Crucial Warning: Check the model number printed on the back sticker or in your phone settings before you flash. Packages for R7f and R7c only work on Qualcomm models. Packages for R7t only work on MediaTek models. Never flash an R7t package onto an R7f or R7c phone, and never flash R7f/R7c packages onto an R7t phone.
Download Firmware for OPPO R7
R7fEX_11_A.11_160202.tar
Latest official stock update for international R7f models. Extract the TAR file to find the rawprogram0.xml and patch0.xml files.
⬇️ Download via MediaFireR7EX_11_A.11_160202.rar
The same A.11 international update in a compressed RAR archive. Works on all international Qualcomm R7f phones.
⬇️ Download via Direct LinkOppo_R7F_(R7fEX_11_A.08_150914).zip
Earlier official update for model R7f. Verified clean factory ZIP file with MD5 check.
⬇️ Download via AFHOppo_R7F_11_A.06_150803_QFIL.zip
Direct QFIL package for model R7f. Ready to load into Qualcomm Flash Image Loader.
⬇️ Download via Google DriveR7c_11_A.10_151207.rar
Official factory package for the China Telecom R7c model (Qualcomm Snapdragon 615). Includes CDMA network settings.
⬇️ Download via Google DriveR7t_11_B.02_151221.rar
Only for model R7t with MediaTek MT6752 chip. Flash with SP Flash Tool using the scatter file. Do not flash on R7f or R7c.
⬇️ Download via Google DriveFlashing Overview for OPPO R7
- Check your model number (R7f, R7c, or R7t) on the back sticker or in Settings
- For Qualcomm models (R7f, R7c): extract the firmware to get rawprogram0.xml and the programmer file
- Open QFIL on your PC, choose Flat Build, and load prog_emmc_firehose_8939.mbn and rawprogram0.xml
- For MediaTek R7t: open SP Flash Tool and select MT6752_Android_scatter.txt
- Turn off phone and connect via USB (hold Vol Up + Vol Down for Qualcomm; hold Vol Down for MediaTek)
- Click Download to start flashing and keep the phone connected until it finishes
Expand preparation checklist for OPPO R7
- Check the sticker on the back of your phone to confirm your exact model (R7f, R7c, or R7t).
- For Qualcomm models (R7f, R7c): install Qualcomm USB drivers and QFIL on your Windows PC.
- For MediaTek models (R7t): install MediaTek VCOM drivers and SP Flash Tool on your Windows PC.
- Charge the battery to at least 40% before you begin.
- Use a working microUSB cable and plug it into the back USB port of your computer.
- Back up your photos and important files because flashing will wipe all data on the phone.
Compatibility & Bootloader Notes
You do not need to unlock the bootloader to flash this phone. Qualcomm models flash through Emergency Download (EDL 9008) mode. MediaTek models flash through Preloader mode.
Ready to Flash This Firmware?
Full step-by-step instructions for OPPO R7, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's QFIL guide.
Can also be flashed via SP Flash Tool: Open SP Flash Tool Guide →
Frequently Asked Questions
No. The R7f uses a Qualcomm Snapdragon chip, while the R7t uses a MediaTek chip. Their internal systems and partition files are completely different. If you flash R7f software on an R7t, the phone will fail to turn on.
Turn off the phone completely. Press and hold both the Volume Up and Volume Down buttons together. While holding them, plug your USB cable into the computer. In Windows Device Manager, you should see "Qualcomm HS-USB QDLoader 9008".
This usually means the phone disconnected, the USB cable is loose, or you selected the wrong programmer file. Unplug the phone, hold the Power button for 10 seconds to shut it down, plug it into a rear USB port on your PC while holding Volume Up + Volume Down, and try again.
The R7t uses a MediaTek MT6752 processor. You must flash it using SP Flash Tool on a Windows PC using the scatter text file inside the firmware folder.