Crucial Warning: When flashing Fastboot packages via Mi Flash Tool on this China-exclusive device (2204119EC), always make sure "clean all" (flash_all.bat) is highlighted at the bottom right. NEVER choose "clean all and lock" (flash_all_lock.bat) on imported or modified setups. Relocking the bootloader on unofficial firmware or cross-region modifications triggers an immediate hardware lockout with the warning "The system has been destroyed", requiring authorized EDL service intervention.
Download Xiaomi CIVI 1S (zijin) Stock ROM Firmware
China Official Fastboot Factory Packages (HyperOS 1.0) 1 package
zijin_images_OS1.0.12.0.ULPCNXM_20250212.0000.00_14.0_cn_9001687e75.tgz
Final official China Stable Fastboot factory package based on Android 14.0 and Xiaomi HyperOS 1.0. Requires an unlocked bootloader and modern fastboot binaries to write dynamic partitions.
MD5: 9001687e75fb9db45159b7ec569fab74
China Official Recovery Packages (HyperOS 1.0) 1 package
miui_ZIJIN_OS1.0.12.0.ULPCNXM_cac67dee4a_14.0.zip
Final official China Stable Recovery package for HyperOS 1.0. Can be flashed via stock Mi Recovery sideload or installed through the internal system updater.
MD5: cac67dee4aae6448a41a5dc0ad42f971
Custom Recovery Images (TWRP Ramdisk for Android 12 / 13 / 14) 1 package
twrp-3.7.0_12-0-zijin-chilan666.img
Custom TWRP recovery compiled by developer chilan666 with Android 12, 13, and 14 decryption support. Because zijin has no dedicated physical recovery partition, boot it via "fastboot boot" and install to the active boot ramdisk.
⬇️ Download via Direct LinkXiaomi CIVI 1S Fastboot Flashing Steps & Overview
- Authorize bootloader unlock via Xiaomi Community Mi Unlock tool and verify status with fastboot getvar unlocked
- Unpack the official zijin_images_OS1.0.12.0.ULPCNXM TGZ archive twice with 7-Zip to reveal flash_all.bat
- Cold boot the CIVI 1S into Fastboot mode by pressing Volume Down and Power until the orange text displays
- Launch Mi Flash Tool, load the unpacked directory, and strictly confirm clean all (flash_all.bat) is active
- Execute the flash script over a rear motherboard USB port and allow 5 to 8 minutes for the initial HyperOS setup
Pre-Flash Hardware Checks & Driver Setup for Xiaomi CIVI 1S
- Verify your bootloader status by rebooting to Fastboot mode and checking with "fastboot getvar unlocked".
- Check your hardware Anti-Rollback index before attempting a downgrade by executing "fastboot getvar anti" (HyperOS packages declare ARB index 1).
- Confirm Virtual A/B partition state using "fastboot getvar current-slot" to ensure your active slot (_a or _b) receives clean partition tables.
- Extract the official Fastboot archive zijin_images_OS1.0.12.0.ULPCNXM_20250212.0000.00_14.0_cn_9001687e75.tgz twice using 7-Zip to reveal the raw partition images and flash_all.bat batch script.
- Ensure the internal 4,500 mAh battery holds at least 50% charge to prevent unexpected power loss during multi-gigabyte UFS 2.2 dynamic super partition writes.
- If the phone is deeply drained or unresponsive, charge for 30 minutes via a 55W or standard USB-PD charger before initiating Fastboot mode.
- In total unbrick scenarios where the bootloader is corrupted and Fastboot is unreachable, Qualcomm EDL 9008 test points located near the mainboard flex connector can be bridged, though flashing requires authorized Xiaomi service credentials.
Xiaomi CIVI Series Hardware Differences & Codename Guide
Bootloader unlocking through the official Xiaomi Community Mi Unlock tool is mandatory before flashing Fastboot packages. Flashing factory images on a locked bootloader will be rejected by fastboot security.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi CIVI 1S, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via Fastboot: Open Fastboot Guide →
Xiaomi CIVI 1S Technical Architecture & Hardware FAQs
The Xiaomi CIVI 1S (zijin) is powered by the Qualcomm Snapdragon 778G+ 5G mobile platform (part number SM7325-AE) manufactured on TSMC's 6nm process. Compared to the standard Snapdragon 778G (SM7325) used in the original CIVI (mona), the prime Cortex-A78 CPU core clock frequency is bumped from 2.40 GHz to 2.50 GHz, and the Adreno 642L graphics processor operates at higher clock speeds, offering roughly 20% faster graphics rendering. While both handsets share the same physical 6.98mm chassis footprint and 6.55-inch curved display, their low-level device trees, modem configurations, and firmware packages are strictly incompatible.
The Xiaomi CIVI 1S features a 32MP front-facing selfie camera utilizing the Samsung S5KGD2 sensor with phase detection autofocus (PDAF) and an f/2.4 aperture. To assist low-light photography, two physical micro-slit soft LED flash lights are discreetly integrated into the upper display bezel. On the rear, the handset houses a triple-lens array comprising a 64MP primary sensor (f/1.8, PDAF), an 8MP ultra-wide sensor (120-degree field of view, f/2.2), and a 2MP macro sensor (f/2.4).
The CIVI 1S incorporates dual-channel LPDDR4X RAM running at 2133 MHz paired with dual-lane UFS 2.2 non-volatile storage in 8GB+128GB, 8GB+256GB, and 12GB+256GB configurations. It does not provide an external microSD card expansion slot. Flashing the official HyperOS 1.0 Fastboot package formats and writes logical blocks (system, system_ext, product, and vendor) into the shared dynamic super container across the UFS 2.2 controller.
The build identifier follows Xiaomi's official firmware nomenclature: "OS1.0" denotes Xiaomi HyperOS version 1.0; the letter "U" designates the underlying Android 14 operating system base; "LP" represents the hardware platform code assigned to the Xiaomi CIVI 1S (zijin); "CN" corresponds to the China regional software channel; and "XM" signifies unlocked public retail distribution.