Crucial Warning: Flashing via flash_all.bat completely wipes internal eMMC 5.1 storage, restoring all system partitions to factory state. Firmware packages carrying the QCP product tag belong strictly to the olivelite board. Never cross-flash packages intended for the standard Redmi 8 (olive / dual camera with rear fingerprint) or Redmi 8A Dual (olivewood / dual camera), as mismatched kernel drivers and board IDs will cause severe sensor faults or drop the device into Qualcomm 9008 EDL mode. When flashing imported handsets, always select "clean all" (flash_all.bat) and avoid "clean all and lock".
Official Xiaomi Redmi 8A Stock ROM Packages
Global & European (EEA) Fastboot & Recovery ROMs 4 packages
olivelite_eea_global_images_V12.5.3.0.QCPEUXM_20211026.0000.00_10.0_eea_417695605c.tgz
Official European Economic Area (EEA) Fastboot factory package. Recommended release for UK and European models. Decompress twice with 7-Zip and flash via Mi Flash Tool using clean all.
MD5: 417695605c9e28ab66f5832ac3b40333
miui_OLIVELITEEEAGlobal_V12.5.3.0.QCPEUXM_ae6927c3ae_10.0.zip
Official European (EEA) recovery update package. Install via MIUI system updater or stock recovery sideload on locked or unlocked devices.
MD5: ae6927c3ae1a00917eeca5bf3f2dbc10
olivelite_global_images_V12.5.2.0.QCPMIXM_20211025.0000.00_10.0_global_213ef1784d.tgz
Official Global Fastboot factory package with full Google Mobile Services and multi-language support. Ideal for international unbricking and clean factory flashing.
MD5: 213ef1784df9cfc276a00d51b4498ae0
miui_OLIVELITEGlobal_V12.5.2.0.QCPMIXM_1c495cd112_10.0.zip
Official Global recovery update package. Deploy via MIUI system updater or stock recovery sideload.
MD5: 1c495cd112b635935acf00a655e17a06
Regional (India, Indonesia & Russia) Fastboot & Recovery ROMs 6 packages
olivelite_in_global_images_V12.5.2.0.QCPINXM_20211010.0000.00_10.0_in_2070760cb5.tgz
Official India Fastboot factory image tailored for Indian telecommunications networks and regional carrier aggregations.
MD5: 2070760cb50a9a9e9909512050c3ee3a
miui_OLIVELITEINGlobal_V12.5.2.0.QCPINXM_d2322fb180_10.0.zip
Official India recovery update package. Install via MIUI updater menu or stock recovery.
MD5: d2322fb18035729ebd3ab1c27a38d82d
olivelite_id_global_images_V12.5.3.0.QCPIDXM_20220804.0000.00_10.0_global_f6f399902a.tgz
Official Indonesia Fastboot factory image featuring localized regulatory certification and carrier configurations.
MD5: f6f399902aadcbf8a474e0969b00c8cd
miui_OLIVELITEIDGlobal_V12.5.3.0.QCPIDXM_616e6858e9_10.0.zip
Official Indonesia recovery update package. Install via MIUI system updater or recovery mode.
MD5: 616e6858e94f4bd3b51382ef5537cfb7
olivelite_ru_global_images_V12.5.2.0.QCPRUXM_20211010.0000.00_10.0_global_0b46f1d117.tgz
Official Russia Fastboot image with Russian language customization and local mobile network band configurations.
MD5: 0b46f1d117041e491e96183b6c3caa64
miui_OLIVELITERUGlobal_V12.5.2.0.QCPRUXM_bdc333e626_10.0.zip
Official Russia recovery update package. Deploy via MIUI system updater or stock recovery sideload.
MD5: bdc333e6262235ac5371fee2c3edd15f
China Domestic Fastboot & Recovery ROMs 2 packages
olivelite_images_V12.5.3.0.QCPCNXM_20211105.0000.00_10.0_cn_11862639cb.tgz
Official China mainland Fastboot factory package for domestic models. Note: Does not include Google Play Services out of the box. Always flash using clean all.
MD5: 11862639cbe2925774fbcdbbdd6c8f7b
miui_OLIVELITE_V12.5.3.0.QCPCNXM_198cfaf84e_10.0.zip
Official China mainland recovery update package for domestic Chinese retail editions.
MD5: 198cfaf84ef21ffe097636243b3b6348
Custom Recovery (TWRP & OrangeFox) 2 packages
twrp-3.7.0_9-0-olivelite.img
Official TeamWin Recovery Project build maintained by AltsecDEV for olivelite. Flash directly to the physical recovery partition on an unlocked bootloader.
MD5: 3dc58ea096d29da758ea003ff584061a
⬇️ Download (2 links)
OrangeFox-olivelite-stable.zip
Official OrangeFox recovery package for olivelite. Flashable ZIP via existing custom recovery, or extract recovery.img to flash via Fastboot.
