Q1. The tablet is stuck on the Archos logo after flashing. What should I do?

This usually requires a factory reset from recovery mode. Power off the device, hold Power + Volume Up, then choose “Wipe Data/Factory Reset.”

Q2. Why does SP Flash Tool show “PMT changed for the ROM” error?

This means the partition table is mismatched. Use the Firmware Upgrade option instead of “Download Only.”

Q3. My tablet is not detected by SP Flash Tool. How can I fix this?

Reinstall the MediaTek VCOM drivers, try a different USB port/cable, and hold Volume Down while connecting the tablet.

Archos 116 Neon Stock Firmware (Flash File)

The Archos 116 Neon is a large-screen Android tablet from the French electronics company Archos, built for media consumption and educational use. Powered by a MediaTek MT8163 chipset, it offers basic performance for web browsing, streaming, and lightweight apps. If your Archos 116 Neon is stuck in a bootloop, bricked, or suffering from severe software problems, installing the official stock ROM is the most effective way to restore it.

⚠️ CRUCIAL WARNING:
This device uses a MediaTek MT8163 chipset. Flashing requires the SP Flash Tool and will erase all user data. If your tablet has a secure bootloader, you may also need an Authentication (Auth) Bypass method for flashing.

⚙️ Prerequisites: Before You Begin

Click Here for the Essential Pre-Flashing Checklist

Backup Data: All photos, files, and personal data will be erased.
Battery: Ensure at least 50% charge before flashing.
Windows PC & USB Cable: You need a Windows PC with a micro USB cable.
Install MTK Drivers: Without proper drivers, the flashing tool will not detect your device.

📱 Quick Device Specifications

Device: Archos 116 Neon
Release Year: 2018
Chipset: MediaTek MT8163
Display: 11.6-inch IPS LCD
Battery: 5000 mAh (typical)
Operating System: Android 7.0 Nougat
RAM / Storage: 2GB / 16GB

🛠 Required Tools & Downloads

File / Tool	Download Link
SP Flash Tool	Download Tool
MediaTek USB VCOM Drivers	Download Drivers

⬇️ Archos 116 Neon Stock ROM / Firmware

Model	Android	Chipset	Type	Download	Size
116 Neon	7.0 Nougat	MediaTek MT8163	SP Flash Tool	MediaFire	~1.3 GB

⚡ Quick Flashing Guide

Download and install the MediaTek VCOM drivers. Extract both the firmware file (Archos_116_Neon_MT8163_20180314_7.0.zip) and SP Flash Tool on your computer.
Open flash_tool.exe and load the MT8163_Android_scatter.txt file from the extracted firmware folder.
Set flashing mode to “Download Only.”
Power off the tablet completely. Click “Download” in SP Flash Tool, then connect the device via USB.
Wait until you see the green checkmark. Disconnect and reboot your tablet.

👉 For step-by-step flashing instructions, follow our detailed guide:
How to Flash MediaTek Firmware with SP Flash Tool

❓ Frequently Asked Questions (FAQs)

Q1. The tablet is stuck on the Archos logo after flashing. What should I do?: This usually requires a factory reset from recovery mode. Power off the device, hold Power + Volume Up, then choose “Wipe Data/Factory Reset.”
Q2. Why does SP Flash Tool show “PMT changed for the ROM” error?: This means the partition table is mismatched. Use the Firmware Upgrade option instead of “Download Only.”
Q3. My tablet is not detected by SP Flash Tool. How can I fix this?: Reinstall the MediaTek VCOM drivers, try a different USB port/cable, and hold Volume Down while connecting the tablet.

🔧 Device-Specific Troubleshooting

No Wi-Fi or Bluetooth after flashing: Reflash the firmware ensuring that all partitions, including NVRAM, are selected. Corrupted NVRAM can cause wireless issues.
Touchscreen not responding: Some Archos 116 Neon units use different display panels. If the screen doesn’t work after flashing, you may need a firmware build that matches your exact hardware revision.
Invalid IMEI: If the tablet loses IMEI after flashing, use a tool like Maui META to restore it. Always note down your original IMEI before flashing.