Crucial Warning: When flashing Fastboot packages via Mi Flash Tool on imported or cross-regional hardware, always ensure that "clean all" (flash_all.bat) is selected at the bottom right. Never select "clean all and lock" (flash_all_lock.bat). Relocking the bootloader on hardware running cross-regional software (e.g. European/Global software on a Chinese 21051182C tablet) will trigger an immediate boot freeze with the error "This MIUI version can't be installed on this device", requiring authorized EDL recovery.
Download Xiaomi Pad 5 (nabu) Stock Firmware ROM
EEA & Global Official HyperOS Packages (Android 13.0) 4 packages
nabu_eea_global_images_OS1.0.6.0.TKXEUXM_20240914.0000.00_13.0_eea_dd27c36677.tgz
Official EEA European factory Fastboot package based on Android 13.0 HyperOS. Requires unlocked bootloader.
MD5: dd27c366778a5a305a2170af3551f428
miui_NABUEEAGlobal_OS1.0.6.0.TKXEUXM_d2d151c706_13.0.zip
Official EEA European Recovery OTA update package. Supports local update or Mi Assistant sideload on locked bootloaders.
MD5: d2d151c706af84deeef54ab08f279e42
nabu_global_images_OS1.0.6.0.TKXMIXM_20240914.0000.00_13.0_global_3693ddb728.tgz
Official International Global factory Fastboot package based on Android 13.0 HyperOS. Requires unlocked bootloader.
MD5: 3693ddb7288eae1603bb5c33023e34c2
miui_NABUGlobal_OS1.0.6.0.TKXMIXM_4af37553d5_13.0.zip
Official International Global Recovery OTA package. Sideload via stock Mi Assistant or flash through custom recovery.
MD5: 4af37553d549a89706b562558da81874
Regional Official HyperOS Packages (India, China, Russia, Turkey, Taiwan) 10 packages
nabu_in_global_images_OS1.0.17.0.TKXINXM_20250225.0000.00_13.0_in_3ea6bd51e5.tgz
Official India regional Fastboot package featuring updated 2025 security patch level. Requires unlocked bootloader.
MD5: 3ea6bd51e58315243428d8dd76c9e77f
miui_NABUINGlobal_OS1.0.17.0.TKXINXM_e2a8888f1c_13.0.zip
Official India regional Recovery OTA update package for local install or Mi Assistant recovery restoration.
MD5: e2a8888f1cafaa398aa167282edae34f
nabu_images_OS1.0.3.0.TKXCNXM_20240516.0000.00_13.0_cn_ff15a7adfc.tgz
Official China domestic Fastboot image for model 21051182C. Critical for restoring soft-bricked Chinese retail units.
MD5: ff15a7adfc55be0a38b5c7862ccb23a4
miui_NABU_OS1.0.3.0.TKXCNXM_b4170b92e5_13.0.zip
Official China domestic Recovery OTA package. Can be installed via Mi Assistant on Chinese locked units.
MD5: b4170b92e554ece5fd4c4396f89f24b4
nabu_ru_global_images_OS1.0.5.0.TKXRUXM_20240918.0000.00_13.0_ru_78607a4d6e.tgz
Official Russia regional Fastboot image based on Android 13.0 HyperOS. Requires unlocked bootloader.
MD5: 78607a4d6ec77e210b6cfd051d66a290
miui_NABURUGlobal_OS1.0.5.0.TKXRUXM_8ff8a80846_13.0.zip
Official Russia regional Recovery OTA package for local system updates or Mi Assistant recovery restoration.
MD5: 8ff8a80846b0260d10e212263181ccc7
nabu_tr_global_images_OS1.0.6.0.TKXTRXM_20240914.0000.00_13.0_tr_77140b54fd.tgz
Official Turkey regional Fastboot image based on Android 13.0 HyperOS. Requires unlocked bootloader.
MD5: 77140b54fdcda33a8b46e8deac90a417
miui_NABUTRGlobal_OS1.0.6.0.TKXTRXM_dba0e3b5e7_13.0.zip
Official Turkey regional Recovery OTA package for local system updates or Mi Assistant recovery restoration.
MD5: dba0e3b5e7599aef543da5bdf76b4f72
nabu_tw_global_images_OS1.0.6.0.TKXTWXM_20240914.0000.00_13.0_tw_17785c64d3.tgz
Official Taiwan regional Fastboot image based on Android 13.0 HyperOS. Requires unlocked bootloader.
MD5: 17785c64d3b632970612ae5f4556790b
miui_NABUTWGlobal_OS1.0.6.0.TKXTWXM_23eaa511ec_13.0.zip
Official Taiwan regional Recovery OTA package for local system updates or Mi Assistant recovery restoration.
MD5: 23eaa511ec081a17f5891def7b1958a1
Custom Recovery & Kernel Ramdisk Images (OrangeFox, TWRP, PBRP) 5 packages
OrangeFox-R12.0-Unofficial-nabu.img
Bootable custom recovery kernel ramdisk image. Boot via "fastboot boot OrangeFox-R12.0-Unofficial-nabu.img" on unlocked bootloader.
