Crucial Warning: Hardware & Camera ISP Distinction: The Mi 10 Ultra (cas) features an exclusive quad-camera subsystem (custom 48 MP OmniVision OV48C primary sensor, 48 MP Sony IMX586 5x optical / 120x periscope telephoto, 12 MP portrait, and 20 MP ultra-wide) alongside a 120W dual-charge pump charging controller. Never attempt to flash firmware intended for the standard Mi 10 (umi) or Mi 10 Pro (cmi), as doing so breaks camera sensor initialization and brick charging power delivery tables.
Official Xiaomi Mi 10 Ultra Stock Firmware Downloads
Official Stock Fastboot & Recovery Firmware (China) 2 packages
cas_images_OS1.0.4.0.TJJCNXM_20240605.0000.00_13.0_cn_628f989f7d.tgz
Official factory Fastboot TGZ package for unbricking and restoring stock HyperOS 1.0. Always select clean all (flash_all.bat).
MD5: 628f989f7d9bfbcd92940dba966d0bdf
miui_CAS_OS1.0.4.0.TJJCNXM_40f432b58e_13.0.zip
Official stock Recovery update package. Flash via official recovery menu or local update on unmodified devices.
MD5: 40f432b58ee32348ad1748f1c417c621
Community Multilingual Custom ROMs (Xiaomi.eu) 1 package
xiaomi.eu_CAS_OS1.0.4.0.TJJCNXM_13.zip
Community multilingual custom ROM with integrated Google Play Services, European translations, and debloated China apps. Requires unlocked bootloader and TWRP.
MD5: 724141b178f22b1b0c36790b9e6a3eb2
Custom Recovery Images & Toolkits (TWRP by skkk) 2 packages
twrp-3.7.1_12-v9.0_A15_FBEv2-cas-skkk.img
Updated TWRP recovery image compiled by skkk with FBEv2 decryption support for Android 13 HyperOS and Android 14/15 custom ROMs.
MD5: 751c1abd1a8ee9dbddcc7dffcf83c81b
[REC_BOOT]3.7.0_12-Mi10Ultra_v7.8_A13-cas-skkk_abd8e1ba.zip
One-click Fastboot batch installer package by skkk for temporarily booting or flashing TWRP 3.7.0 on Android 13 HyperOS firmware.
MD5: abd8e1ba23c669732c97e148e99ed581
5-Step Fastboot & Mi Flash Restoration Walkthrough for cas
- Download and decompress cas_images_OS1.0.4.0.TJJCNXM_20240605.0000.00_13.0_cn_628f989f7d.tgz twice using 7-Zip to C:\cas_fw
- Power off the phone completely, then hold Volume Down and Power buttons together until the orange FASTBOOT graphic displays
- Connect via USB 2.0 cable and verify terminal communication using the command "fastboot devices"
- Open Xiaomi Mi Flash Tool, select the extracted firmware directory, and strictly verify "clean all" is checked at the bottom right
- Click Flash to write partition images to UFS 3.1 storage and allow 5 to 8 minutes for the initial HyperOS cache initialization
Pre-Flash Hardware Checks, Anti-Rollback & Board Verification
- 1. Verify your model number in Settings > About Phone or on the rear casing (M2007J1SC).
- 2. Decompress your target Fastboot archive (such as cas_images_OS1.0.4.0.TJJCNXM_20240605.0000.00_13.0_cn_628f989f7d.tgz) twice using 7-Zip directly into a short root path such as C:cas_fw without spaces in directory names.
- 3. Check your anti-rollback protection index before downgrading by connecting the phone in Fastboot mode and executing the command "fastboot getvar anti".
- 4. Ensure the dual-cell 4500 mAh battery retains at least 50% charge before flashing to avoid power cuts while writing large dynamic super partition images.
- 5. In severe unbrick scenarios where the bootloader cannot reach Fastboot mode, hardware EDL test points are located on the mainboard beneath the rear camera module and graphite heat dissipation film.
- 6. Connect the phone directly to a native motherboard USB 2.0 port with an authentic data sync cable to prevent packet loss during the 5GB+ flashing process.
Snapdragon 865 Board Architecture & Camera ISP Calibration
Flashing Fastboot packages or custom recoveries requires an officially unlocked bootloader via the Xiaomi Mi Unlock utility. Because the Mi 10 Ultra was manufactured exclusively under model code M2007J1SC for China, never lock the bootloader using flash_all_lock.bat when running custom multilingual software such as Xiaomi.eu, as mismatched security signatures will trigger an immediate hard brick.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi Mi 10 Ultra, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via Fastboot: Open Fastboot Guide →
Technical Questions & Archival Notes for the cas Firmware Tree
The Xiaomi Mi 10 Ultra utilizes Google's dynamic partition architecture implemented on a non-A/B (A-only) System-as-Root (SAR) layout. Sub-partitions like system, vendor, and product are grouped inside a unified dynamic "super" container. Unlike newer Virtual A/B smartphones where recovery is integrated into the boot ramdisk, the Mi 10 Ultra maintains a dedicated physical recovery partition. This enables users to flash custom recovery binaries directly using "fastboot flash recovery recovery.img" or boot them temporarily with "fastboot boot recovery.img" without altering boot images.
The Mi 10 Ultra was developed as a limited 10th-anniversary commemorative device sold exclusively in Mainland China under model code M2007J1SC. Because Xiaomi never launched the phone commercially in international markets, official Global or EEA firmware was never compiled. To provide multilingual support, debloated system components, and Google Play Services, the independent community project Xiaomi.eu maintains dedicated European custom ROM builds built on the official Chinese HyperOS and MIUI releases.
The difference relates to Android's File-Based Encryption (FBE) implementation across different OS generations. Earlier Android 11 and 12 MIUI builds utilized standard FBE key derivation, whereas Android 13 HyperOS updates and newer Android 14/15 custom ROMs transitioned to FBEv2. Attempting to use an older non-FBEv2 TWRP image on an FBEv2 system causes the recovery to reject valid lockscreen credentials and fail to decrypt /data. Flashing twrp-3.7.1_12-v9.0_A15_FBEv2-cas-skkk.img ensures proper decryption support.
The Mi 10 Ultra enforces anti-rollback protection via hardware fuses managed by the bootloader. Before attempting to downgrade from HyperOS 1.0 (such as OS1.0.4.0.TJJCNXM) to older MIUI 12 or 12.5 packages, verify the current device ARB index by booting into Fastboot mode and executing "fastboot getvar anti". If the returned index matches or is lower than the target package's anti-rollback value, the flash is safe; flashing a package with a lower anti-rollback value will trigger a hard brick.