Crucial Warning: These firmware packages carry the Honor DUA cryptographic signature. Never attempt to flash these packages onto a Huawei Y5 2018 (DRA-L21, DRA-LX5, etc.), and never flash Huawei DRA firmware on the Honor 7S. Always verify that your model starts with DUA before proceeding.
Download Firmware for Honor 7S
Honor_7A_DUA-L22_1.0.0.104_C185_VR_8.1.0_Dload.zip
Official global open-market dload update package (scraper archive originally mislabeled as Honor 7A).
⬇️ Download (2 links)
Honor_7A_DUA-LX2_MT6739_1.0.0.131_C10_Firmware_8.1.0_R1_NA_05015EDA.zip
Official Russian regional dload release. BOM Code: 05015EDA.
⬇️ Download via Google DriveHonor_7S_DUA-L22_8.0_IMEI_Repair_FRP_Reset_C185_Firmware_Dload.zip
Specialized service repair dload package pre-configured for baseband restoration and FRP recovery.
⬇️ Download via MediaFireHonor_7S_DUA-AL00_MT6739_1.0.0.101_C675_8.1.0_R1_NA_05015FCD.zip
Official Indian retail dload package. BOM Code: 05015FCD.
⬇️ Download (3 links)
Honor_7S_Dura-AL00IA_MT6739_1.0.0.101_C675_8.1.0_R1_NA_05015FCD.zip
Full factory service dload release for Indian sub-variant Dura-AL00IA. BOM Code: 05015FCD.
⬇️ Download via MediaFireFlashing Overview for Honor 7S
- Verify your model is an Honor DUA unit (e.g. DUA-L22 or DUA-AL00) before downloading
- Format a microSD card to FAT32 MBR and create a root directory named dload
- Extract the downloaded ZIP package and copy UPDATE.APP into the dload directory
- Power down phone, insert the microSD card, and hold Volume Up, Down, and Power together
- Release buttons once the EMUI installation wheel appears and allow it to finish
Expand preparation checklist for Honor 7S
- Check the exact model code on the device back cover or fastboot menu (e.g. DUA-L22, DUA-LX2, DUA-AL00) before downloading.
- Ensure the 3020mAh battery is charged to at least 50% to prevent unexpected shutdowns during flashing.
- For standard dload flashing, use a quality microSD card formatted as FAT32 MBR and copy the UPDATE.APP into a root folder named dload.
- For low-level SP Flash Tool recovery, connect using a certified microUSB cable plugged directly into a rear PC USB 2.0 port.
- When repairing a soft-bricked device with SP Flash Tool, always keep preloader and nvram unchecked to safeguard factory IMEI calibration.
Compatibility & Bootloader Notes
The Honor 7S is built on the MediaTek MT6739 chipset but enforces the Honor DUA OEMinfo cryptographic signature. Attempting to install Huawei Y5 (DRA) packages on this device will cause stock recovery to stop with "Software install failed". Standard dload updates do not require unlocking the bootloader. For SP Flash Tool recovery, use the MTK All-in-One DA agent with MTK auth bypass.
Ready to Flash This Firmware?
Full step-by-step instructions for Honor 7S, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Huawei UPDATE.APP guide.
Can also be flashed via SP Flash Tool: Open SP Flash Tool Guide →
Frequently Asked Questions
While Huawei and Honor shared the MediaTek MT6739 reference board architecture in 2018, Honor units use the DUA board designation and distinct OEMinfo cryptographic signatures. The stock recovery checks these certificates during installation, so flashing Huawei DRA packages on an Honor DUA device will fail verification.
The Indian editions were customized for the local market with dual VoLTE carrier support (specifically for Reliance Jio and Airtel India) and region-specific regulatory calibrations. Dura-AL00IA is the internal manufacturing factory code for the Indian dual-SIM assembly line.
Several third-party scrapers and mirror repositories mistakenly grouped DUA-L22 and DUA-LX2 archives under the Honor 7A folder name because both models launched in the same quarter. However, the real Honor 7A is an AUM-model phone built on Qualcomm Snapdragon 430, whereas DUA-L22 is strictly the MediaTek MT6739 Honor 7S.
The repair dload archive contains a modified boot and modem image pre-configured for authorized service centers. It allows technicians to restore corrupted NVRAM calibration blocks and recover baseband connectivity after failed flashing attempts without needing a full board swap.