Crucial Warning: Never flash a 3G-only package (Section 2) or China domestic build (Section 3) onto a European 4G LTE board (Section 1). Cross-flashing between single-SIM SCL-L01 (which features physical NFC circuitry) and dual-SIM SCL-L21 (which lacks NFC) will disable NFC and cause baseband radio mismatch.
Download Firmware for Huawei Y6 / Honor 4A
Section 1: European & Global 4G LTE Models (SCL-L01, SCL-L21, SCL-L02, SCL-L03, SCL-L04, SCL-L32) 9 packages
Huawei_Y6_SCL-L21_C432B150CUSTC432D002.zip
Official European open-market dload update package for dual-SIM SCL-L21.
⬇️ Download (2 links)
Huawei_Y6_SCL-L21_C900B050_Dload.zip
Official global general channel dload update for dual-SIM SCL-L21.
⬇️ Download via Google DriveHuawei_Y6_SCL-L21_C900B050_Board_Software_05021TVT_QPST.zip
Factory board-level QPST/QFIL repair package for dual-SIM SCL-L21. BOM Code: 05021TVT.
⬇️ Download via Google DriveHuawei_Y6_SCL-L01_(SCL-L01C432B181).zip
Official European open-market dload update package for single-SIM SCL-L01 with NFC.
⬇️ Download via AFHHuawei_Y6_SCL-L01_C900B057_Board_Software_Western_Europe_Nonspecific_05021TVQ_QPST.zip
Low-level factory QPST/QFIL repair package for single-SIM SCL-L01. BOM Code: 05021TVQ.
⬇️ Download via Google DriveHuawei_Y6_SCL-L02_(SCL-L02C900B130).zip
Official Asian global channel dload update for SCL-L02.
MD5: 001e5a93f34a08a0e807e981e78a7197
Huawei_Y6_SCL-L03_C469B130CUSTC110D001_Argentina_Dload.zip
Official Latin American regional dload package for SCL-L03 (Argentina channel).
⬇️ Download via MediaFireHuawei_Y6_SCL-L04_C654B130_22092015_Dload.zip
Official dload package for Canadian carrier models of SCL-L04.
⬇️ Download via Google DriveHuawei_Y6_SCL-L32_C627B150_24022017_Dload.zip
Official maintenance dload release for regional SCL-L32 hardware.
⬇️ Download via Google DriveSection 2: 3G-Only Hardware Platform (SCC-U21 & SCL-U31) 5 packages
Huawei_Y6_SCC-U21_(SCC-U21C900B150).zip
Official global channel dload release for 3G dual-SIM SCC-U21.
⬇️ Download via AFHHuawei_Y6_SCC-U21_(SCC-U21C900B140).zip
Factory dload release for 3G global dual-SIM SCC-U21 units.
⬇️ Download via AFHHuawei_Y6_SCC-U21_(SCC-U21C636B170).zip
Official Asia Pacific channel dload package for SCC-U21.
⬇️ Download via AFHHuawei.Y6.SCL-U31C900B130.5.1.1.qcom.9008.msm8909.7z
Low-level factory Qualcomm MSM8909 9008 unbrick archive for SCL-U31.
⬇️ Download via AFHHuawei_Y6_SCL-U31_MT6582_27082015_5.1.1.zip
Scatter package for aftermarket MediaTek MT6582-based replacement boards in Y6 shells.
⬇️ Download via MediaFireSection 3: China Domestic Channel / Honor 4A (SCL-AL00, SCL-CL00, SCL-TL00) 6 packages
Honor_4A_SCL-AL00_EMUI3.1-SCL-AL00-C00B106_MSM8909_5.1_dload.zip
Official China All-Netcom dload release for Honor 4A SCL-AL00.
⬇️ Download (2 links)
Huawei_Y6_SCL-AL00_C00B261_Firmware_China_Nonspecific_Android5.1_EMUI3.1_Dload.zip
Official updated China All-Netcom dload package for SCL-AL00.
⬇️ Download via Google DriveHuawei_SCL-TL00_SCL-TL00C01B261 (Glory 4A-Mobile High Edition)_China(China)_5.1.1.zip.rar
Official China Mobile Glory 4A carrier dload package.
