Crucial Warning: These firmware packages are designed strictly for the Xiaomi Pad 5 Pro Wi-Fi (elish / M2105K81AC). Never flash these files onto the 5G model (enuma), standard Pad 5 (nabu), or the 12.4-inch Pad 5 Pro (dagu), as mismatched camera drivers, modem firmware, and panel calibrations will cause a hard brick. Because this is a China hardware model, never relock the bootloader (do not use "clean all and lock") when running modified software or third-party ROMs, as the device will fail secure boot verification.
Download Xiaomi Pad 5 Pro (elish) Stock ROM & Recovery
Official HyperOS Stock Firmware 2 packages
elish_images_OS1.0.2.0.TKYCNXM_20240507.0000.00_13.0_cn_f8476ce7cc.tgz
Official China mainland factory Fastboot image for model M2105K81AC. Clean factory restore and unbrick package for UFS 3.1 storage.
MD5: f8476ce7cc2f9a87276bb62398903b2f
miui_ELISH_OS1.0.2.0.TKYCNXM_da8102b61e_13.0.zip
Official China mainland Recovery update package for stock recovery installation, on-device updater, or ADB sideload.
MD5: da8102b61e42ab143a0294ecfba4ff9d
OrangeFox Custom Recovery 4 packages
OrangeFox-R11.3_A16-Unofficial-elish.zip
Flashable OrangeFox custom recovery installer ZIP for newer Android 14 to 16 trees. Flash from existing custom recovery or live boot ramdisk.
MD5: N/A
OrangeFox-R11.3_A16-Unofficial-elish.img
Fastboot bootable kernel ramdisk image. Run "fastboot boot OrangeFox-R11.3_A16-Unofficial-elish.img" to boot without overwriting kernel permanently.
MD5: N/A
OrangeFox-R11.3_A15-Unofficial-elish.zip
Flashable OrangeFox recovery installer ZIP tailored for Android 13 HyperOS 1.0 and MIUI 14 firmware trees.
MD5: N/A
OrangeFox-R11.3_A15-Unofficial-elish.img
Fastboot bootable kernel ramdisk image for Android 13 trees. Boot via "fastboot boot OrangeFox-R11.3_A15-Unofficial-elish.img".
MD5: N/A
5-Step Fastboot Flashing Guide for Xiaomi Pad 5 Pro
- Unlock the tablet bootloader using Xiaomi Mi Unlock tool bound to an authorized Mi Account.
- Unpack elish_images_OS1.0.2.0.TKYCNXM_20240507.0000.00_13.0_cn_f8476ce7cc.tgz twice with 7-Zip directly to a short root directory like C:\elish_fw.
- Put the tablet into Fastboot mode by holding Volume Down and Power until the orange FASTBOOT graphic appears.
- Open Mi Flash Tool, specify the extracted folder path, and select the clean all (flash_all.bat) script at the bottom right.
- Click Flash to write boot, modem, vendor, and dynamic super partition images, then wait for the tablet to reboot automatically.
Pre-Flash Hardware Checks & Requirements for elish
- Confirm the tablet codename reports "elish" by running "fastboot getvar product" in a command shell while connected in Fastboot mode.
- Check anti-rollback index status with "fastboot getvar anti" before flashing to ensure you are not downgrading past the hardware rollback fuse.
- Ensure the internal 8,600 mAh battery holds at least 50% charge to sustain power across the multi-gigabyte super.img dynamic partition flashing sequence.
- Connect the tablet directly to a rear USB 2.0 port on your computer motherboard using a verified USB Type-C data cable to prevent transfer dropouts.
- Extract the official .tgz archive (such as elish_images_OS1.0.2.0.TKYCNXM_20240507.0000.00_13.0_cn_f8476ce7cc.tgz) twice using 7-Zip directly into a short directory like C:elish_fw.
- For EDL unbrick recovery (Qualcomm HS-USB QDLoader 9008), be aware that Snapdragon 870 hardware requires an authorized Xiaomi account token to flash partition tables.
Hardware Architecture & Sibling Compatibility
Official Fastboot flashing requires an unlocked bootloader via the official Xiaomi Mi Unlock tool. Always select "clean all" (flash_all.bat) when flashing.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi Pad 5 Pro Wi-Fi, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via Fastboot: Open Fastboot Guide →
Xiaomi Pad 5 Pro Hardware & Firmware FAQ
The Snapdragon 870 is manufactured on TSMC's 7nm FinFET process. Its CPU configuration pairs a prime Kryo 585 core clocked at 3.20 GHz, three performance Kryo 585 cores at 2.42 GHz, and four efficiency Kryo 585 cores at 1.80 GHz. The integrated Adreno 650 GPU runs at 670 MHz. To smoothly render the 2560x1600 resolution at 120Hz, the SoC relies on a quad-channel LPDDR5 memory controller delivering high bandwidth to prevent frame drops across split-screen multitasking.
The Wi-Fi Pad 5 Pro (elish) and 5G Pad 5 Pro (enuma) share the Snapdragon 870 base but have distinct board layouts. Model elish uses a 13MP primary rear camera sensor and lacks cellular RF front-end modules, baseband filters, and a SIM slot. In contrast, enuma features a 50MP 1/2.76" image sensor and a Qualcomm Snapdragon X55 5G modem. Flashing an enuma build onto elish will cause camera initialization crashes and kernel panics due to missing baseband hardware.
The Xiaomi Pad 5 Pro uses System-as-Root (SAR) with Virtual A/B (V/AB) and Android dynamic partitions. The physical flash drive hosts a large dedicated "super" partition that houses logical sub-partitions including system, system_ext, product, and vendor. During fastboot flashing, flash_all.bat transfers sparse chunks into the active super slot, ensuring atomic updates without requiring separate fixed physical partitions for each Android subsystem.
The Xiaomi Pad 5 Pro features an eight-speaker acoustic setup divided into four high-frequency tweeters and four low-frequency mid-bass drivers, powered by custom Smart PA amplifiers with Dolby Atmos spatial tuning. To prevent thermal throttling on the Snapdragon 870 and Adreno 650 during extended gaming or video rendering, the chassis integrates a multi-layer graphite dissipation block and an oversized copper thermal shield spanning over 22,725 mm² across the motherboard and battery.
The Xiaomi Pad 5 Pro Wi-Fi launched in August 2021 running Android 11 with MIUI Pad 12.5. Xiaomi subsequently updated the tablet through Android 12 (MIUI Pad 13), Android 13 (MIUI Pad 14), and culminated in HyperOS 1.0 (build OS1.0.2.0.TKYCNXM). Because elish was sold strictly through mainland China retail channels, all official firmware releases carry the CNXM regional branch identifier.