Archos 101 Platinum 3G Firmware Flash File Download [Stock Rom]
The Archos 101 Platinum 3G is a 10.1-inch Android tablet released in 2017, designed for budget-friendly multimedia use and light productivity. It is powered by a MediaTek MT6580 chipset and runs on Android 7.0 Nougat. If your device is bricked, stuck on the boot logo, or facing software issues such as crashing apps, flashing the official stock firmware is the best way to restore its stability.
⚠️ CRUCIAL WARNING:
This firmware is specifically for the Archos 101 Platinum 3G (MT6580). Flashing with the wrong build or on the Wi-Fi only variant may cause the touchscreen, network, or other hardware components to stop working. Always verify your exact model before proceeding.
⚙️ Prerequisites: Before You Begin
Click Here for the Essential Pre-Flashing Checklist
- Backup Data: Flashing wipes all internal storage. Save photos, contacts, and important files first.
- Battery: Ensure at least 50% charge to prevent unexpected shutdowns.
- PC & Cable: A Windows PC and a reliable micro USB cable are required.
- Install MTK Drivers: Without proper drivers, the tablet won’t be detected in flashing mode.
📱 Quick Device Specifications
- Device
- Archos 101 Platinum 3G
- Release Year
- 2017
- Chipset
- MediaTek MT6580 (32-bit)
- Display
- 10.1-inch IPS LCD, 1280 × 800 px
- Battery
- ~5000 mAh
- Operating System
- Android 7.0 Nougat
- RAM / Storage
- 1GB RAM / 16GB ROM
🛠 Required Tools & Downloads
| File / Tool | Download Link |
|---|---|
| SP Flash Tool | Download Tool |
| MediaTek USB VCOM Drivers | Download Drivers |
⬇️ Archos 101 Platinum 3G Stock ROM / Firmware
| Model | Android | Chipset | Type | Download | Size |
|---|---|---|---|---|---|
| 101 Platinum 3G | 7.0 Nougat | MediaTek MT6580 | SP Flash Tool | MediaFire | ~1.2 GB |
⚡ Quick Flashing Guide
- Download and install the MediaTek USB VCOM drivers. Extract the firmware file (
Archos_101_Platinum_3G_MT6580_20170517_7.0.zip) and SP Flash Tool on your PC. - Launch
flash_tool.exe, then click on “Scatter-loading” and select theMT6580_Android_scatter.txtfile inside the firmware folder. - Ensure the flashing mode is set to “Download Only.”
- Switch off your tablet completely. Click “Download” in SP Flash Tool and connect the device to the PC with the USB cable.
- Wait for the process to complete. Once the green checkmark appears, disconnect and reboot the tablet.
👉 Need a full walkthrough? Follow our detailed guide here:
How to Flash MediaTek Firmware with SP Flash Tool
❓ Frequently Asked Questions (FAQs)
- Q1. The tablet shows no SIM card even after flashing. How do I fix this?
- If the IMEI was erased during flashing, mobile connectivity won’t work. Restore your original IMEI using Maui META or SN Write Tool.
- Q2. I keep getting “BROM ERROR: S_FT_ENABLE_DRAM_FAIL” in SP Flash Tool. What does this mean?
- This error points to an incompatible or corrupted firmware build. Double-check you are using the MT6580 firmware specific to the 101 Platinum 3G, and re-extract the files before flashing again.
- Q3. Can I upgrade this tablet beyond Android 7.0?
- No official update beyond Android Nougat is available. Custom ROMs may exist, but they often lack stability on low-end MT6580 devices.
🔧 Device-Specific Troubleshooting
- Bootloop After Flash: Perform a wipe data/factory reset from recovery mode if the device is stuck at the Archos logo after flashing.
- Display Issues (no backlight/touch): Some 101 Platinum 3G tablets ship with different screen hardware. If display or touch doesn’t work after flashing, try a different firmware version intended for your exact hardware revision.
- Storage Showing 0 MB: If internal storage is not detected, repeat the flash with Firmware Upgrade instead of “Download Only.”
