Crucial Warning: Flashing via flash_all.bat reformats internal UFS 2.2 storage, erasing all user files, photos, and device settings. Packages carrying the TKNJPXM build identifier belong strictly to the lilac Qualcomm Snapdragon 480 hardware platform. Never flash packages meant for the global MediaTek-powered Redmi Note 10 5G / Note 10T (camellian) or the au-exclusive Redmi Note 10 JE (iris), as cross-flashing incompatible partition maps will cause an immediate hard brick. When flashing through Mi Flash Tool, always confirm that "clean all" (flash_all.bat) is selected.
Download Firmware for Xiaomi Redmi Note 10T 5G (Japan)
lilac_jp_global_images_V14.0.34.0.TKNJPXM_20250225.0000.00_13.0_jp_3c554078c9.tgz
Official Japan Fastboot TGZ release on Android 13.0 with MIUI 14. Recommended build for unbricking and clean factory restoration on SIM-free 22021119KR and SoftBank A101XM units.
MD5: 3c554078c9e44893db15dbcc6f236c78
miui_LILACJPGlobal_V14.0.34.0.TKNJPXM_f908a3ff20_13.0.zip
Official Japan Stable Recovery OTA update package for stock recovery installation, local on-device updates, or ADB sideload.
MD5: f908a3ff20a751c729cff0575bb83911
Flashing Overview for Xiaomi Redmi Note 10T 5G (Japan)
- Unlock the phone bootloader using the official Xiaomi Mi Unlock utility.
- Extract the .tgz archive twice using 7-Zip until flash_all.bat and the images folder appear.
- Power off the phone and hold Volume Down + Power together until the FASTBOOT screen displays.
- Open Mi Flash Tool, select the extracted firmware root directory, and choose "clean all".
- Click "Flash" and keep the phone connected while sparse partitions stream into UFS 2.2 storage.
Expand preparation checklist for Xiaomi Redmi Note 10T 5G (Japan)
- Verify your phone codename is 'lilac' by running 'fastboot getvar product' from a command line while in Fastboot mode.
- Unlock the bootloader using the official Xiaomi Mi Unlock utility before attempting Fastboot partition flashing.
- Install official Qualcomm HS-USB QDLoader 9008 drivers and Android SDK Platform-Tools on a 64-bit Windows PC.
- Ensure the 5,000 mAh battery has at least 50% charge before beginning the flashing procedure to avoid power drops.
- Extract the Fastboot .tgz archive twice using 7-Zip until flash_all.bat and the images folder appear.
- Connect the phone directly to a rear motherboard USB 2.0 port using a certified Type-C USB data cable.
Compatibility & Bootloader Notes
Official Fastboot flashing requires an unlocked bootloader via the official Xiaomi Mi Unlock tool. Note that Japanese accounts and SoftBank A101XM units undergo Xiaomi account binding with a mandatory 168-hour review period.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi Redmi Note 10T 5G (Japan), including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via Fastboot: Open Fastboot Guide →
Frequently Asked Questions
The Japanese Redmi Note 10T (lilac) is engineered around Qualcomm's 8nm Snapdragon 480 5G platform (SM4350), comprising two Kryo 460 Gold performance cores (Cortex-A76 at 2.0 GHz) and six Kryo 460 Silver efficiency cores (Cortex-A55 at 1.8 GHz) paired with an Adreno 619 GPU. In contrast, the global Redmi Note 10 5G and Indian Redmi Note 10T (camellian) use MediaTek's Dimensity 700 (MT6833). Xiaomi chose the Qualcomm silicon for Japan to fulfill domestic carrier RF front-end band filtering, integrated Qualcomm X51 5G modem compliance, and Sony FeliCa secure element bus synchronization.
The UFS 2.2 memory controller on lilac operates over a high-speed synchronous serial interface supporting WriteBooster acceleration. During Fastboot execution via flash_all.bat, the raw dynamic super partition (super.img)—which encapsulates system, vendor, and product logical partitions—is transmitted in uncompressed sparse chunks. The UFS 2.2 controller achieves sequential write rates exceeding 250 MB/s, preventing host buffer under-run errors while the Qualcomm bootloader streams dynamic partitions.
While both the Redmi Note 10T Japan (lilac) and Redmi Note 10 JE (iris) feature Qualcomm Snapdragon 480 silicon, IP68 water resistance, and FeliCa hardware, they represent separate hardware builds. The Note 10 JE (XIG02) was designed exclusively for au / UQ mobile with a 48 MP rear sensor and 4,800 mAh battery. The Note 10T Japan (lilac, A101XM / 22021119KR) was released for SoftBank and SIM-free channels with an upgraded 50 MP primary camera (Samsung S5KJN1) and a 5,000 mAh battery. Their bootloader cryptographic signatures, camera ISP drivers, and partition layouts differ, making firmware non-interchangeable.
On the lilac platform, Sony FeliCa Type-F radio calibration and cryptographic secure element provisioning parameters are stored in the hardware-protected persist partition (persist.img). The official JPXM firmware branch contains proprietary Qualcomm radio interface layer (RIL) binaries and Osaifu-Keitai daemon hooks required to communicate with the onboard secure element. Flashing unverified non-Japan firmware wipes or omits these daemon services, rendering transit apps like Mobile Suica and PASMO permanently inoperative.