Crucial Warning: Confirm your tablet model and region code before flashing. Check your current build number in Settings -> About Tablet -> Build Number. The letters represent the model (e.g. CMR-W09) and the 'C' number represents the regional software branch (e.g. C432 for Europe, C636 for Asia, C10 for Russia). Flashing a package with a mismatched region code will fail verification in recovery mode.
Download Firmware for Huawei MediaPad M5 10.8 / M5 Pro
Huawei_MediaPad_M5_10.8_CMR-W09_HW_EU_HLRCF_9.1.0.332_C432E5R1P3T8_Dload.zip
Final official EMUI 9.1 maintenance release for the European Wi-Fi model CMR-W09. Complete dload package.
⬇️ Download via MediaFireHuawei_MediaPad_M5_10.8_CMR-W09A_HW_EU_HLRCF_9.1.0.332_C432E5R1P3T8_Dload.zip
Official EMUI 9.1 dload update for the European CMR-W09A hardware variant.
⬇️ Download via MediaFireHuawei_MediaPad_M5_10.8_CMR-AL09_8.0.0.193_C432_HW_EU_Firmware_8.0.0_R1_EMUI8.0_05014XYC_Dload.zip
Official factory service dload firmware for the European 4G LTE model CMR-AL09 on EMUI 8.0.
⬇️ Download via Google DriveCameron-W19B 8.0.0.192(C636)_Firmware_8.0.0_r1_EMUI8.0_05015BGX.rar
Official stock firmware for the MediaPad M5 Pro Wi-Fi model (CMR-W19 / W19B) for Asia-Pacific regions (C636).
⬇️ Download via MediaFireHuawei_MediaPad_M5_Pro_CMR-AL19_9.0.1.185C10E3R1P3T8_Dload.zip
Official EMUI 9.0 dload firmware for the MediaPad M5 Pro 4G LTE model CMR-AL19 for region C10.
⬇️ Download via Google DriveFlashing Overview for Huawei MediaPad M5 10.8 / M5 Pro
- Check your tablet model (CMR-W09, CMR-AL09, or Pro models) and region code (C432, C636, C10)
- Format a microSD card (or USB Type-C OTG flash drive) as FAT32 or exFAT
- Create a folder named "dload" in the root directory of the storage card
- Extract the firmware archive and copy UPDATE.APP inside the dload folder
- Power off the tablet completely and insert the microSD card
- Press and hold Volume Up + Volume Down + Power buttons together until update starts
- Leave the tablet untouched while EMUI verifies the package and writes partitions
- The tablet will display a success checkmark and reboot automatically into Android
Expand preparation checklist for Huawei MediaPad M5 10.8 / M5 Pro
- Check your tablet model number (e.g. CMR-W09 or CMR-AL09) and region code (e.g. C432) in Settings or on the back cover.
- Charge the tablet battery to at least 40% before flashing.
- Format a microSD card (or USB Type-C OTG flash drive) to FAT32 or exFAT.
- Create a folder named exactly 'dload' (all lowercase) in the root of the microSD card.
- Extract the downloaded archive and copy the UPDATE.APP file (along with any carrier/data update folders) inside the dload folder.
- Back up all personal files, as the dload recovery flash will erase internal storage.
Compatibility & Bootloader Notes
Flashing official signed UPDATE.APP packages through the Huawei dload recovery method does not require an unlocked bootloader. Packages must match your tablet model and regional cust code (such as C432 for Europe, C636 for Asia, or C10 for Russia).
Ready to Flash This Firmware?
Full step-by-step instructions for Huawei MediaPad M5 10.8 / M5 Pro, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Huawei UPDATE.APP guide.
Can also be flashed via Huawei eRecovery: Open Huawei eRecovery Guide →
Frequently Asked Questions
CMR-W09 is the Wi-Fi only version of the MediaPad M5 10.8. CMR-AL09 is the 4G LTE cellular version, which includes a SIM card slot for mobile network connectivity. Their baseband and radio partitions differ, so always flash the file matching your model.
The MediaPad M5 Pro includes hardware digitizer support for the Huawei M-Pen stylus with 4096 levels of pressure sensitivity. Standard M5 10.8 models (CMR-W09/AL09) do not support the active M-Pen stylus.
The most common cause is a region code mismatch (for example, attempting to flash a C432 European package on a C636 Asian tablet) or an incompatible model version. Make sure your microSD card is formatted properly and UPDATE.APP is placed directly inside the "dload" folder.
Yes. Format a USB Type-C flash drive (or a regular USB drive with a Type-C OTG adapter) as FAT32 or exFAT, create the "dload" folder with UPDATE.APP inside, connect it to the tablet, and use the 3-button combo (Volume Up + Volume Down + Power).