Crucial Warning: Do not cross-flash packages between model sub-variants. While the A51w, A51f, and China A51 utilize the same Snapdragon 410 processor, the A51w employs a 540x960 qHD display panel, whereas the A51f and A51 incorporate 720x1280 HD display digitizers. Flashing an A51w package onto an A51f or A51 will cause a black screen with no backlight or an unrecoverable kernel panel panic.
Download %s Stock ROM Firmware
Oppo Mirror 5 (A51w Global / International) 2 packages
Oppo_Mirror_5_A51W_EX_11_A.16_160815.zip
Final official maintenance release for international Oppo Mirror 5 A51w. Includes rawprogram0.xml and patch0.xml for QFIL.
⬇️ Download (2 links)
Oppo_Mirror_5_A51W_EX__11_A.05_150731_QPST.zip
Initial release firmware package configured specifically for QPST and QFIL restore on international A51w hardware.
⬇️ Download via MediaFireOppo Mirror 5 / 5s (A51f International / South Asia) 1 package
A51fEX_11_A.10_160304.tar.bz2
Factory service package for model A51f with 720p HD panel drivers. Extract TAR.BZ2 with 7-Zip to access the raw flash images.
MD5: 1a673ebbdea6f062c268ada4696c662a
Oppo A51 (China Domestic) 1 package
Oppo_A51_051215_QPST.zip
China domestic carrier edition. Requires QPST/QFIL in EDL 9008 mode. Does not contain Google Play services.
⬇️ Download via Google Drive5-Step %s Stock Firmware Restoration
- Download and extract matching A51w or A51f firmware archive
- Install Qualcomm HS-USB QDLoader 9008 drivers on Windows PC
- Open QFIL, select Flat Build, and load Firehose programmer and XMLs
- Connect phone in Qualcomm EDL 9008 mode using Volume Up and Down keys
- Execute Download in QFIL and wait for finish message before rebooting
Pre-Flash Hardware Checks & Driver Setup for %s
- • Verify your exact model code (A51w, A51f, or A51) from the regulatory text underneath the back cover or in Settings > About Phone.
- • Ensure the non-removable 2420mAh Lithium-Polymer battery holds at least 50% charge to prevent a power brownout while flashing eMMC partitions.
- • Install the Qualcomm HS-USB QDLoader 9008 drivers on a 64-bit Windows PC before connecting the device.
- • Use a quality microUSB data cable and connect directly to a rear motherboard USB 2.0 port to avoid Sahara communication dropouts.
- • Unpack firmware archives like Oppo_Mirror_5_A51W_EX_11_A.16_160815.zip using 7-Zip to extract prog_emmc_firehose_8916.mbn, rawprogram0.xml, and patch0.xml.
- • Back up your contacts, photos, and messages if the device can still boot, as an EDL flash completely rewires userdata.
Hardware Differences Across A51w, A51f, and China A51
Flashing via Qualcomm EDL (Emergency Download 9008) mode communicates directly with the MSM8916 boot ROM and does not require an unlocked bootloader.
Ready to Flash This Firmware?
Full step-by-step instructions for OPPO Mirror 5, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's QFIL guide.
Can also be flashed via MSM Download Tool: Open MSM Download Tool Guide →
Technical & Archival Firmware Questions
While all three models use the Qualcomm Snapdragon 410 (MSM8916) platform, the primary difference lies in the display panel resolution and modem radio frequency bands. The international A51w features a 5.0-inch 540x960 qHD screen and global FDD-LTE bands. The A51f (marketed in some regions as Mirror 5s) and China A51 incorporate a higher-resolution 720x1280 HD screen. Flashing an A51w package onto an A51f or China A51 causes display driver failure because the kernel device tree does not match the LCD controller.
The firmware packages use the Qualcomm Firehose programmer file prog_emmc_firehose_8916.mbn along with rawprogram0.xml and patch0.xml. These XML definition files map out the 16GB eMMC 4.5 flash memory, writing essential boot partitions including sbl1, aboot (Little Kernel bootloader), rpm, tz, modem (NON-HLOS.bin radio firmware), boot (kernel and ramdisk), recovery, system, and userdata.
Oppo factory service repositories originally compressed internal technician firmware builds into .tar.bz2 archives for Unix-based factory flashing terminals. To use this package on a Windows computer with QFIL, open 7-Zip, unpack the .tar.bz2 archive to produce the intermediate .tar file, and then unpack the .tar file into a standard folder containing the raw XML scripts and binary partition images.
No. Qualcomm Emergency Download (EDL 9008) mode operates directly inside the primary boot ROM of the MSM8916 silicon before the secondary Android bootloader (aboot) initializes. Because the processor authenticates the Firehose programmer directly, flashing in EDL mode bypasses Android bootloader security checks and functions whether the bootloader is locked or unlocked.