Crucial Warning: These packages are for the OPPO A9 firmware family built around PCAM10 and, in several cases, PCAT10; they should not be treated as universal OPPO A9 files because this set also includes converted builds tied to CPH1969EX, which is associated with the OPPO F11 Pro rather than a plain stock PCAM10 target. Files marked SCATTER belong to a MediaTek SP Flash Tool workflow, while the UFI dump is specialist service material; flashing either one casually, or mixing a converted F11/global package into the wrong repair job, can turn a software issue into a deeper board-level recovery case.
Download Firmware for OPPO A9
PCAM10_11_F.11_2022072319323225.rar
Newest dated non-scatter package in this set. Good starting point when the goal is a newer software base without immediately jumping to converted files.
⬇️ Download via Google DrivePCAM10_11_F.07_2021101921225089.rar
Downgrade target or recovery from a bad newer modification. Useful when F.11 behaves differently on a repaired unit.
⬇️ Download via Google DrivePCAM10_11_F.07_2021101921225089_SCATTER.rar
For technicians who specifically need a scatter-ready build. Safer than guessing with the plain archive if your repair workflow is already SP Flash Tool based.
⬇️ Download via Google DrivePCAM10_PCAT10_11_C.43_200918_c87bc03e.rar
Newest dated C-branch package and the largest regular archive in this set, which often makes it more appealing for full restore attempts.
⬇️ Download via Google DrivePCAM10_PCAT10_11_C.31_200918_4564331f.rar
Good option for users rolling back from a problematic newer package, or comparing beside C.43 if the higher build is not necessary.
⬇️ Download via Google DrivePCAM10_PCAT10_11_C.15_200918_d2cbdcfc.rar
Older than C.31 and C.43, so mainly a compatibility choice for testing or fallback rather than the best "latest build" choice.
⬇️ Download via Google DrivePCAM10_PCAT10_11_F.17_200828_dc90228f.rar
Likely the best 2020 F-branch option before the later F.07 and F.11 releases.
⬇️ Download via Google DrivePCAM10_PCAT10_11_F.13_200826_75a61388.rar
Fallback option for users avoiding the newest 2020 F build. Close in age to F.17, mostly useful when a slightly earlier branch is wanted.
⬇️ Download via Google DrivePCAM10_PCAT10_11_F.15_200730_956c7d3a.rar
Step-down choice when testing several F-series builds, useful for staged troubleshooting when later branches behave differently after repair.
⬇️ Download via Google DrivePCAM10_PCAT10_11_F.14_200719_4c11acd7.rar
Older than F.15, F.13, and F.17, so use it only when this specific revision is needed.
⬇️ Download via Google DrivePCAM10_11_A.18_200220_10d3a3db_SCATTER.rar
Clear SP Flash Tool candidate for technicians repairing an older board on an early software base.
⬇️ Download via Google DriveOppo_A9_PCAM10_11_A.11_190729.zip
Reasonable clean early reference build for users wanting an older stock-style baseline.
⬇️ Download via Google DrivePCAM10_11_A.11_190729_1cca1a33.rar
Alternative A.11 archive if the ZIP package is unavailable — same dated branch, different archive format.
⬇️ Download via Google DrivePCAM10_11_A.11_190729_1cca1a33_SCATTER.rar
Best early scatter option for technicians repairing a device closest to its original branch.
⬇️ Download via Google DrivePCAM10_11_A.11_FILE_DUMP_FULL_USERPART_OS9_UFI.rar
Chip-level service recovery, data-partition repair, advanced bench work. Not a normal consumer flash package and should not be treated like a regular stock ROM.
⬇️ Download via Google DrivePCAM10_PCAT10_11_A.09_190626_1cca1a33.rar
Oldest clearly dated package in this set. Use only when a very early branch is required for archival rollback.
⬇️ Download via Google DrivePCAM10_CONVERTED_TO_F11_C.17_OS10_SCATTER.rar
High-risk file for advanced users intentionally moving to an F11-based service build — a conversion package, not a straightforward stock PCAM10 archive.
⬇️ Download via Google DrivePCAM10_CONVERTED_GLOBAL_OS10_SCATTER.rar
Advanced repair cases needing a converted global-style base. Not a clean first choice for routine repair.
⬇️ Download via Google DriveA9(PCAM10_CONVERTED_GLOBAL_CPH1969EX_11_C.31_SCATTER.rar
Technician-only conversion work. Points at a CPH1969EX base, and CPH1969 is associated with the OPPO F11 Pro, so treat as a non-stock conversion file.
⬇️ Download via Google DriveFlashing Overview for OPPO A9
- Match the phone to the right family: normal PCAM10 / PCAT10 for stock repair, avoid converted CPH1969EX or F11 files unless intentional
- For plain archives (A.11, C.43, F.11), extract fully and inspect contents before choosing a tool
- For files already labeled SCATTER, load the scatter file in SP Flash Tool
- Treat converted global, converted-to-F11, and the UFI dump as advanced-repair files only, not routine updates
- After flashing, test boot stability, camera, fingerprint, charging, and network before restoring personal data
Expand preparation checklist for OPPO A9
- Confirm the label and board identity first, because this page mixes PCAM10, PCAT10, and converted packages that do not belong to the same risk level.
- Back up everything you still can, especially on a working device, because service flashing on MediaTek phones is often used only after normal recovery has already failed.
- If the filename includes SCATTER, prepare SP Flash Tool and MediaTek drivers instead of guessing with an OTA-style method.
- Extract every plain ZIP or RAR first and inspect the contents; do not assume a non-scatter archive is ready for direct flashing.
- Avoid the converted global and F11-based files unless you are intentionally handling a conversion case, because those are not the safest first-line restore choice for a normal OPPO A9 repair.
- Reserve the UFI dump for bench-level service work, not regular home flashing.
Compatibility & Bootloader Notes
Because this is a MediaTek OPPO service-flashing workflow, authentication or BROM-related hurdles can appear in SP Flash Tool on PCAM10 repair jobs. Converted global, F11-based, and UFI packages should be treated as advanced-repair material rather than routine updates.
Ready to Flash This Firmware?
Full step-by-step instructions for OPPO A9, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's SP Flash Tool guide.
Can also be flashed via ADB Sideload: Open ADB Sideload Guide →
Frequently Asked Questions
In this package set, several filenames pair PCAM10 and PCAT10 together, and service sources also group them under the China A9 firmware family. That does not mean every file is interchangeable without checking the exact device first, but it does explain why many repair archives mention both model codes in one package name.
The least confusing starting choices are the dated non-converted archives such as F.11, F.07, C.43, or A.11, because they look like regular branch builds rather than service conversions or chip-level dumps. Files explicitly labeled converted global, F11, or UFI should be left for cases where a normal stock-style restore is no longer enough.
Scatter packages are meant for MediaTek flashing workflows, and service guides for the OPPO A9 PCAM10 point directly to SP Flash Tool and scatter loading for this type of firmware. That makes them more predictable for technician repair work than a plain archive whose internal format has not been checked yet.
Those packages are not plain stock PCAM10 archives. One service listing explicitly ties these conversions to global or CPH1969EX bases, and CPH1969 is associated with the OPPO F11 Pro, so they should be treated as cross-model service conversions. That is why they are a poor first choice when the goal is simple stock restoration.
Yes. The OPPO A9 launched on Android 9 / ColorOS 6, and later reporting shows a stable Android 10-based update for the OPPO A9 and the related F11 series. That helps explain why this file set spans early A-series builds and later C/F maintenance branches.
Firmware can help if the current system is corrupted, unstable, or bloated, but it will not change the basic hardware ceiling of the Helio P70 platform. On this model, flashing is more useful for restoring smooth daily performance than for turning it into a much faster gaming phone.
No. A full userpart UFI dump is specialist repair material and is not the right entry point for everyday flashing, especially when regular archives or scatter packages are still available.