Crucial Warning: When flashing Fastboot packages via Mi Flash Tool, always select "clean all" (flash_all.bat). Never select "clean all and lock" (flash_all_lock.bat) on imported Chinese hardware running custom or cross-region software, as relocking foreign signatures causes an irrecoverable brick. Do not confuse picasso (64 MP Sony IMX686) with the 4G Redmi K30 / POCO X2 (phoenix, Snapdragon 730G), as partition layouts share zero compatibility.
Official Xiaomi Redmi K30 5G Firmware & Recovery Downloads
Official Xiaomi MIUI 13 Fastboot Packages 1 package
picasso_images_V13.0.5.0.SGICNXM_20221028.0000.00_12.0_cn_chinatelecom_208c44e5c4.tgz
Official China Telecom Fastboot factory package for unbricking and clean flashing.
⬇️ Download via MIUI OTAOfficial Xiaomi.eu Multilingual Custom ROMs 1 package
xiaomi.eu_multi_HMK305G_V13.0.5.0.SGICNXM_v13-12-fastboot.zip
Xiaomi.eu multilingual custom ROM with Google Mobile Services and European bloatware removal, packaged in Fastboot script format.
MD5: cbdab394c4721248f97be1fc6f7b59ae
Custom Recovery Binaries (TWRP & OrangeFox Projects) 2 packages
TWRP-3.4.2B-0623-REDMI_K30_5G-CN-wzsx150-fastboot.zip
Custom TWRP 3.4.2B recovery environment bundled with automated Fastboot one-click installation script by wzsx150.
MD5: c37acefdb9132010cbea55200443835c
OrangeFox-R11.3_3-picasso.zip
OrangeFox custom recovery project build for Redmi K30 5G with support for dynamic partitions and MIUI OTA survivability.
MD5: b4421474cb44898b533e690c13f15413
Mi Flash & Fastboot Restoration Milestones
- Download and extract official Fastboot TGZ archive with 7-Zip to a root directory like C:\picasso_fw
- Reboot device to Fastboot mode by pressing and holding Volume Down and Power together
- Connect to PC USB 2.0 port and verify connection with the command "fastboot devices"
- Open Xiaomi Mi Flash Tool, select the unzipped directory, and select "clean all" at the bottom right
- Click Flash to write partition images and allow 5 to 7 minutes for the initial MIUI 12 first boot
Hardware Triage, Anti-Rollback & Board Verification
- 1. Check your hardware model under Settings > About Phone or on the rear casing (M1912G7BC/BE for K30 5G with 64 MP camera, M2004J7BC for K30i 5G with 48 MP camera).
- 2. Extract your chosen Fastboot archive (such as picasso_images_V13.0.5.0.SGICNXM_20221028.0000.00_12.0_cn_chinatelecom_208c44e5c4.tgz) twice using 7-Zip into a clean root directory like C:picasso_fw to prevent command line path truncation.
- 3. Snapdragon 765G USB controllers can drop communication over high-speed USB 3.0 ports — connect directly to a rear motherboard USB 2.0 port with an authentic data sync cable.
- 4. Ensure your 4500 mAh battery has at least 50% charge to prevent power failure during dynamic super partition writes.
- 5. In severe brick cases where Fastboot mode is inaccessible, Qualcomm HS-USB QDLoader 9008 EDL test points are situated beside the battery connector beneath the rear glass cover.
Qualcomm Snapdragon 765G Architecture & Sibling Demarcation
Xiaomi devices require an officially unlocked bootloader via the Mi Unlock utility prior to writing Fastboot images or booting custom recoveries. Always keep the bootloader unlocked when flashing modified software or European ROMs.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi Redmi K30 5G, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via Fastboot: Open Fastboot Guide →
Technical & Archival Questions About the "picasso" Platform
The Redmi K30 5G (picasso) features a 64 MP Sony IMX686 main camera and Qualcomm Snapdragon 765G processor with integrated 5G modem. The Redmi K30i 5G (picasso_48m) is a twin variant that shares the same Snapdragon 765G motherboard but replaces the primary sensor with a 48 MP camera, requiring dedicated camera kernel drivers. In contrast, the Redmi K30 4G (phoenix / POCO X2) runs on an entirely different Qualcomm Snapdragon 730G 4G platform; flashing firmware across 4G and 5G models will result in a hard brick.
Yes. Build V13.0.5.0.SGICNXM based on Android 12.0 marks the final official stable milestone released by Xiaomi for the Redmi K30 5G family before transitioning the model to end-of-support (EOS) status. While official Chinese updates ended here, community projects like Xiaomi.eu and custom recoveries allow users to continue using modern security and multilingual enhancements.
The TWRP 3.4.2B package by developer wzsx150 is packaged as a Windows batch toolkit that automates unlocking verification and Fastboot flashing via a graphical command prompt. In contrast, OrangeFox Recovery R11.3_3 is a standalone recovery environment featuring integrated dynamic partition management, built-in Magisk survival engines, and updated encryption libraries engineered specifically for Android 11 and 12 MIUI builds.