MD5: c8d451a44e99f018e6928e469b841a12
OrangeFox-R12.0-Unofficial-nabu.zip
Persistent recovery installer ZIP. Install from booted temporary TWRP or OrangeFox environment to preserve recovery across reboots.
MD5: fa2841dc33e85bb2198031dcf7769411
twrp-3.7.1_12-0-nabu-Siddk.img
TWRP recovery image maintained by Siddk. Supports Android 12 and 13 decryption and dynamic partition backups.
MD5: 17e99ff632b8004f21d37a34e56598c1
PBRP-nabu-4.0-20241222-2341-UNOFFICIAL.zip
PitchBlack Recovery Project flashable installer ZIP for Android 12 and 13 custom ROMs.
MD5: b72350cc624021e5496f8742813134ea
OrangeFox-R11.3-Unofficial-nabu.zip
Legacy OrangeFox recovery installer ZIP for earlier MIUI 12.5 and MIUI 13 releases based on Android 11/12.
MD5: ef3841ad02e96e51633519198aa7d934
5-Step Xiaomi Pad 5 Stock Firmware Restoration
- Unlock bootloader through Xiaomi Community authorization or prepare stock Mi Assistant for locked devices
- Extract nabu_eea_global_images_OS1.0.6.0.TKXEUXM_20240914.0000.00_13.0_eea_dd27c36677.tgz twice with 7-Zip to C:\nabu_fw\
- Hold Volume Down and Power together on the Pad 5 until the orange FASTBOOT graphic appears
- Launch Mi Flash Tool, select C:\nabu_fw\, and ensure "clean all" (flash_all.bat) is checked at the bottom right
- Click Flash and leave the USB cable connected until the status shows success and the tablet restarts
Pre-Flash Hardware Checks & Driver Setup for Pad 5
- Confirm your tablet model (21051182G for Global, 21051182C for China) and codename (nabu) by booting Fastboot mode and running "fastboot getvar product".
- Check your current anti-rollback index using "fastboot getvar anti" to ensure you do not attempt to flash older builds below your active security baseline.
- Ensure the 8,720 mAh battery holds at least 50% charge. If the tablet was idle for months and refuses to boot, slow-charge on a standard 5V/1A USB port for 30 minutes to revive the battery management circuit.
- Extract nabu_eea_global_images_OS1.0.6.0.TKXEUXM_20240914.0000.00_13.0_eea_dd27c36677.tgz twice using 7-Zip directly to a short path such as C:nabu_fw to prevent path length errors in Mi Flash.
- Because nabu uses a Virtual A/B partition structure without a physical recovery partition, custom recovery images must be booted via "fastboot boot .img" or flashed directly to the boot partition.
- Connect your original USB Type-C cable directly to a rear motherboard USB 2.0 port to prevent communication drops while transferring multi-gigabyte super.img chunks.
Platform Architecture & Sibling Identity Notes
Fastboot flashing requires an officially unlocked bootloader via the Xiaomi Community account process. Recovery packages can be installed via stock Mi Assistant or booted custom recoveries.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi Pad 5 (Wi-Fi), including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via Fastboot: Open Fastboot Guide →
Xiaomi Pad 5 Hardware & Firmware Archive FAQ
The standard Xiaomi Pad 5 (nabu) is powered by the Qualcomm Snapdragon 860 chipset (7nm SM8150-AC) paired with an Adreno 640 GPU and is strictly a Wi-Fi-only tablet. In contrast, the Xiaomi Pad 5 Pro (codenamed enuma for Wi-Fi and elish for 5G) runs on the higher-clocked Snapdragon 870 chipset (SM8250-AC) with an Adreno 650 GPU, dual rear camera modules, faster 67W charging, and cellular baseband hardware on 5G units. Because the underlying SoC platform and board device trees differ fundamentally, firmware images between nabu and enuma/elish are strictly incompatible.
Under Xiaomi's firmware naming structure, "OS1.0" identifies the major Xiaomi HyperOS 1.0 generation. The first letter "T" specifies the underlying Google Android 13 operating system base. The two-letter code "KX" is the unique model identifier for the Xiaomi Pad 5 (nabu). The regional tag "EU" indicates the European Economic Area (EEA) firmware branch. Finally, the terminal suffix "XM" designates unlocked, open-market carrier distribution without operator-specific customizations.
The Xiaomi Pad 5 adopts Google's Virtual A/B (V/AB) and System-as-Root partition architecture. Under this layout, Google eliminated the standalone physical recovery partition. Instead, the recovery ramdisk is housed directly inside the kernel boot partition (boot.img). Attempting to execute "fastboot flash recovery" returns an error stating that the partition does not exist. Custom recoveries like OrangeFox or TWRP must be booted temporarily using "fastboot boot <recovery>.img" or flashed to the boot partition.
The Xiaomi Pad 5 utilizes high-speed UFS 3.1 non-volatile storage configured with Android dynamic partitions. The massive super.img partition (typically exceeding 4GB to 5GB) contains the sub-partitions system, system_ext, product, and vendor within a single contiguous block pool. During Fastboot flashing, the fastbootd binary on the device splits and writes super.img in sparse chunks, verifying block checksums directly before mapping the dynamic logical volumes.