⬇️ Download via AFHHonor_4A_SCL-TL00H_V100R001C00B251_China_5.1.1.zip
Official China Mobile High Edition dload update for SCL-TL00H.
⬇️ Download via Google DriveHuawei_SCL-TL10H_SCL-TL00HC00B262 (Glory 4A-Mobile High Edition)_5.1.1.zip.rar
Official China Mobile Glory 4A High Edition maintenance release.
⬇️ Download via AFHHonor_4A_SCL-CL00_C92B057_Board Software_China_Telecom_05021TPR_QFIL.zip
Low-level factory QPST/QFIL repair package for China Telecom SCL-CL00. BOM Code: 05021TPR.
⬇️ Download via Google DriveFlashing Overview for Huawei Y6 / Honor 4A
- Verify your exact model (e.g. SCL-L01 vs SCL-L21) from the sticker under the battery
- Select the matching section above (European 4G, 3G Platform, or China Domestic)
- Format a microSD card to FAT32 MBR and create a root directory named dload
- Extract your downloaded package and copy the UPDATE.APP file directly inside dload
- Power off phone, hold Vol+, Vol-, and Power together until EMUI update starts
Expand preparation checklist for Huawei Y6 / Honor 4A
- Check the exact model number (e.g. SCL-L01, SCL-L21, SCL-AL00) on the sticker under the removable battery before downloading.
- Ensure the 2200mAh battery has at least 50% charge to prevent unexpected power drops during flashing.
- For dload flashing, format a microSD card to FAT32 MBR and copy the UPDATE.APP file into a root folder named dload.
- For low-level QPST/QFIL unbricking, connect via an authentic microUSB cable directly to a rear PC motherboard USB 2.0 port.
- Never erase modemst1, modemst2, or fsg partitions during raw partition flashing to preserve factory RF calibration and IMEI certificates.
Compatibility & Bootloader Notes
Standard dload updates install directly through EMUI stock recovery without needing bootloader unlock codes. However, Huawei bootloader security verifies carrier Cust signatures (e.g. C432 Europe, C636 Asia, C00 China). Cross-flashing packages across incompatible regions via dload will be rejected at verification. For recovering dead or boot-looping phones with corrupted bootloaders, technicians force Qualcomm Emergency Download (EDL 9008) mode using motherboard testpoints with QFIL or QPST.
Ready to Flash This Firmware?
Full step-by-step instructions for Huawei Y6 / Honor 4A, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Huawei UPDATE.APP guide.
Can also be flashed via QFIL: Open QFIL Guide →
Frequently Asked Questions
The European SCL-L01 is a single-SIM hardware model with an integrated NFC controller and single-channel radio transceiver routing. The SCL-L21 is a dual-SIM hardware revision that features two SIM slots and an additional baseband modem configuration in the secure oeminfo partition. Flashing SCL-L21 firmware onto an SCL-L01 motherboard will not enable dual-SIM functionality, because the single-SIM board lacks the physical SIM 2 tray contacts and secondary IMEI certificate.
Genuine factory Huawei Y6 handsets are manufactured exclusively with the Qualcomm Snapdragon 210 (MSM8909) SoC. In certain regional repair markets, counterfeit handsets and unauthorized third-party board replacements utilizing older MediaTek MT6582 chipsets were produced inside replica Y6 chassis. Technicians must check Windows Device Manager during USB connection: a Qualcomm HS-USB QDLoader 9008 or Android ADB port confirms original hardware, while a MediaTek MTK VCOM port indicates an MT6582 clone board requiring SP Flash Tool.
Standard dload files are consumer UPDATE.APP archives intended for installation via EMUI recovery, which requires a functioning bootloader and undamaged partition tables. Factory board software packages contain raw partition images and XML programming scripts (rawprogram0.xml, patch0.xml, prog_emmc_firehose_8909.mbn) designed for low-level Qualcomm Emergency Download (EDL 9008) mode. Technicians use board software when a handset suffers from damaged boot partitions or is completely unresponsive.
BOM (Bill of Materials) codes identify the specific hardware revision and display panel IC controller configured during factory production. In service environments, flashing firmware that matches the original BOM code ensures the kernel loads the correct display driver and touch digitizer calibration, preventing blank screens or unaligned touch response following a reflash.