Crucial Warning: This firmware is strictly for the Qualcomm Snapdragon 400 MSM8226 variant (ME175KG / K00S / MIRA). Do not attempt to flash this package onto the Wi-Fi only MediaTek MT8125 model (ME173X), as the bootloader and partition layouts are completely incompatible and will hard-brick the device.
Official ASUS MeMO Pad HD 7 (ME175KG) Firmware Releases
Official Factory PreBurn & RAW Fastboot Firmware 1 package
Asus_Memo_Pad_HD7_ME175KG_V10.11.3.17_F2.11.23_OPEN_140110_PreBurn_MSM8226_H26M42003GMR_8G_MIRA.zip
Official factory PreBurn raw partition package for Qualcomm MSM8226 Snapdragon 400 boards with 8 GB SK Hynix eMMC memory. Suitable for unbricking and clean factory flashing.
⬇️ Download via Google DriveQuick Step-by-Step Restoration Overview
- Download and Unpack Firmware Archive
- Install Qualcomm and ASUS USB Drivers
- Reboot Tablet to Fastboot CSC Mode
- Connect via USB and Execute Flashing Script
- Reboot and Complete Initial Setup
Essential Pre-Flash Hardware and Driver Checklist
- 1. Ensure your tablet battery has at least 50% charge to prevent abrupt shutdowns during partition writing.
- 2. Confirm your hardware model says ME175KG or K00S on the rear casing or under Settings > About Tablet.
- 3. Install the official ASUS USB and Qualcomm HS-USB QDLoader drivers on your PC.
- 4. Use a reliable microUSB cable connected directly to a rear motherboard USB 2.0 port rather than an external hub.
- 5. Back up essential photos, documents, and media to a microSD card or PC before flashing, as factory restoration completely formats user storage.
Qualcomm Hardware Compatibility and Variant Separation
Factory PreBurn package includes raw partition images for eMMC programming and recovery via Fastboot or emergency download mode.
Ready to Flash This Firmware?
Full step-by-step instructions for ASUS MeMO Pad HD 7 Dual SIM (ME175KG), including prerequisites, error fixes, and screenshots, are on FlashGuideHub's ASUS Flash Tool guide.
Can also be flashed via Fastboot: Open Fastboot Guide →
Frequently Asked Questions About ME175KG Firmware
The MeMO Pad HD 7 Dual SIM (ME175KG / K00S) runs on a Qualcomm Snapdragon 400 MSM8226 platform with integrated dual-SIM GSM and 3G cellular modems capable of cellular voice calling. In contrast, the standard MeMO Pad HD 7 (ME173X) is a Wi-Fi only tablet powered by a MediaTek MT8125 quad-core chip. Flashing firmware between these two models will result in a hard brick because partition tables, kernel modules, and hardware architectures share zero compatibility.
The PreBurn designation in the package name Asus_Memo_Pad_HD7_ME175KG_V10.11.3.17_F2.11.23_OPEN_140110_PreBurn_MSM8226_H26M42003GMR_8G_MIRA.zip indicates that this is an official ASUS factory production archive. Unlike standard consumer OTA update packages, PreBurn packages contain raw partition binaries, partition tables, and low-level images designed to program clean eMMC chips (such as the 8 GB SK Hynix H26M42003GMR) during factory manufacturing and unbrick devices with corrupted partitions.
The standard factory PreBurn flashing script writes the system, boot, recovery, and user data partitions while deliberately preserving the modem NVRAM and modemst1/modemst2 partitions where unique IMEI and radio frequency calibration data reside. However, if your tablet was completely erased via low-level Qualcomm emergency programmer formatting, you may need to restore a previous QCN NVRAM backup to regain cellular network connectivity.