ZTE Axon 30 Pro (A2022)

ZTE Axon 30 Pro (A2022) Firmware Flash File Download [Stock Rom]

The ZTE Axon 30 Pro (model A2022) is a flagship smartphone from 2021, packing a top-tier Snapdragon 888 5G chipset, a 120Hz AMOLED display, and a powerful quad-camera system. This official stock firmware is for the Chinese market version of the device. For users who need to unbrick their phone, resolve critical software errors, or restore the device to its original factory software, flashing this ROM is the definitive solution.

Important Note: This is the official China ROM and therefore does not include Google Play Services (Play Store). The restoration process requires the use of the QFIL (Qualcomm Flash Image Loader) tool, as the device is powered by a Qualcomm chipset.


Quick Device Specs

  • Device: ZTE Axon 30 Pro (A2022)
  • Release year: 2021
  • Chipset: Qualcomm Snapdragon 888 5G
  • Display: 6.67″ AMOLED, 120Hz, HDR10+
  • Battery: 4200 mAh (Non-removable)
  • Memory: 6GB/8GB RAM + 128GB/256GB storage
  • Camera: 64MP+64MP+5MP+2MP quad rear, 16MP front
  • OS: Android 11 with MyOS 11
  • Region: China (No Google Play Services)

Required Downloads

File / Tool Download Link
QPST (QFIL) Tool Download QPST Tool
Qualcomm USB Drivers Download Drivers

Stock ROM & Firmware

Version Android Region Type Download Size
V1.0.0B07 11 China QPST Download ~4.5 GB

Quick Flashing Guide

  1. Download and install the Qualcomm USB Drivers and the QPST Tool on your PC.
  2. Extract the downloaded firmware ZIP file to a folder on your computer.
  3. Power off your Axon 30 Pro and boot it into EDL Mode by holding the Volume Up + Volume Down buttons while connecting it to the PC via USB-C cable.
  4. Launch QFIL, load the firmware files (prog_…mbn and rawprogram/patch XMLs), and click the “Download” button to begin flashing.

For a complete, step-by-step tutorial with screenshots, please refer to our definitive guide:
How to Flash Firmware on Qualcomm Smartphones with QFIL


FAQs

Q1. Can I install this on a Global or European version of the Axon 30 Pro?

No. This firmware is specifically for the Chinese model (A2022). Flashing it on a different regional variant can cause bricking or severe issues, including loss of network connectivity, due to differences in hardware and software partitions.

Q2. Can I install the Google Play Store after flashing this firmware?

This firmware does not include Google Mobile Services (GMS). While it is sometimes possible to manually install GMS on Chinese ROMs, the process can be complex, and apps may not function correctly. This firmware will not automatically add the Play Store.

Q3. What is EDL Mode and why is it required?

EDL (Emergency Download) Mode is a special, low-level recovery state on Qualcomm devices. It allows QFIL to communicate directly with the phone’s storage, bypassing a corrupted operating system. It is the standard method for unbricking a Qualcomm-powered device that won’t turn on.

Q4. Can I use this firmware to convert my Chinese phone to a Global version?

No. This firmware will only restore the original Chinese software. Converting a phone’s region is a much more complex process that typically requires specific cross-flashing firmware and carries significant risks.


Troubleshooting (ZTE Axon 30 Pro)

  • QFIL shows “No Port Available” or a “Sahara/Firehose” error: This is the most common flashing issue and is almost always caused by a driver problem. Reinstall the Qualcomm 9008 drivers, check Windows Device Manager to ensure the device is recognized in EDL mode, and use a high-quality USB-C cable.
  • Phone boots into the Chinese language: During the initial setup wizard, look for the language selection option (usually on the first screen, marked with a globe icon or the word 语言) to switch to English.
  • No 5G service outside of China: The modem in the Chinese model is configured for Chinese 5G network bands. While you may get 4G/LTE service in other countries, 5G connectivity is not guaranteed and may not work correctly.
  • Device stuck on the MyOS logo after flashing: The first boot after a full flash can be very slow. Wait at least 15-20 minutes. If it is still stuck, boot into recovery mode (hold Volume Up + Power from off) and perform a “Wipe data/factory reset”.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *