Crucial Warning: Do not cross-flash packages intended for monet (Mi 10 Lite 5G) onto this vangogh device. Attempting to install monet software will disable or crash the periscope camera subsystem and can lead to bootloops. When using Mi Flash Tool with stock China ROMs, always choose clean all (flash_all.bat). Do not select clean all and lock if your phone was imported and you plan to run custom or multilingual ROMs, as locking the bootloader with non-stock software trips cryptographic integrity checks and bricks the recovery partition.
Xiaomi Mi 10 Lite Zoom (vangogh) Firmware Packages
vangogh_images_V13.0.9.0.SJVCNXM_20221102.0000.00_12.0_cn_2a6eaf2737.tgz
Official final China stable Fastboot package for Mi 10 Youth 5G M2002J9E. Decompress twice with 7-Zip and flash via Mi Flash Tool with "clean all".
MD5: 2a6eaf2737c8a3256e7cdb35b3d74e5b
xiaomi.eu_multi_MI10LiteZoom_V13.0.9.0.SJVCNXM_v13-12-fastboot.zip
Multilingual community release based on China stable V13.0.9.0. Includes Google Play services and automated fastboot installation scripts.
⬇️ Download via MIUI OTATWRP-3.4.2B-0625-XIAOMI10LITE-CN-wzsx150-fastboot.zip
Custom recovery toolkit compiled by wzsx150 for Mi 10 Youth / Lite Zoom. Includes fastboot batch script and Android storage decryption support.
MD5: 2ca64e63be466f261ce8c610111ca3fd
Restoration Overview for Xiaomi Mi 10 Lite Zoom
- Verify vangogh hardware identity and model code M2002J9E in bootloader
- Extract fastboot archive using 7-Zip to a short unspaced folder path
- Boot into Fastboot mode by holding Volume Down and Power buttons
- Connect phone via authentic USB-C cable to a rear motherboard USB port
- Execute flashing script with clean all to write partitions and reboot
Hardware Safety & Motherboard Pre-Flash Triage
- Verify the exact model number M2002J9E in Fastboot mode using the command fastboot getvar product to confirm the vangogh board identity.
- Check the hardware anti-rollback index by executing fastboot getvar anti before attempting any build downgrades.
- Ensure the 4160mAh internal battery holds at least 50% charge to prevent abrupt shutdowns during partition writing over USB-C.
- Use 7-Zip to extract the official fastboot package vangogh_images_V13.0.9.0.SJVCNXM_20221102.0000.00_12.0_cn_2a6eaf2737.tgz twice into a short directory path such as C:vangogh.
- Connect your USB data cable directly to a rear motherboard USB 2.0 port on the host PC to prevent controller timeouts.
- If the handset suffers a hard brick where Fastboot is unreachable, emergency recovery requires shorting the EDL 9008 test points located near the periscope camera assembly underneath the rear glass panel.
Hardware Variant & Periscope Camera Compatibility
An officially unlocked bootloader via the official Xiaomi Mi Unlock utility is mandatory before executing Mi Flash fastboot scripts or booting custom recovery images. Devices with locked bootloaders will reject flashing commands.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi Mi 10 Lite Zoom / Mi 10 Youth 5G (vangogh), including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via TWRP Install: Open TWRP Install Guide →
Hardware Architecture & Archival Build Questions
While both models share the Qualcomm Snapdragon 765G chipset and a 6.57-inch AMOLED display, the vangogh motherboard (M2002J9E) incorporates an 8MP periscope telephoto sensor with 5x optical zoom, 50x digital zoom, and dedicated OIS actuators. The monet board (M2002J9G) omits periscope hardware entirely, utilizing a standard macro and depth sensor layout. Because of these distinct ISP and driver configurations, camera partitions and vendor HAL modules cannot be swapped across codenames.
The device uses dual-channel LPDDR4X RAM paired with dual-lane UFS 2.1 flash storage. Storage variants include 64GB, 128GB, and 256GB capacities. When flashing via Fastboot, the partition table configures raw dynamic storage chunks that rely on UFS 2.1 high-speed read/write performance.
Xiaomi commercially released the periscope-equipped M2002J9E exclusively in mainland China as the Mi 10 Youth 5G. Although global marketing materials originally referenced a Mi 10 Lite Zoom, no official Global (MIXM) or European (EUXM) stock firmware branch was ever published by Xiaomi for the vangogh codename. Users outside China utilize the community-maintained xiaomi.eu multilingual ROM, which adapts the China stable firmware with Google Mobile Services.
The wzsx150 TWRP archive provides a specialized custom recovery environment capable of decrypting Android file-based encryption (FBE) on the Snapdragon 765G platform. Stock Mi-Recovery only allows official signed package updates and data wipes; wzsx150 TWRP allows custom ROM installations, direct partition image flashing, and persistent storage management without tripping forced encryption locks.