Crucial Warning: These firmware packages are designed strictly for the Xiaomi Pad 5 Pro 5G (enuma / M2105K81C). Do not flash these files onto the Wi-Fi-only Pad 5 Pro (elish), the standard Pad 5 (nabu), or the Pad 5 Pro 12.4 (dagu). Cross-flashing across mismatched baseband or display hardware can result in bootloops or baseband corruption. When flashing via Mi Flash Tool, always select "clean all" (flash_all.bat) and avoid "clean all and lock".
Xiaomi Pad 5 Pro 5G Official Firmware & Recovery Downloads
Official Xiaomi HyperOS Stock Firmware 2 packages
enuma_images_OS1.0.3.0.TKZCNXM_20240508.0000.00_13.0_cn_fc06cc99cc.tgz
Official China mainland factory Fastboot image for model M2105K81C. Clean factory restore and unbrick package for UFS 3.1 storage.
MD5: fc06cc99cc67649c61917638667ae67c
miui_ENUMA_OS1.0.3.0.TKZCNXM_e1128c5324_13.0.zip
Official China mainland Recovery OTA update package for on-device updater installation or stock recovery sideloading.
MD5: e1128c5324d5bdfcee153695109a849f
Custom Recovery & Kernel Ramdisk Images 4 packages
OrangeFox-R11.3_A16-Unofficial-elish.zip
Unified flashable OrangeFox recovery installer ZIP for elish/enuma tablet platform. Supports dynamic partition decryption and display scaling.
⬇️ Download via Direct LinkOrangeFox-R11.3_A16-Unofficial-elish.img
Bootable / flashable kernel ramdisk image. Boot via "fastboot boot OrangeFox-R11.3_A16-Unofficial-elish.img" without overwriting factory boot.
⬇️ Download via Direct LinkOrangeFox-R11.3_A15-Unofficial-elish.zip
Stable OrangeFox recovery installer ZIP tailored for Android 13 HyperOS 1.0 and MIUI 14 firmware branches.
⬇️ Download via Direct Linkboot.img
Dedicated stock kernel boot ramdisk dump extracted from official enuma OS1.0.3.0.TKZCNXM firmware. Used to restore stock boot if patched.
⬇️ Download via Direct LinkXiaomi Pad 5 Pro 5G Fastboot Flashing Steps & Overview
- Unlock the tablet bootloader using the official Xiaomi Mi Unlock tool with an authorized Mi Account.
- Decompress the official enuma_images_OS1.0.3.0.TKZCNXM .tgz archive twice using 7-Zip until flash_all.bat appears.
- Power off the tablet and hold Volume Down and Power together until the FASTBOOT screen appears.
- Launch Mi Flash Tool, browse to the extracted firmware folder, and choose clean all at the bottom right.
- Click Flash and keep the USB cable connected until the status column confirms success and the tablet reboots.
Pre-Flash Hardware Checks & Environment Setup for enuma
- Confirm hardware codename by executing "fastboot getvar product" in a terminal; the output must return "enuma".
- Check anti-rollback protection status by running "fastboot getvar anti" to confirm your device allows the target OS build.
- Verify UFS 3.1 storage integrity and ensure the 8600 mAh internal battery holds at least 50% charge before beginning.
- Connect the tablet directly to a rear USB 2.0 port on the computer motherboard using a verified USB Type-C data cable.
- Unlock the bootloader using the official Xiaomi Mi Unlock utility with an approved Mi Account before flashing Fastboot packages.
- Unpack the downloaded Fastboot .tgz archive twice using 7-Zip directly into a short directory path like C:enuma_fw.
Platform Architecture & Hardware Compatibility
Official Fastboot flashing requires an unlocked bootloader via the official Xiaomi Mi Unlock tool. Always choose "clean all" (flash_all.bat) when flashing.
Ready to Flash This Firmware?
Full step-by-step instructions for Xiaomi Pad 5 Pro 5G, including prerequisites, error fixes, and screenshots, are on FlashGuideHub's Mi Flash Tool guide.
Can also be flashed via Fastboot: Open Fastboot Guide →
Xiaomi Pad 5 Pro 5G Hardware & Firmware FAQ
The Xiaomi Pad 5 Pro 5G integrates Qualcomm's Snapdragon 870 (SM8250-AC) paired with an external Snapdragon X55 5G Modem-RF system over PCIe interfaces. Unlike the Wi-Fi-only elish variant, enuma incorporates a physical nano-SIM tray, RF front-end modules, and multi-band antenna arrays supporting Sub-6 5G NR (n1, n3, n28a, n41, n77, n78) and 4G LTE. Firmware builds for enuma include modem and baseband firmware partitions (modem.img) that are completely absent on elish.
Xiaomi configured distinct rear camera hardware between the two 11-inch Pro models. While the Wi-Fi model (elish) uses a 13MP primary sensor, the 5G cellular model (enuma) is equipped with a 50MP 1/2.76" sensor paired with a 5MP depth sensor. Device tree blobs (DTB) and camera calibration partitions inside the vendor image differ between the models, meaning flashing elish camera binaries onto enuma disables 50MP photo capture.
Xiaomi manufactured and marketed the Pad 5 Pro 5G exclusively in Mainland China. Because no official European, Global, or Indian SKUs were produced by Xiaomi, all official Fastboot and Recovery packages carry the CNXM software channel code (such as OS1.0.3.0.TKZCNXM). International owners operate China firmware with Google Mobile Services enabled in system settings or install custom AOSP distributions.
The tablet uses Google's Virtual A/B partition layout with dynamic partitions. A single super partition holds logical partitions for system, system_ext, product, and vendor across active and inactive slots. The device lacks a dedicated physical recovery partition; the recovery ramdisk resides within the kernel boot partition (boot.img). This architecture enables seamless background updates without consuming duplicate physical partition storage.