Crucial Warning: These packages are strictly for the Xiaomi Pad 6 Max 14 (yudi / 2307BRPDCC). Packages carrying the VMH identifier must never be flashed onto other Pad 6 variants such as the Pad 6 (pipa / Snapdragon 870), Pad 6 Pro (liuqin), or Pad 6S Pro (sheng), as differing display drivers, audio topologies, and partition structures will cause a severe brick. When flashing with Mi Flash Tool, always select "clean all" (flash_all.bat) and avoid "clean all and lock".
Download Firmware for Xiaomi Pad 6 Max 14
China Stable 2 packages
yudi_images_OS3.0.6.0.VMHCNXM_20260715.0000.00_15.0_cn_5401de2510.tgz
Official China mainland factory Fastboot package for model 2307BRPDCC. Features 14-inch 120Hz display calibration, 8-speaker audio drivers, and clean factory unbrick.
MD5: 5401de251056d7f89259987d2eea244a
yudi-ota_full-OS3.0.6.0.VMHCNXM-user-15.0-7b73783799.zip
Official China mainland Recovery OTA update package for on-device updater installation or stock recovery sideloading.
MD5: 7b737837997f509ebfe8ec5663a29844
Flashing Overview for Xiaomi Pad 6 Max 14
- Unlock the tablet bootloader using the official Xiaomi Mi Unlock tool with an authorized Mi Account.
- Decompress the downloaded .tgz Fastboot archive twice with 7-Zip until "flash_all.bat" appears.
- Turn off the tablet completely and hold Volume Down and Power together until FASTBOOT displays on screen.
- Launch Mi Flash Tool, select the extracted folder path, and confirm that "clean all" is selected.
- Click "Flash" and maintain the USB connection until status reports success and the tablet restarts.
Expand preparation checklist for Xiaomi Pad 6 Max 14
- Confirm the tablet codename is "yudi" by checking Settings -> About Tablet or running "fastboot getvar product" in Fastboot mode.
- Ensure the internal 10,000 mAh battery holds at least 50% charge to ensure stable power during dynamic super partition writes.
- Connect the tablet directly to a rear USB 2.0 port on the computer motherboard using a quality USB Type-C data cable.
- Verify that bootloader unlocking is officially granted and completed via the Xiaomi Mi Unlock utility.
- Unpack the downloaded .tgz archive twice using 7-Zip directly to a short root directory such as C:yudi_fw to avoid Windows file path limits.
- Install official Qualcomm USB QDLoader and Google Android Fastboot drivers on a 64-bit Windows PC.
Compatibility & Bootloader Notes
Official Fastboot flashing requires an unlocked bootloader through the Xiaomi Community authorization process. Always select "clean all" (flash_all.bat) when flashing.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi Pad 6 Max 14, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via Fastboot: Open Fastboot Guide →
Frequently Asked Questions
The Snapdragon 8+ Gen 1 (SM8475) is built on TSMC's 4nm node, featuring one Cortex-X2 prime core clocked up to 3.19 GHz, three Cortex-A710 performance cores at 2.75 GHz, four Cortex-A510 efficiency cores at 1.80 GHz, and an Adreno 730 GPU running at 900 MHz. Driving the 14.0-inch 2.8K (1800 x 2880) panel at 120Hz requires sustained pixel throughput exceeding 500 megapixels per second. The platform pairs quad-channel LPDDR5X RAM with UFS 3.1 storage and an enlarged graphite heat spreader to maintain peak framerates and windowed multi-tasking without thermal throttling.
The tablet incorporates a 10,000 mAh dual-cell lithium-polymer battery managed by custom Xiaomi Surge charging chipsets. When connected to a compatible fast charger, the charge pump divides input current to provide 67W HyperCharge, reaching full capacity in approximately 68 minutes. The onboard power delivery controller also supports bidirectional DC-DC conversion, enabling the USB Type-C 3.2 port to deliver up to 33W of reverse wired power to charge smartphones, styluses, or other accessories via USB Power Delivery standards.
While sharing the Pad 6 generation branding, each model is built on distinct silicon and board revisions. The standard Pad 6 (pipa) runs on Qualcomm's Snapdragon 870 (SM8250-AC), the Pad 6 Pro (liuqin) uses a different panel controller, and the Pad 6S Pro (sheng) uses the Snapdragon 8 Gen 2. Bootloader binaries, device tree blobs (DTBs), power management IC mappings, and the 8-speaker audio routing in yudi firmware are unique to board 2307BRPDCC; cross-flashing will result in a hard brick.
The Xiaomi.eu developer community focuses primarily on devices with global releases or widespread international retail demand. Because the Pad 6 Max 14 was released exclusively for the mainland Chinese market, the team did not maintain a dedicated custom ROM branch. Users needing multilingual support outside Chinese and English utilize the built-in Google Mobile Services framework on official China HyperOS or deploy Project Treble Generic System Images (GSIs) with unlocked bootloaders.