MD5: 6a6237dd1bcfa25d3fa7b159f8ce3248
Fastboot Restoration Milestones
- Unlock olivelite bootloader via Xiaomi Mi account and Mi Unlock utility
- Decompress olivelite TGZ factory package twice using 7-Zip to extract flash_all.bat
- Put Redmi 8A into Fastboot mode by holding Volume Down and Power buttons
- Check rollback index with fastboot getvar anti and verify olivelite product tag
- Open Mi Flash Tool on USB 2.0 port, select "clean all", and flash images
Pre-Flash Hardware Verification & Triage
- Verify your phone codename is olivelite by executing 'fastboot getvar product' while connected in Fastboot mode.
- Check the anti-rollback protection index by running 'fastboot getvar anti' to ensure your target package does not trigger an anti-rollback brick.
- Confirm that the 5000 mAh battery holds at least 50% charge to ensure steady power delivery during partition flashing.
- Check eMMC 5.1 storage health; devices suffering from I/O read-only lockouts should be diagnosed before flashing.
- Unlock the bootloader using the official Xiaomi Mi Unlock tool before attempting Fastboot flashing.
- Decompress your Fastboot archive (such as olivelite_eea_global_images_V12.5.3.0.QCPEUXM_20211026.0000.00_10.0_eea_417695605c.tgz) twice using 7-Zip until flash_all.bat and the images folder are visible in a directory without spaces.
- If unbricking a deeply discharged phone via Qualcomm EDL 9008 test points, disconnect the battery flex cable before shorting the two gold test pads adjacent to the SIM tray.
Snapdragon 439 Partition & Motherboard Notes
Flashing Fastboot packages with Mi Flash Tool requires an officially unlocked bootloader via the Xiaomi Mi Unlock utility. When flashing across regions (such as Global or EEA firmware on a Chinese model), never choose "clean all and lock" (flash_all_lock.bat), as regional cryptographic signature validation will lock the bootloader and cause a bootloop.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi Redmi 8A, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via Fastboot: Open Fastboot Guide →
Redmi 8A Architecture & Firmware FAQ
Although the Redmi 8A (olivelite), Redmi 8 (olive), and Redmi 8A Dual / Pro (olivewood) all share Qualcomm's Snapdragon 439 system-on-chip, their motherboard component topologies differ significantly. The Redmi 8A (olivelite) features a single 12 MP rear camera (Sony IMX486 or IMX363 sensor) and completely omits the physical fingerprint scanner circuitry. The standard Redmi 8 (olive) integrates a dual rear camera setup (12 MP + 2 MP depth) and a capacitive Goodix or FPC fingerprint controller on the rear flex. The Redmi 8A Dual (olivewood) utilizes a 13 MP primary sensor paired with a 2 MP secondary lens without a fingerprint reader. Because kernel device trees configure GPIO pins specifically for these distinct hardware lines, flashing an olive recovery or boot image onto an olivelite board leads to sensor detachment, black screen freezes, or bootloops.
The software lifecycle for the Redmi 8A concluded with MIUI 12.5 based on Android 10 (Q). Qualcomm's Snapdragon 439 was designed as an entry-level 12nm platform, and base configurations of the phone shipped with 2 GB or 3 GB of single-channel LPDDR3 RAM paired with eMMC 5.1 flash storage. While MIUI 12.5 delivered system optimizations, transitioning the phone to Android 11 would have demanded substantial background memory reserves that 2 GB hardware could not reliably support without severe background app clearing and interface latency. As a result, Xiaomi capped official maintenance on the Android 10 LTS branch.
The Redmi 8A utilizes an eMMC 5.1 storage controller communicating over a single 8-bit bus. The storage layout uses Qualcomm's traditional non-A/B System-as-Root (SAR) partitioning scheme, rather than dynamic super partitions found on newer Android 11+ devices. Critical partitions—including boot, recovery, system, vendor, and cust—occupy fixed physical blocks on the flash memory. This traditional partition scheme means custom recoveries like TWRP can be flashed directly to the dedicated physical recovery partition using standard fastboot commands.
Xiaomi identifies official Redmi 8A builds using a standardized seven-letter code. In identifiers such as V12.5.3.0.QCPEUXM and V12.5.2.0.QCPMIXM, the first letter "Q" represents the underlying base operating system (Android 10 Q). The two-letter tag "CP" represents the olivelite hardware platform (whereas olive uses "CN"). The fourth and fifth letters specify the regional software channel: "EU" designates European Economic Area (EEA), "MI" designates Global, "IN" designates India, "ID" designates Indonesia, "RU" designates Russia, and "CN" designates China mainland. The final two letters "XM" denote official unlocked commercial retail distribution.