Crucial Warning: Always verify your hardware codename is tucana before flashing. Never flash firmware built for the Mi Note 10 Lite (codename toco), as toco uses a distinct 64 MP Sony IMX686 camera sub-board, altered display drivers, and a different partition scheme that will cause hard boot failure.
Xiaomi Mi Note 10 Series Stock Firmware & Recovery Packages
Official European (EEA) Firmware Releases 2 packages
tucana_eea_global_images_V13.0.2.0.RFDEUXM_20220903.0000.00_11.0_eea_74d3f99bd8.tgz
Official European Fastboot factory package. Recommended for clean unbrick and UK/EU carrier restorations.
MD5: 74d3f99bd8ad81f0fc4abde2909d02ba
miui_TUCANAEEAGlobal_V13.0.2.0.RFDEUXM_4c2cbbe0bf_11.0.zip
Official European Recovery update package. Installable through MIUI System Updater or stock recovery menu.
MD5: 4c2cbbe0bf22653a85bc29f44d109cf9
Official Global Firmware Releases 2 packages
tucana_global_images_V13.0.2.0.RFDMIXM_20220908.0000.00_11.0_global_feef0e8faf.tgz
Official Global Fastboot package with Google Mobile Services (GMS) for worldwide retail devices.
MD5: feef0e8faf004f5aa3bd9b0f7c4a65be
miui_TUCANAGlobal_V13.0.2.0.RFDMIXM_30046080e8_11.0.zip
Official Global Recovery update package for on-device flashing via system updater or recovery.
MD5: 30046080e8da43e7fa83005464f3e3b7
Official Regional Firmware Releases (China, Russia, Indonesia) 6 packages
tucana_images_V13.0.4.0.RFDCNXM_20220825.0000.00_11.0_cn_0e8c6416d9.tgz
Official China Fastboot factory package for Mi CC9 Pro and CC9 Pro Premium Edition.
MD5: 0e8c6416d9e0ee3b852cf6d7633a3be0
miui_TUCANA_V13.0.4.0.RFDCNXM_9253c83a9f_11.0.zip
Official China Recovery update package for on-device flashing on Chinese domestic models.
MD5: 9253c83a9f39f163485ab8b50df4dc12
tucana_ru_global_images_V13.0.3.0.RFDRUXM_20220915.0000.00_11.0_global_becf63a4a6.tgz
Official Russian regional Fastboot package with localized apps and regional network configurations.
MD5: becf63a4a6037930c5358bd5043618f3
miui_TUCANARUGlobal_V13.0.3.0.RFDRUXM_9813613bb0_11.0.zip
Official Russian regional Recovery update package for on-device flashing.
MD5: 9813613bb0217f56797e85f58456a18d
tucana_id_global_images_V13.0.3.0.RFDIDXM_20220908.0000.00_11.0_global_4cc83adb5b.tgz
Official Indonesian regional Fastboot package with stock MIUI dialer and local network profiles.
MD5: 4cc83adb5bcad3b942be8a6d24dc69b5
miui_TUCANAIDGlobal_V13.0.3.0.RFDIDXM_66641e2af4_11.0.zip
Official Indonesian regional Recovery update package for on-device installation.
MD5: 66641e2af47d87d7b9c194165688eee7
Official Xiaomi.eu Multilingual Community ROM 1 package
xiaomi.eu_multi_MINote10_MICC9Pro_V13.0.4.0.RFDCNXM_v13-11.zip
Official Xiaomi.eu stable release derived from China Stable. Features European multilingual translations, integrated GMS, native MIUI dialer with call recording, and 108 MP camera tuning.
MD5: b92dc0194b7fe8d39f5cb1e70dc2dd36
Custom Recovery Implementations (TWRP & OrangeFox) 4 packages
twrp-3.7.0_9-0-tucana.img
Official TeamWin recovery image for tucana. Direct installation to dedicated physical recovery partition via fastboot flash recovery.
MD5: e6e8f8d1c9e90087a70670c61ecd17ab
⬇️ Download (2 links)
OrangeFox-R12.0_1_Retrofit-Unofficial-tucana.zip
Designed specifically for newer custom ROMs (Android 12/13/14) that repartition physical blocks into a retrofitted logical super partition.
MD5: 52c1f7b71eb70c619ff2c887c34097e0
OrangeFox-R12.0_1_-Unofficial-tucana.zip
Standard non-dynamic layout build. Recommended for official MIUI 11, 12, 12.5, and 13 stock firmwares and classic custom ROMs.
