closed-source vendor binaries and BROM cryptographic barriers, Xiaomi.eu does not publish ROM builds for Dimensity 810 evergo handsets.
While 4G models in the Redmi Note 11 family use Qualcomm Snapdragon 680 chipsets, evergo operates on MediaTek architecture with distinct low-level boot blocks including preloader, lk (Little Kernel), and tee. Flashing operations on evergo utilize MediaTek Download Agent handshakes rather than Qualcomm Firehose protocols.
The Redmi Note 11 5G and Note 11T 5G concluded their official software lifecycle on Android 13 with HyperOS 1.0 (such as OS1.0.1.0.TGBINXM and OS1.0.1.0.TGBCNXM builds). Xiaomi did not extend official Android 14 or HyperOS 2.0 upgrades to this Dimensity 810 generation.