Crucial Warning: These packages carry the ULN / rubens identifier and belong strictly to model 22041211AC. Never flash firmware meant for sibling models such as the Dimensity 9000 Redmi K50 Pro (matisse), Snapdragon 8 Gen 1 Redmi K50 Gaming / POCO F4 GT (ingres), Snapdragon 8+ Gen 1 Redmi K50 Ultra / Xiaomi 12T Pro (diting), or Dimensity 8100 LCD-equipped Redmi K50i / POCO X4 GT (xaga). Always select "clean all" (flash_all.bat) inside Mi Flash Tool and avoid "clean all and lock" on modified partitions.
Redmi K50 (rubens) Stock Firmware & Recovery Downloads
China Stable HyperOS 2.0 Fastboot Release (OS2.0.5.0.ULNCNXM) 1 package
rubens_images_OS2.0.5.0.ULNCNXM_20250429.0000.00_14.0_cn_d501afff82.tgz
Official China Stable HyperOS 2.0 factory Fastboot package on Android 14.0. Extract twice with 7-Zip to reveal flash_all.bat and the images directory.
MD5: d501afff822ee13bd2484c780a483fdd
China Stable HyperOS 2.0 Recovery OTA Update (OS2.0.5.0.ULNCNXM) 1 package
rubens-ota_full-OS2.0.5.0.ULNCNXM-user-14.0-ff82bed26d.zip
Official full OTA recovery update package for China Stable HyperOS 2.0. Install via the built-in system updater or stock Mi Recovery.
MD5: ff82bed26dd0f5b05057c7040c7397c2
Official Xiaomi.eu Multilingual MIUI 13 Fastboot Custom ROM 1 package
xiaomi.eu_multi_RUBENS_V13.0.24.0.SLNCNXM_v13-12-fastboot.zip
Official stable Xiaomi.eu multilingual custom ROM with integrated Google Play Services. Discontinued for MIUI 14 and HyperOS due to closed MediaTek BSPs.
⬇️ Download via MIUI OTACommunity Custom Recovery Vendor Boot Ramdisk (Fastboot) 1 package
vendor_boot.img
Dedicated Fastboot flashable vendor_boot recovery image. Flash using fastboot flash vendor_boot vendor_boot.img; do not execute fastboot boot vendor_boot.img.
⬇️ Download via Direct Link5-Step Redmi K50 Stock Firmware Restoration Overview
- Confirm model 22041211AC has an unlocked bootloader verified through China Xiaomi account status
- Extract rubens_images_OS2.0.5.0.ULNCNXM_20250429.0000.00_14.0_cn_d501afff82.tgz twice to C:\rubens_fw\
- Boot device into Fastboot mode (Volume Down + Power) and verify detection with fastboot devices
- Select C:\rubens_fw\ inside Mi Flash Tool and verify "clean all" (flash_all.bat) is highlighted
- Execute flash and allow userspace fastbootd to write dynamic super partitions without disconnecting
Pre-Flash Hardware Checks & Driver Setup for rubens
- Confirm your hardware board is 'rubens' (model 22041211AC, Dimensity 8100, 2K AMOLED) by executing fastboot getvar product from your terminal before flashing.
- Verify the integrity of downloaded files using MD5 checksums (e.g. d501afff822ee13bd2484c780a483fdd for the 6.84 GB Fastboot tgz) before starting partition flashing.
- Check the anti-rollback index with fastboot getvar anti to verify your rollback counter prior to any downgrade attempts.
- Extract rubens_images_OS2.0.5.0.ULNCNXM_20250429.0000.00_14.0_cn_d501afff82.tgz twice using 7-Zip directly into C:rubens_fw so flash_all.bat sits at the folder root.
- On Dimensity 8100 (MT6895), custom recovery must be flashed to the vendor_boot partition (fastboot flash vendor_boot vendor_boot.img); never execute fastboot boot vendor_boot.img as the bootloader rejects direct RAM booting and triggers bootloops.
- Ensure the 5,500 mAh battery holds at least 50% charge and connect using an original Type-C data cable to a rear motherboard USB 2.0 port on 64-bit Windows.
Redmi K50 (rubens) vs Sibling K50 Platform Disambiguation
Fastboot flashing via flash_all.bat requires an officially unlocked bootloader tied to a China Xiaomi account. MediaTek Dimensity 8100 BROM recovery also enforces signed Xiaomi SLA/DA authentication on locked devices.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi Redmi K50, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via Fastboot: Open Fastboot Guide →
Redmi K50 Architecture, Build Codes & Partition FAQ
The Redmi K50 (rubens, model 22041211AC) is powered by MediaTek's Dimensity 8100 octa-core SoC (TSMC 5nm, MT6895Z/CZA) paired with an ARM Mali-G610 MC6 GPU, LPDDR5 RAM, and UFS 3.1 storage. Unlike its Qualcomm-based siblings, it features a Samsung E4 2K WQHD+ (3200x1440) 120Hz AMOLED panel and was distributed solely inside mainland China without official Global or European retail variants.
Under Xiaomi's HyperOS naming standard: "OS2.0" identifies the HyperOS generation; "U" represents Android 14 as the underlying base operating system; "LN" is the two-character hardware codename designator assigned to the Redmi K50 (rubens); "CN" indicates the China domestic firmware branch; and "XM" designates standard open retail channel distribution.
The Redmi K50 uses Google's System-as-Root (SAR) and Virtual A/B (V/AB) partition architecture with dynamic partitions. Inside the flash package, the single dynamic super.img container houses logical sub-partitions including system, system_ext, product, and vendor, which are unpacked and written during the userspace fastbootd stage of flashing.
On Google Android 12+ Virtual A/B architectures powered by MediaTek MT6895, the recovery ramdisk is separated from the generic boot partition and relocated into the vendor_boot partition. Installing custom recovery requires writing directly via "fastboot flash vendor_boot vendor_boot.img", because executing "fastboot boot <image>.img" is unsupported by the bootloader and causes soft-brick bootloops.
Redmi K50 (rubens) runs on Dimensity 8100 with a 2K AMOLED screen and 67W charging. In contrast, the Redmi K50 Pro (matisse) features the higher-end MediaTek Dimensity 9000 with 120W charging and a 108 MP main sensor. Meanwhile, the Redmi K50i / POCO X4 GT (xaga) uses the Dimensity 8100 but swaps the 2K AMOLED panel for a 144Hz Full HD+ LCD and houses a different partition table.