Crucial Warning: Never flash a China domestic package (Section 2) or a Huawei GR5 (KII) package onto an international Honor 5X (KIW-L21 or KIW-L24). Sibling models share chipset architecture but have incompatible oeminfo partition signatures. Always verify your exact model number from the regulatory label under settings or in recovery before flashing.
Download Firmware for Honor 5X
Section 1: European & North American Models (KIW-L21 & KIW-L24) 11 packages
Honor_5X_Firmware_KIW-L21_Android_6.0.1_EMUI_4.0_C432B330CUSTC432D001.zip
Official European open-market Android 6.0.1 Marshmallow update for KIW-L21.
⬇️ Download via AFH2018-07-29--06-23-50_KIW-L21C432B371.zip
Official late European maintenance release for KIW-L21 dual-SIM.
⬇️ Download via AFH2018-07-29--05-04-15_KIW-L21C432B370.zip
Official European maintenance build for dual-SIM KIW-L21 handsets.
⬇️ Download via AFHKIW-L21C432B130CUSTC432D005.dload.modaco.zip
Official European factory Lollipop release for KIW-L21.
⬇️ Download via AFHHuawei 5X KIW-L21_ Android 6.0.1 C185B310.7z
Official Middle East and African regional Marshmallow update.
⬇️ Download via AFHHonor_5X_KIW-L21_5.1.1_EMUI_3.1_05021UMN_Dump_HMT.zip
Factory board dump for low-level QPST/QFIL unbricking of KIW-L21. BOM Code: 05021UMN.
⬇️ Download via Google DriveHonor_5X_KIW-L22_C900B076_Board_Software_West_European_Region_Android5.1.1_EMUI_3.1_MFU_HMT.zip
Low-level factory QPST/QFIL repair package for European Kiwi hardware.
⬇️ Download via Google DriveHonor 5X_Firmware_KIW-L24_Android 6.0.1_EMUI 4.0_C567B331_United States.zip
Official US open-market Android 6.0.1 Marshmallow update for KIW-L24.
Honor5X_Firmware_KIW-L24_Android5.1_EMUI3.1_C567B151_UnitedStates_Channel-Others.zip
Official US open-market Lollipop release for KIW-L24.
Honor 5x Firmware_KIW-L24_Android 5.1_EMUI 03.1_C567B140.zip
Initial launch dload package for US open-market KIW-L24.
⬇️ Download via AFHSection 2: China Domestic Channel (KIW-AL10, KIW-CL00, KIW-UL00, KIW-TL00) 5 packages
Honor_5X_KIW-CL00_C92B437_Firmware_China_Nonspecific_Android_6.0_EMUI_4.0_05013YUB_Dload.zip
Official China Telecom dload package. BOM Code: 05013YUB.
⬇️ Download via Google DriveKIW-TL00_C01B443 Firmware China Nonspecific Android 6.0 EMUI 4.0 05013YUC.zip
Official China Mobile carrier dload package. BOM Code: 05013YUC.
⬇️ Download via Google DriveHuawei_KIW-AL10_KIW-AL10C92B430_China_6.0.1.zip.rar
Official China All-Netcom Marshmallow release for KIW-AL10.
⬇️ Download via AFHHuawei_KIW-TL00H_KIW-TL00HC00B236_5.1.1.zip.rar
Official China Mobile High Edition dload update for KIW-TL00H.
⬇️ Download via AFHHonor_5X_KIW-UL00_C00B167_Board_Software_China_Channel-Others_Android_5.1.1_EMUI_3.1_05021UHV_HMT.zip
Low-level factory QPST/QFIL repair package for China Unicom KIW-UL00. BOM Code: 05021UHV.
⬇️ Download via Google DriveFlashing Overview for Honor 5X
- Confirm your exact model (e.g. KIW-L21 vs KIW-L24) from fastboot or recovery
- Select the matching section above (European/US models or China Domestic)
- Format a microSD card to FAT32 MBR and create a root folder named dload
- Extract your downloaded package and copy the UPDATE.APP file directly inside dload
- Power off phone, hold Vol+, Vol-, and Power together until EMUI update starts
Expand preparation checklist for Honor 5X
- Verify the exact model number (e.g. KIW-L21, KIW-L24, KIW-AL10) on the rear casing or fastboot screen before downloading.
- Ensure the 3000mAh battery has at least 50% charge to prevent power loss during partition writes.
- For dload installation, format a microSD card to FAT32 MBR and place the UPDATE.APP file into a folder named dload at root level.
- For low-level QPST/QFIL unbricking, connect via an authentic microUSB cable directly to a rear PC motherboard USB 2.0 port.
- Never erase modemst1, modemst2, or fsg partitions during raw partition flashing to preserve factory RF calibration and IMEI certificates.
Compatibility & Bootloader Notes
Standard dload updates install through stock EMUI recovery without requiring bootloader unlocking. However, the bootloader validates the carrier Cust signature (e.g. C432 Europe, C567 United States, C185 Middle East, C00 China). Cross-flashing packages across incompatible regions via dload will be rejected at verification. For recovering unbootable devices with damaged partition tables, technicians force Qualcomm Emergency Download (EDL 9008) mode using motherboard testpoints with QFIL or QPST.
Ready to Flash This Firmware?
Full step-by-step instructions for Honor 5X, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Huawei UPDATE.APP guide.
Can also be flashed via QFIL: Open QFIL Guide →
Frequently Asked Questions
Although both devices share the Qualcomm Snapdragon 616 (MSM8939v2) platform and 5.5-inch 1080p chassis, they carry different product IDs, regulatory model codes (KIW vs KII), and distinct cryptographic OEM certificates in the secure oeminfo partition. Flashing Huawei GR5 KII firmware onto an Honor 5X KIW board will fail signature verification in stock recovery and risk bricking the bootloader if forced via raw partition tools.
Huawei engineered the Kiwi platform with a distinct 3-slot layout containing two independent nano/micro-SIM slots and a dedicated microSD slot. This architectural choice avoided the trade-off of hybrid trays. The bootloader and radio modem firmware are calibrated to maintain dual active standby (DSDS) without compromising external storage bus routing.
Standard dload packages are consumer/service container files verified by EMUI recovery, requiring operational bootloader partitions and a valid partition table. Factory board software archives contain raw binary images (rawprogram0.xml, patch0.xml, prog_emmc_firehose_8939.mbn) designed for low-level Qualcomm Emergency Download (EDL 9008) mode. Technicians use board software when a phone is hard-bricked, unresponsive, or suffering from damaged partition tables.
BOM (Bill of Materials) codes identify the factory hardware bill, including specific display panel supplier revisions (AUO, Tianma, or JDI) and touch IC controllers (Synaptics vs Goodix). Flashing firmware that matches your handset's original factory BOM code ensures the kernel loads the correct panel timings and touch calibration, preventing blank displays or inverted touch axes after a complete reflash.