Crucial Warning: Verify your exact hardware model under Settings > About Phone or on the rear label. Packages on this page are engineered exclusively for the ROG Phone II (model ZS660KL / ASUS_I001D). Never flash these packages onto the original ROG Phone (ZS600KL) or the newer ROG Phone 3 (ZS661KS), as mismatched bootloader and radio firmware will result in an unrecoverable hard brick.
ASUS ROG Phone II Official Firmware & Service Packages (ZS660KL)
Official Android 11 Firmware (Final Release) 1 package
UL-ASUS_I001_1-ASUS-18.0210.2201.215-1.1.1-user.zip
Final official stock Android 11 firmware release for the ASUS ROG Phone II. Includes latest security patches and ROG UI gaming optimizations.
MD5: c6dc9cae7055b2733ef65ce59ea0a271
Official Android 10 Firmware & Service Packages 2 packages
Asus_Rog_Phone_II_ZS660KL_WW_ZS660KL_17.0240.2103.75_M3.23.44.19-ASUS_1.1.229_AFT.zip
Official ASUS Flash Tool (AFT) RAW Fastboot service archive for deep unbricking, partition repair, and clean factory reinstallation.
⬇️ Download via Google DriveUL-ASUS_I001_1-ASUS-17.0240.2108.103-1.1.234-user.zip
Final official Android 10 maintenance release for ROG Phone II. Features optimized touch sampling and thermal management profiles.
MD5: 52c65563c25f0d6498f936a0a5650414
Official Android 9.0 (Pie) Firmware 1 package
UL-ASUS_I001_1-ASUS-16.0631.1910.64-1.1.253-user.zip
Official Android 9.0 Pie launch stock firmware package. Ideal for rolling back modifications or restoring original launch performance.
MD5: 060a1e79c8cc89756475e87a5494c422
Standard Recovery & Storage Update Procedure
- Download matched official firmware package
- Copy firmware file to internal storage root
- Disconnect USB and trigger update prompt
- Alternative: Install via stock recovery menu
- Wait for installation and reboot
Pre-Flash Hardware Verification & Port Safety
- Verify your device model code in Fastboot mode using fastboot getvar product to confirm the ASUS_I001D hardware identity.
- Make sure your 6,000 mAh battery has at least 50% charge before initiating any firmware installation or unbrick procedure.
- If updating via internal storage: copy the UL-ASUS_I001_1-*.zip file directly to the root directory without renaming it.
- If flashing via computer: install ASUS Android USB drivers on your Windows PC and connect to the side-mounted USB-C port to ensure stable communication.
- Connect using a certified USB Type-C data cable plugged directly into a rear motherboard USB 2.0 port to prevent communication drops.
Snapdragon 855+ Platform Architecture & Regional Channel Taxonomy
Official ASUS user update packages (UL-*.zip) flash through stock recovery without requiring an unlocked bootloader. Placing the file in the root directory of internal storage triggers an automatic update prompt.
Ready to Flash This Firmware?
Full step-by-step instructions for ASUS ROG Phone II / ROG Phone 2, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's ASUS Flash Tool guide.
Can also be flashed via ADB Sideload: Open ADB Sideload Guide →
Hardware Architecture & Flashing Clarifications
The Tencent Edition (China market) and Worldwide (Global/UK) variants share the same underlying Qualcomm Snapdragon 855+ silicon and ZS660KL motherboard. However, the Tencent Edition shipped with an 18W charger (instead of 30W HyperCharge), omitted certain international 4G bands such as LTE Band 20 (800 MHz), and ran Chinese firmware. Many third-party sellers cross-flashed Worldwide ROMs onto Tencent hardware, which can cause bootloops during official FOTA updates if partition signatures do not match.
The ROG Phone II features two independent USB Type-C ports: a standard USB 2.0 port on the bottom edge and a proprietary 48-pin dual-port connector on the left side (incorporating a full-speed USB 3.1 Gen 2 interface and DisplayPort 1.4). When connecting to a PC for ASUS Flash Tool or Fastboot operations, using the side-mounted orange USB-C connector provides the most stable communication pathway and avoids potential loose-contact issues common on heavily used bottom ports.
The ROG Phone II utilizes a Google Virtual A/B dual-slot partition architecture. When you install an official update package (UL-*.zip), the system automatically flashes the inactive slot in the background and switches slots upon reboot. If flashing custom recoveries or kernel modifications via Fastboot, you must verify which slot is active ("fastboot getvar current-slot") to prevent slot mismatch bootloops.