Crucial Warning: The BB4k platform uses two distinct motherboard revisions: H6114UVW for Global/regional models and H6114V for India. Cross-flashing between H6114UVW and H6114V can cause inverted touch controls or camera display failures. Always verify your current software build before downloading.
Official Firmware Packages for Tecno BB4k (H6114UVW & H6114V)
H6114UVW Board — Global & Regional Builds 3 packages
BB4k-H6114UVW-PGo-211026V137.zip
Latest official Global stock ROM for H6114UVW motherboards. Contains full MT6761 scatter files.
⬇️ Download via MediaFireBB4k-H6114UVW-PGo-200112V66.zip
Stable Global release for H6114UVW hardware with original factory security baseline.
⬇️ Download via MediaFireBB4k-H6114UVW-PGo-TR-191201V35.zip
Regional TR channel firmware for H6114UVW hardware revisions.
⬇️ Download via MediaFireH6114V Board — India Channel Builds 9 packages
BB4k-H6114V-PGo-IN-211103V94.zip
Latest official stock firmware for Tecno Spark Go Plus (BB4k) on H6114V Indian boards.
⬇️ Download via MediaFireBB4k-H6114V-PGo-IN-210901V92.zip
Official Indian release V92 for H6114V hardware with updated security patches.
⬇️ Download via MediaFireBB4k-H6114V-PGo-IN-210705V90.zip
Official Indian build V90 for H6114V boards. Flash via SP Flash Tool with Download Only.
⬇️ Download via MediaFireBB4k-H6114V-PGo-IN-210115V79.zip
Indian market firmware V79 for Spark Go Plus H6114V revisions.
⬇️ Download via MediaFireBB4k-H6114V-PGo-IN-200915V64.zip
Compact unbrick maintenance package for H6114V hardware targeting boot and system partitions.
⬇️ Download via MediaFireBB4k-H6114V-PGo-IN-200812V60.zip
Stable factory firmware V60 for Indian H6114V hardware models.
⬇️ Download via MediaFireBB4k-H6114V-PGo-IN-200526V55.zip
Official Indian release V55 for Tecno Spark Go Plus BB4k.
⬇️ Download via MediaFireBB4k-H6114V-PGo-IN-200414V48.zip
Official Indian release V48 for H6114V hardware boards.
⬇️ Download via MediaFireBB4k-H6114V-PGo-IN-191216V24.zip
Initial launch factory firmware V24 for Tecno Spark Go Plus in India.
⬇️ Download via MediaFireSP Flash Tool Restoration Roadmap for MediaTek MT6761
- Confirm Motherboard Revision (H6114UVW vs H6114V)
- Download Matched Scatter ROM Package
- Extract Archive and Launch SP Flash Tool
- Run MTK Auth Bypass & Connect in BROM Mode
- Click Download and Await Download OK Dialog
Pre-Flash Motherboard Verification & Environment Checks
- Check your device's motherboard revision (H6114UVW or H6114V) in Settings > System > About Phone before downloading.
- Unpack your downloaded .zip firmware archive with 7-Zip to reveal MT6761_Android_scatter.txt and the partition image files.
- Install signed 64-bit MediaTek MTK USB VCOM and Preloader drivers on your Windows computer.
- Always keep 'Download Only' highlighted in SP Flash Tool; never choose 'Format All + Download' to avoid wiping calibration data.
- Ensure the 4,000 mAh battery has at least 40% charge and use a quality microUSB 2.0 cable connected to a rear motherboard USB port.
H6114UVW vs H6114V Board Revision & Channel Demarcation
Flashing the MediaTek Helio A22 (MT6761) board requires holding Volume Down while connecting USB in BROM mode. Secure Boot SLA/DAA authentication may require MTK Auth Bypass utility.
Ready to Flash This Firmware?
Full step-by-step instructions for Tecno Spark 4 Lite / Spark Go Plus, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's SP Flash Tool guide.
Can also be flashed via MTKClient: Open MTKClient Guide →
Hardware Taxonomy & Transsion Build Architecture Q&A
The Tecno Spark 4 Lite and Tecno Spark Go Plus are regional marketing names for the exact same Transsion hardware platform, identified internally by model number BB4k. Both share the MediaTek Helio A22 MT6761 processor, 6.52-inch HD+ display, 2 GB RAM, 32 GB storage, and a 4,000 mAh battery. The device was launched as Spark Go Plus in India and as Spark 4 Lite in international and African markets.
H6114UVW is the board configuration designed for Global and regional European/Turkish distribution, while H6114V is dedicated to the Indian market. While both use the MT6761 chipset, they utilize different RF transceiver calibrations for local LTE frequency bands and alternate touch digitizer drivers. Flashing an H6114V ROM on an H6114UVW board can disrupt cellular reception or invert touchscreen touch coordinates.
Build BB4k-H6114V-PGo-IN-200915V64.zip is a specialized maintenance build packaged without the heavy user partition data or vendor media bundles found in full 1.15 GB+ factory dumps. It targets system and boot recovery partitions directly, making it suitable for unbricking bootloops without transferring uncompressed user partition payloads.