MD5: b7f2156e1066aa35e4c4453ec33ecfa2
OrangeFox-R11.1_3-Unofficial-tucana.zip
Stable legacy OrangeFox release tailored for Android 10 and Android 11 MIUI 12.5 installations.
MD5: 9dc2e142d08e25fc98bb24f9dffcd308
Fastboot Restoration & Unbrick Walkthrough for tucana
- Verify board codename tucana via fastboot getvar product to prevent cross-flashing with toco
- Inspect hardware anti-rollback status with fastboot getvar anti before initiating downgrades
- Unpack Fastboot TGZ archive twice using 7-Zip until flash_all.bat and images folder appear
- Select clean all in Mi Flash Tool to write partitions without re-locking bootloader
- Allow 5 to 10 minutes on initial startup while File-Based Encryption initializes
Pre-Flash Hardware Verification & Partition Safety
- 1. Verify device codename in Fastboot mode by executing 'fastboot getvar product' (must report 'tucana') to eliminate cross-flashing with the Mi Note 10 Lite (toco).
- 2. Run 'fastboot getvar anti' to inspect your hardware anti-rollback (ARB) fuse before attempting any Android 11 to Android 9 downgrades.
- 3. Back up internal storage via USB-OTG or PC, as flashing official Fastboot images with 'flash_all.bat' reformats UFS 2.1 partitions and deletes all user files.
- 4. Install Qualcomm USB QDLoader drivers and Xiaomi Mi Flash Tool on a 64-bit Windows PC, and connect directly to a rear USB 2.0 motherboard socket.
- 5. Unpack tucana_eea_global_images_V13.0.2.0.RFDEUXM_20220903.0000.00_11.0_eea_74d3f99bd8.tgz twice using 7-Zip to reveal flash_all.bat and the images directory.
- 6. Ensure the 5260mAh internal battery holds at least 50% charge to maintain steady supply voltage throughout the partition writing routine.
Camera Hardware Architecture & Codename Separation
Official Mi Unlock authorization is required before flashing Fastboot TGZ packages or custom recoveries. Handsets with a locked bootloader must remain on matching official regional branches.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi Mi Note 10 / Mi Note 10 Pro / Mi CC9 Pro, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via OrangeFox Custom Recovery: Open OrangeFox Custom Recovery Guide →
Xiaomi Mi Note 10 Platform & Hardware Archive FAQ
All three models share the exact same Qualcomm Snapdragon 730G motherboard and firmware binaries. The standard Global Mi Note 10 (M1910F4G) features 6GB of LPDDR4X RAM, 128GB of UFS 2.1 storage, and a 7P lens assembly on the primary 108 MP sensor. The Global Mi Note 10 Pro (M1910F4S) upgrades the configuration to 8GB of RAM, 256GB of storage, and an 8P lens element for enhanced edge sharpness. The Chinese domestic Mi CC9 Pro (M1910F4E) shares the physical architecture but lacks European LTE Band 20 in its baseband RF front-end filters.
The Xiaomi Mi Note 10 series utilizes a traditional non-A/B (A-only) System-as-Root (SAR) partition scheme on UFS 2.1 storage. Unlike modern Android smartphones using Virtual A/B that eliminate the physical recovery partition, tucana includes a dedicated hardware recovery partition (/dev/block/bootdevice/by-name/recovery). This architecture allows users to flash custom recoveries directly with fastboot flash recovery without modifying or repacking the primary boot partition image.
Factory MIUI 11, 12, and 13 stock firmware on tucana utilizes discrete physical partitions for system, vendor, and cust. OrangeFox R12.0_1 Standard is engineered for this classic non-dynamic partition map. In contrast, modern custom ROMs based on Android 13 and 14 repartition these discrete blocks into a single logical super partition. The OrangeFox Retrofit build incorporates a specialized dynamic partition mapper required to mount, wipe, and flash these retrofitted logical partitions.
Xiaomi implements Qualcomm Anti-Rollback (ARB) hardware fuse protection within the TrustZone boot architecture. Running the command fastboot getvar anti reports your current hardware fuse value. If you attempt to flash older firmware with an anti-rollback index lower than the fuse currently blown into the processor TrustZone, the primary bootloader halts execution, resulting in an unrecoverable hard brick requiring authorized EDL service flashing.