ZTE Prestige (N9132) Firmware Flash File Download [Stock Rom]
The ZTE Prestige (model N9132) is an entry-level 4G LTE smartphone from 2015, sold by US prepaid carriers like Boost Mobile and Virgin Mobile. For owners of this device, flashing the official stock firmware is the definitive solution for fixing critical software errors, especially the common “dm-verity” corruption error, resolving bootloops, and restoring the phone to its original factory state.
Important Note: This device is powered by a Qualcomm Snapdragon 210 chipset. The restoration process requires the use of the QFIL (Qualcomm Flash Image Loader) tool and booting the device into EDL Mode.
Quick Device Specs
- Device
- ZTE Prestige (N9132)
- Release year
- 2015
- Chipset
- Qualcomm Snapdragon 210
- Display
- 5.0″ FWVGA TFT (854×480)
- Battery
- 2300 mAh (Removable)
- Memory
- 1GB RAM + 8GB storage
- Camera
- 5MP rear, 2MP front
- OS
- Android 5.1 (Lollipop)
- Carriers
- Boost Mobile, Virgin Mobile (USA)
Required Downloads
| File / Tool | Download Link |
|---|---|
| QPST (QFIL) Tool | Download QPST Tool |
| Qualcomm USB Drivers | Download Drivers |
Stock ROM & Firmware
| Version | Android | Carrier | Type | Download | Size |
|---|---|---|---|---|---|
| (2018-06-11) | 5.1 (Lollipop) | Boost Mobile | QFIL / QPST | Download | ~1.0 GB |
Quick Flashing Guide
- Download and install the Qualcomm USB Drivers and the QPST Tool on your PC.
- Extract the downloaded firmware ZIP file to a folder on your computer.
- Power off your ZTE Prestige (remove and re-insert the battery) and boot it into EDL Mode by holding the Volume Up + Volume Down buttons while connecting it to the PC via USB cable.
- Launch QFIL, load the firmware files (`prog_…mbn` and `rawprogram/patch` XMLs), and click the “Download” button to begin flashing.
For a complete, step-by-step tutorial with screenshots, please refer to our definitive guide:
How to Flash Firmware on Qualcomm Smartphones with QFIL
FAQs
Q1. My phone is stuck at boot with a “dm-verity verification failed” error. Will this fix it?
Yes, absolutely. The “dm-verity” error means the system partition is corrupt, a very common issue on the ZTE Prestige. Flashing this full stock firmware with QFIL is the standard and most effective way to rewrite the system and resolve this specific error.
Q2. Will this firmware remove the Boost Mobile network lock?
No. This is the official carrier stock firmware. It will restore the original software but will not remove the SIM lock. The device will remain locked to its original carrier’s network.
Q3. Why can’t I install many apps after flashing?
The ZTE Prestige has only 8GB of internal storage, most of which is used by the operating system. This firmware restores the phone to its original state, but you must use a microSD card for all photos and media, and be extremely selective about which apps you install to avoid running out of space.
Device-Specific Troubleshooting
- Stuck on the Boost Mobile Logo: This is the most common bootloop issue for the Prestige. The definitive fix is to flash the stock firmware using the QFIL guide. After the flash completes successfully, be patient as the first boot can take 10-15 minutes. If it’s still stuck, boot into recovery mode (hold Volume Up + Power) and perform a “Wipe data/factory reset”.
- Random Reboots or Freezing: These are signs of software instability on an aging device. A full firmware flash with QFIL will install a fresh, clean copy of the operating system, which should resolve these crashes and improve overall stability.
- QFIL Fails with a “Sahara/Firehose” Error: This classic QFIL error points to a communication failure, usually caused by a driver problem. Reinstall the Qualcomm 9008 drivers (disabling driver signature enforcement in Windows first). The removable battery helps: remove it, enter EDL mode, then connect the phone.
- “Invalid SIM” error: This message is expected if you insert a SIM card from a carrier other than Boost Mobile or Virgin Mobile (or the Sprint network). The phone is network-locked.
