Crucial Warning: Never flash a CAZ package (Section 3) onto a standard 5.0-inch CAN motherboard (Section 1 or 2). CAZ files are built for the 5.5-inch sibling chassis and will cause display digitizer failure or bootloops. Ensure your download matches your device model and carrier Cust code.
Download Firmware for Huawei Nova
Section 1: European & Global Models (CAN-L01, CAN-L11, CAN-L12, CAN-L13) 7 packages
Huawei_Nova_CAN-L01_vodafone_default_HLRCF_Cannes-L01C02B380_XMl_Firmware_Dead_Boot_Auto_Recovery_Fix.zip
Emergency XML board package for unbricking Vodafone CAN-L01 handsets via EDL 9008 mode.
⬇️ Download via AFHHuawei_Nova_CAN-L01_C02B380_QPST.zip
Official Qualcomm QPST service archive for European Vodafone single-SIM devices.
⬇️ Download (2 links)
CAN-L11_Cannes-L11C530B360CUSTC530D001_Firmware_Android7.0_EMUI5.0.3_05014AQX.rar
Official European regional dload update package. BOM Code: 05014AQX.
⬇️ Download via Google DriveHuawei_Nova_CAN-L11_C09B330_Poland_QPST.zip
Qualcomm QPST factory service package for Poland carrier Dual-SIM CAN-L11 hardware.
⬇️ Download (2 links)
CAN-L01_Cannes-L01C738B130CUSTC738D002_Firmware_Slovenia_Nonspecific_Android6.0_EMUI4.1_05014DGP.rar
Official dload release for Slovenia regional single-SIM models. BOM Code: 05014DGP.
⬇️ Download via Google DriveHuawei_Nova_CAN-L13_C469B351_QPST.zip
Factory QPST archive for Latin American regional CAN-L13 variants.
⬇️ Download (2 links)
Huawei_Nova_CAN-L12_C409B140_Middle-East_Africa_240117_6.0_Dload.zip
Official dload package for Middle East and African CAN-L12 devices.
⬇️ Download via Google DriveSection 2: China Domestic Models (Huawei Nova Cannes — CAN-AL10, CAN-AL00, CAN-TL10, CAN-TL20) 5 packages
Huawei_Nova_CAN-AL10_C00B372_7.0_EMUI_5.0_05014DKQ_Board_Dload.zip
Official board-level dload recovery package for CAN-AL10 hardware. BOM Code: 05014DKQ.
⬇️ Download via Google DriveHuawei_Nova_Cannes-AL00_C00B368_China_05013XNL_Dload.zip
Full service-level dload package for China All-Netcom CAN-AL00. BOM Code: 05013XNL.
⬇️ Download (2 links)
Huawei_Nova_Cannes-TL10_C01B170_China_EMUI4.1_05013XNL_6.0_Dload.zip
Official China Mobile carrier dload archive. BOM Code: 05013XNL.
⬇️ Download via Google DriveHuawei_Nova_Cannes-TL20_C01B175_China_EMUI4.1_05014GPM_6.0_Dload.zip
Official dload package for China Mobile CAN-TL20 variant. BOM Code: 05014GPM.
⬇️ Download via Google DriveHuawei_Nova_Cannes-AL10_HL1CANAL10M001073_Board_Software_China_Nonspecific_Android_6.0_EMUI_4.1_05022BGC_HMT.zip
Low-level factory repair board software for unbricking CAN-AL10 via QPST/QFIL. BOM Code: 05022BGC.
⬇️ Download via Google DriveSection 3: China Domestic CAZ Platform (CAZ-AL10 & CAZ-TL10) 2 packages
Huawei_Nova_CAZ-AL10_C00B175_Board_Dload.zip
Board-level factory dload recovery package for CAZ-AL10 hardware.
⬇️ Download (2 links)
Huawei_Nova_CAZ-TL10_C01B175_China_EMUI4.1_05013YAB_6.0_Dload.zip
Official China Mobile carrier dload package for CAZ-TL10. BOM Code: 05013YAB.
⬇️ Download via Google DriveFlashing Overview for Huawei Nova
- Confirm your exact model (e.g. CAN-L01 vs CAN-AL10) from the SIM tray or fastboot
- Select the matching section above (European Global, China CAN, or Domestic CAZ)
- Format a microSD card to FAT32 MBR and create a root folder named dload
- Extract your downloaded package and place the UPDATE.APP file directly inside dload
- Power off phone, hold Vol+, Vol-, and Power together until EMUI update starts
Expand preparation checklist for Huawei Nova
- Check the exact model number (e.g. CAN-L01, CAN-L11, CAN-AL10) from the SIM tray or fastboot screen before downloading.
- Ensure the 3020mAh battery has at least 50% charge to prevent power loss during partition writes.
- For dload installation, format a microSD card to FAT32 MBR and copy the UPDATE.APP file into a folder named dload at the root directory.
- For low-level QPST/QFIL repair, connect the USB Type-C cable directly to a rear PC motherboard USB 2.0 port.
- Never erase modemst1, modemst2, or fsg partitions during raw partition flashing to avoid losing factory IMEI calibration.
Compatibility & Bootloader Notes
Standard dload updates run directly through EMUI stock recovery without requiring an unlocked bootloader. However, Huawei bootloader security enforces strict carrier Cust validation: attempting to install unbranded European C432 packages directly over Vodafone C02 or cross-flashing China C00 firmware will fail signature checks. For unbricking handsets with corrupted bootloaders, technicians use Qualcomm Emergency Download (EDL 9008) mode via motherboard testpoints with QPST or QFIL.
Ready to Flash This Firmware?
Full step-by-step instructions for Huawei Nova, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Huawei UPDATE.APP guide.
Can also be flashed via QFIL: Open QFIL Guide →
Frequently Asked Questions
Cannes (CAN) represents the original 5.0-inch Huawei Nova chassis with a 1080p display and 3020mAh battery. CAZ represents the 5.5-inch sibling variant (marketed domestically as the Huawei G9 Plus / Nova Plus). While both use the Qualcomm Snapdragon 625 (MSM8953) SoC, they have different display digitizer IC controllers, camera sensor pipelines (12MP on CAN vs 16MP OIS on CAZ), and motherboard physical layouts. Flashing CAZ software onto CAN boards causes display touch inversion or complete camera driver failures.
UPDATE.APP packages are official consumer and service containers intended for installation through stock EMUI recovery or eRecovery, requiring a working bootloader and functional kernel display. QPST packages contain raw partition binaries (rawprogram0.xml, patch0.xml, prog_emmc_firehose_8953.mbn) designed for Qualcomm Emergency Download (EDL 9008) mode. Technicians use QPST files when a handset has suffered a hard-brick, corrupted partition table, or damaged bootloader that prevents the phone from booting into the 3-button dload mode.
The MSM8953 baseband reads RF transceiver configurations and carrier band priority from the protected modem and oeminfo partitions. Huawei builds embed carrier calibration tables (Cust strings) like C02 (Vodafone Europe), C09 (Poland Plus), C469 (Latin America), and C00 (China All-Netcom). Flashing across regions without modifying the oeminfo partition will lead to "Cust mismatch" during stock dload verification or disabled LTE bands.
BOM (Bill of Materials) codes identify the exact hardware revision, display vendor panel (such as JDI or Tianma), and touch controller IC populated during factory assembly. In service environments, flashing a package with the matching BOM code ensures that the kernel loads the correct display timing parameters and touch digitizer firmware, preventing black screens or inverted touch coordinates upon initial boot.