ZTE Blade 10 Z6530M Firmware Flash File Download [Stock Rom]
The ZTE Blade V10 (also known as Blade 10, model Z6530M) is a mid-range smartphone from 2019 that gained attention for its high-resolution 32MP front-facing camera and capable MediaTek Helio P70 chipset. If your Blade V10 is suffering from software issues like being stuck in a bootloop, experiencing frequent app crashes, or needs a full restore to factory condition, flashing the official stock firmware is the most reliable solution.
Important Note: This device is powered by a MediaTek Helio P70 (MT6771) chipset. The restoration process requires the use of SP Flash Tool. Some MediaTek devices of this era may have Secure Boot; if you encounter authentication errors, an additional bypass step may be necessary.
Quick Device Specs
- Device
- ZTE Blade V10 (Z6530M)
- Release year
- 2019
- Chipset
- MediaTek Helio P70 (MT6771)
- Display
- 6.3″ IPS LCD, 2280×1080
- Battery
- 3200 mAh (Non-removable)
- Memory
- 3GB/4GB RAM + 32GB/64GB storage
- Camera
- Dual 16MP + 5MP rear, 32MP front
- OS
- Android 9.0 (Pie)
Required Downloads
| File / Tool | Download Link |
|---|---|
| SP Flash Tool | Download Tool |
| MediaTek USB VCOM Drivers | Download Drivers |
Stock ROM & Firmware
| Version | Android | Region | Type | Download | Size |
|---|---|---|---|---|---|
| V1.0.0B16 | 9.0 (Pie) | Global | SP Flash Tool | Download | ~1.7 GB |
Quick Flashing Guide
- Download and install the MediaTek VCOM drivers and the SP Flash Tool on your computer.
- Extract the downloaded firmware ZIP file to find the `MT6771_Android_scatter.txt` file.
- Launch SP Flash Tool, load the scatter file, and ensure the flashing mode is set to “Download Only.”
- Power off your phone, click the “Download” button in the tool, and then connect the phone to your PC via USB to begin.
For a complete, step-by-step tutorial with screenshots, please refer to our definitive guide:
How to Flash Stock Firmware on MediaTek (MTK) Smartphones
FAQs
Q1. Is the ZTE Blade V10 the same as the Blade V10 Vita?
No. The Blade V10 Vita is a different, lower-specification model that uses a UNISOC chipset. This firmware is strictly for the standard ZTE Blade V10 (Z6530M) with the Helio P70 chipset. Using the wrong firmware will brick your device.
Q2. I’m getting a BROM or authentication error in SP Flash Tool. What should I do?
This error can occur on MediaTek chipsets with Secure Boot. The first step is always to ensure your VCOM drivers are correctly installed. If driver issues are ruled out, your device may require an “Auth Bypass” tool to allow flashing. For details on that advanced process, see our Auth Bypass Guide.
Q3. What is a “scatter file”?
A scatter file (`.txt`) is a map of your phone’s internal storage, specific to MediaTek devices. It tells the SP Flash Tool the exact location and size of each partition (like system, boot, etc.), ensuring the firmware is written to the correct place.
Q4. Can I use this firmware to update my phone to Android 10?
No. This is an official stock firmware package for Android 9.0 Pie. The ZTE Blade V10 did not receive a widespread official update to Android 10.
Troubleshooting (ZTE Blade V10)
- SP Flash Tool does not detect the phone: This is the most common issue. Reinstall the VCOM drivers, disable Driver Signature Enforcement in Windows if needed, restart your PC, and use a different USB port and cable.
- Error: “PMT changed for the ROM”: This error occurs if the partition table on your phone doesn’t match the firmware. You can usually fix this by changing the flashing mode in SP Flash Tool from “Download Only” to “Firmware Upgrade”.
- Device is stuck in a bootloop after a successful flash: The first boot can be slow. If it’s still stuck after 15 minutes, boot into recovery mode (hold Volume Up + Power from off) and perform a “Wipe data/factory reset”.
- “Invalid IMEI” after flashing: This can happen if you accidentally use the “Format All + Download” option. To avoid this critical error, always use the “Download Only” mode.
