Crucial Warning: Confirm your model is 1501-M02 before flashing. The 360 F4 was also released in an all-network version (1501-A02). Do not flash cross-model CPB packages, as differences in baseband calibration and modem partitions can lead to network loss or boot problems.
Download Firmware for 360 F4
360F4移动版1501-m025.1.091.P1.1501_M02_signed.CPB
Official factory signed CPB package for China Mobile edition 1501-M02. Clean tested ROM. MD5: e99e99d4d770c5f96ddb877dba48b23c.
⬇️ Download via Google DriveFlashing Overview for 360 F4
- Install MediaTek USB VCOM drivers and Coolpad YGDP Tool on your computer
- Open YGDP Tool and enter default password 369 or 963 to log in
- Click "Assembly", select the 1501-M02 CPB firmware file, and click "Apply" to unpack
- Power off the phone completely
- Hold Volume Up (or Volume Down), plug in the USB cable, and click "Start" in YGDP to flash
Expand preparation checklist for 360 F4
- Check that your phone model is 1501-M02 under Settings -> About Phone or on the rear label.
- Install MediaTek USB VCOM drivers and Coolpad YGDP Tool on your Windows PC.
- Make sure the battery is charged to at least 40% before you begin.
- Use a reliable microUSB cable plugged into a main computer port.
- Back up your personal data, as flashing with YGDP will erase user storage.
Compatibility & Bootloader Notes
Official factory CPB packages flash via YGDP over MediaTek Preloader / BootROM mode. Unlocking the bootloader is not required when flashing signed factory CPB files.
Ready to Flash This Firmware?
Full step-by-step instructions for 360 F4, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's YGDP Tool (Coolpad/360) guide.
Can also be flashed via SP Flash Tool: Open SP Flash Tool Guide →
Frequently Asked Questions
The 1501-M02 is the China Mobile edition, built specifically for TD-LTE and TD-SCDMA networks. The 1501-A02 is the Netcom all-network variant with broader band support. While both share the same MT6753 hardware, each requires its own model-matched CPB file to preserve modem functionality.
Official CPB files are packaged specifically for YGDP Tool. While third-party unpacking scripts exist, flashing the complete signed CPB package directly with YGDP Tool is the safest factory method and prevents partition alignment errors.
When opening YGDP Tool, enter the standard factory password 369. If 369 is not accepted by your specific software build, try 963.
Yes. Flashing a full CPB firmware package completely writes the factory system, cache, and userdata partitions. Save a backup of any important files before you begin.