Xiaomi Redmi 3 (ido) Firmware Flash File Download [Stock ROM]
Xiaomi Redmi 3 (codename ido) was a significant upgrade in the Redmi series, introducing a metal unibody design and substantial 4100mAh battery in a compact form factor. If your device is experiencing bootloops, battery calibration issues, or general performance lag, flashing the correct stock firmware can restore its original stability. This page provides official fastboot ROMs for both Chinese and Global variants, a optimized Xiaomi.eu ROM, and the latest TWRP recovery.
Important Note: The Redmi 3 (ido) uses a Qualcomm Snapdragon 616 processor and should not be confused with the later Redmi 3S (land) which features a Snapdragon 430. Their firmware is not interchangeable. Always confirm your codename is ido before flashing.
Quick Device Specs
- Device: Redmi 3 (ido)
- Release year: 2016
- Chipset: Qualcomm Snapdragon 616 (MSM8939)
- Display: 5.0″ IPS LCD, 720p
- Battery: 4100 mAh (Non-removable)
- Key Feature: Full metal body, high battery capacity
- Original OS: Android 5.1, MIUI 7
- Final Official MIUI: MIUI 9 (Android 5.1 Lollipop)
Required Downloads
| File / Tool | Download Link |
|---|---|
| Xiaomi Mi Flash Tool | Download Latest Version |
| Qualcomm QDLoader Drivers | Download Drivers (For EDL mode) |
| Bootloader Unlock Tool | Official Mi Unlock Page (Mandatory) |
| ADB and Fastboot Tools | Download from Google |
Fastboot ROMs & Tools
| Type | Build / Version | Android | Release Date | Download | Size |
|---|---|---|---|---|---|
| China Stable (CN) | V9.6.1.0.LAICNFD | 5.1 (Lollipop) | 2018-06-19 | Download | ~1.2 GB |
| Global Stable | V9.6.2.0.LAIMIFD | 5.1 (Lollipop) | 2018-08-13 | Download | ~1.2 GB |
| Xiaomi.eu (Custom) | V9.5.2.0.LAICNFA | 5.1 (Lollipop) | — | Download | ~750 MB |
| TWRP Recovery (Official) | 3.7.0_9-0 | — | — | Download | ~14 MB |
How to Flash via Fastboot (Mi Flash Tool)
- Unlock your bootloader using the official Mi Unlock tool. This is a mandatory first step.
- Extract the downloaded .tgz firmware file to a folder on your PC.
- Open Mi Flash Tool. Click Select and choose the extracted ROM folder.
- With your phone powered off, boot into Fastboot mode (Hold Volume Down + Power). Connect it to the PC.
- In Mi Flash Tool, choose the clean all option. Avoid “clean all and lock” unless you are absolutely certain you are flashing the correct stock ROM for your device’s original region.
- Click Flash and wait for the process to complete. The first boot may take 5-10 minutes.
FAQs
Q1. Why did my Redmi 3 never get an Android upgrade beyond Lollipop?
The Redmi 3 (ido) was launched with Android 5.1 and remained on that version throughout its official support life. Xiaomi focused development resources on newer devices, and the Snapdragon 616’s limited resources made further Android upgrades impractical from the company’s perspective. However, the custom ROM community has developed Marshmallow and Nougat builds for this device.
Q2. My battery percentage is inaccurate or jumps randomly. How can I fix this?
This is a common issue on older devices with degraded batteries. The battery calibration data becomes inaccurate over time. A clean flash of stock ROM can help recalibrate the battery management system. For best results, after flashing:
- Charge to 100% without interruption
- Use until it powers off completely
- Charge again to 100% without turning on
- Repeat this cycle 2-3 times
Q3. Can I install custom ROMs on the Redmi 3?
Yes, though development is more limited than for newer devices. There are custom ROMs available such as LineageOS 13 (Android 6.0) and some Android 7.1 builds. The Snapdragon 616 can handle these reasonably well. Use the latest TWRP 3.7.0 for best compatibility with custom ROMs.
Q4. Why is my device overheating during normal use?
The Snapdragon 616 is known to run warm, especially when under load. However, excessive heating could indicate:
- Background processes/malware
- Degraded thermal paste
- Battery nearing end of life
A clean flash will eliminate software causes. If heating continues, consider replacing the battery and reapplying thermal paste.
Troubleshooting (Ido-Specific)
- “Antirollback check error” in Mi Flash Tool: The Redmi 3 has Anti-Rollback (ARB) protection. You cannot flash older ROM versions. Check your current ARB version with
fastboot getvar antiand ensure you’re flashing a ROM with the same or higher version number. - Device not detected in Fastboot mode: This is usually a driver issue. Install the latest ADB/fastboot drivers and try a different USB cable and port (preferably USB 2.0). Check device detection with
fastboot devicesin the command prompt. - Phone boots directly to Fastboot mode: This indicates a corrupted
boot.imgor system partition. Flash the complete stock ROM using the “clean all” option in Mi Flash Tool to restore all partitions. - Wi-Fi or Bluetooth turning on: This can be caused by a corrupted
persistpartition. Flashing the stock ROM usually restores this partition. If not, the issue may be a failing Wi-Fi/BT chip. - Screen flickering or unresponsive touch: This is often a hardware issue with the display assembly or digitizer. While a software reflash can sometimes help, persistent screen issues typically require hardware repair or replacement.
- Error 7 when flashing custom ROMs in TWRP: This indicates the ROM is not compatible with your firmware version. Ensure you’re using the correct TWRP version and that you’ve installed the latest firmware package before installing the custom ROM.
