Crucial Warning: Dual-Display & In-House ISP Hardware Architecture: The Mi MIX Fold integrates an 8.01-inch flexible inner display paired with an external 6.52-inch cover panel, alongside Xiaomi's custom Surge C1 image signal processor handling the liquid lens camera subsystem. Never flash firmware packages compiled for standard slate flagships (such as the Mi 11 or Mi 11 Ultra), as doing so breaks dual-screen display switching and permanently disables camera ISP calibration tables.
Official Xiaomi Mi MIX Fold Stock Firmware Downloads
Official Stock Fastboot & Recovery Firmware (China) 3 packages
cetus_images_OS1.0.8.0.TJTCNXM_20250929.0000.00_13.0_cn_e765c66aa2.tgz
Latest official factory Fastboot TGZ package for unbricking and restoring stock HyperOS 1.0. Flash via Mi Flash Tool with clean all (flash_all.bat) selected.
MD5: e765c66aa248a9332b91e80ce959ce2c
miui_CETUS_OS1.0.8.0.TJTCNXM_b73cff445f_13.0.zip
Official stock Recovery update package. Install via stock recovery menu or the on-device system updater on unmodified devices.
MD5: b73cff445f25d1730c685c409d88a319
cetus_images_OS1.0.1.0.TJTCNXM_20240201.0000.00_13.0_cn_aea3816cf1.tgz
Initial stable HyperOS 1.0 factory Fastboot package. Use for archival reference or clean restoration to the baseline HyperOS release.
MD5: aea3816cf16a3c94d93708bb8742bca4
5-Step Fastboot & Mi Flash Restoration Walkthrough for cetus
- Download and decompress cetus_images_OS1.0.8.0.TJTCNXM_20250929.0000.00_13.0_cn_e765c66aa2.tgz twice using 7-Zip to C:\cetus_fw
- Fold the phone shut, power it off completely, and hold Volume Down and Power buttons together until the FASTBOOT logo appears on the cover screen
- Connect via USB 2.0 data cable to your PC and verify terminal communication by executing "fastboot devices"
- Open Xiaomi Mi Flash Tool, browse to the extracted firmware folder, and strictly ensure "clean all" (flash_all.bat) is checked at the bottom right
- Click Flash to write partition images to UFS 3.1 storage and allow 5 to 8 minutes for the initial HyperOS system setup and reboot
Pre-Flash Hardware Checks, Foldable Safety & Anti-Rollback Verification
- 1. Check your hardware model number on the rear casing or under Settings > About Phone to confirm it matches M2011J18C.
- 2. Decompress your target Fastboot package (such as cetus_images_OS1.0.8.0.TJTCNXM_20250929.0000.00_13.0_cn_e765c66aa2.tgz) twice using 7-Zip directly into a clean root folder like C:cetus_fw without spaces in directory paths.
- 3. Check your anti-rollback protection value before downgrading by connecting the phone in Fastboot mode and executing the command "fastboot getvar anti".
- 4. Fold the phone shut during flashing so the flexible inner screen is fully protected from physical pressure, and observe Fastboot connection prompts on the external 6.52-inch cover display.
- 5. Ensure the dual-cell 5020 mAh battery retains at least 50% charge to prevent sudden power loss while writing the large 5GB+ dynamic super partition container.
- 6. Connect the phone directly to a native motherboard USB 2.0 port on your computer using an authentic Type-C data sync cable to prevent data transfer timeouts during installation.
Snapdragon 888 Thermal Management & Dual-Screen Fastboot Protocol
Flashing Fastboot packages requires an officially unlocked bootloader via the Xiaomi Mi Unlock desktop utility. Because the Mi MIX Fold was produced exclusively under model code M2011J18C for the Chinese market, always verify that "clean all" (flash_all.bat) is selected in Mi Flash Tool. Never select "clean all and lock" (flash_all_lock.bat) when flashing system images or modified files, as mismatched signature checks on Chinese hardware will cause an immediate hard brick.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi Mi MIX Fold, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via Fastboot: Open Fastboot Guide →
Technical Questions & Archival Notes for the cetus Firmware Tree
The Xiaomi.eu development team maintains an explicit policy excluding foldable and flip devices from their regular custom ROM release schedule. Foldable phones like the Mi MIX Fold require specialized proprietary display management frameworks, dual-screen density scaling drivers, and custom MIUI Fold desktop PC Mode services that are not open-sourced or easily ported across international language bases. As a result, cetus owners rely on official Chinese HyperOS releases with sideloaded Google Play Services rather than custom multilingual community builds.
The Xiaomi Mi MIX Fold utilizes Google's dynamic partition architecture implemented on a non-A/B System-as-Root layout. Sub-partitions including system, vendor, product, odm, and system_ext are packaged within a single dynamic "super" container exceeding 5GB in size. During Fastboot flashing via flash_all.bat, the flashing utility splits this container into sparse chunk files (super.1, super.2, etc.). Using unpowered USB hubs or front-panel USB 3.0 ports can cause write timeouts during this phase; always connect directly to a rear motherboard USB 2.0 port.
The Mi MIX Fold enforces hardware-level anti-rollback protection via electronic fuses managed by the bootloader. If you attempt to flash an older firmware build (such as early MIUI 12 Android 11 releases) with a lower anti-rollback index than your device's current fused index, the bootloader will reject the image or trigger a hard brick. Always verify your current index by booting into Fastboot mode and running "fastboot getvar anti" before flashing older packages.
The persist partition on the Mi MIX Fold stores unique factory calibration data for the custom Surge C1 ISP, the 8 MP liquid lens motor actuators, the 108 MP main camera sensor, and the dual optical image stabilization (OIS) gyroscopes. If the persist partition is erased or overwritten during flashing, the camera application will fail to initialize or produce severe focus hunting and stabilization errors. Official flash scripts like flash_all.bat intentionally omit persist to safeguard this critical sensor data.