ZTE Blade C2 Plus (C570) Firmware Flash File Download [Stock Rom]
The ZTE Blade C2 Plus (model C570) is a basic, entry-level 3G smartphone from 2017. For owners of this older device, flashing the official stock firmware is the best way to resolve deep software corruption, fix a device stuck in a bootloop, or restore a phone that has become completely unresponsive to its original factory condition.
Important Note: The filename for this package is incorrectly labeled with “SPD.” The ZTE Blade C2 Plus is powered by a MediaTek MT6580M chipset, not a UNISOC/Spreadtrum chip. Therefore, the correct restoration process requires the SP Flash Tool. Following the guide for the device’s actual hardware is essential.
Quick Device Specs
- Device
- ZTE Blade C2 Plus (C570)
- Release year
- 2017
- Chipset
- MediaTek MT6580M
- Display
- 5.0″ FWVGA TFT (854×480)
- Battery
- 2300 mAh (Removable)
- Memory
- 1GB RAM + 8GB storage
- Camera
- 5MP rear, 2MP front
- OS
- Android 6.0 (Marshmallow)
Required Downloads
| File / Tool | Download Link |
|---|---|
| SP Flash Tool | Download Tool |
| MediaTek USB VCOM Drivers | Download Drivers |
Stock ROM & Firmware
| Version | Android | Region | Type | Download | Size |
|---|---|---|---|---|---|
| (2018-01-18) | 6.0 (Marshmallow) | Global | SP Flash Tool | Download | ~900 MB |
Quick Flashing Guide
- Download and install the MediaTek VCOM drivers and the SP Flash Tool on your computer.
- Extract the downloaded firmware ZIP file to find the `MT6580_Android_scatter.txt` file.
- Launch SP Flash Tool, load the scatter file, and ensure the flashing mode is set to “Download Only.”
- Power off your phone, remove the battery, click the “Download” button in the tool, and then connect the phone to your PC via USB to begin.
For a complete, step-by-step tutorial with screenshots, please refer to our definitive guide:
How to Flash Stock Firmware on MediaTek (MTK) Smartphones
FAQs
Q1. Why does the filename say “SPD” but the guide uses “SP Flash Tool”?
The original uploader mislabeled the file. The ZTE Blade C2 Plus is confirmed to use a MediaTek MT6580M chipset, which exclusively uses the SP Flash Tool. Following the correct guide for the phone’s actual hardware is essential to avoid flashing errors.
Q2. Can I install modern apps on this phone?
Due to the 1GB of RAM and old Android 6.0 OS, most modern apps from the Play Store will not run well, if at all. This phone is best suited for basic tasks and “Lite” versions of apps. A firmware flash restores the original system but does not upgrade its capabilities.
Q3. How can I manage the extremely limited 8GB of storage?
The 8GB of storage is the biggest bottleneck. It is essential to use a microSD card. Android Marshmallow has a feature called “Adoptable Storage” which allows you to format an SD card to act as internal memory. You can set this up in `Settings > Storage & USB`.
Device-Specific Troubleshooting
- “Insufficient Storage” Errors: Even with adoptable storage, the phone may struggle. After flashing, immediately go to `Settings > Apps` and disable any pre-installed bloatware to free up precious system space for essential app updates like Google Play Services.
- Phone Not Charging or Charging Very Slowly: On a device this old, charging issues are often hardware-related (a worn-out micro-USB port or a degraded battery). A firmware flash can fix software bugs that prevent charging, but if the problem persists after a clean flash, the hardware is likely the cause.
- Sudden Death / Won’t Turn On: If your phone suddenly died, a full firmware flash with SP Flash Tool is the only software solution that might revive it. If the tool can detect the phone, there is a chance of success. If it’s still dead after a successful flash, the internal storage (eMMC) has likely failed due to age and wear.
- SP Flash Tool Doesn’t Detect the Phone: This is a driver issue. Reinstall the VCOM drivers (disabling driver signature enforcement in Windows first). The removable battery is your best tool: remove it, click “Download” in SP Flash Tool, then connect the phone without the battery. Once the red bar appears, you can re-insert it.
